Philips 32PT6442-37 User Manual

Color TV

Color TV

32PT6441/37
32PT6442/37

3121 235 21521

Model No.:_______________
Serial No.:

User Manual

Thank you for choosing Philips.

Need help fast?

Read your User Manual first for quick tips that

your using your Philips product more enjoyable. If

you have read your instructions and still need

assistance you may access or our online help at

www.p4c.philips.com

or

call 1-800-531-0039

while with your product.

Once your PHILIPS purchase is registered, you’re eligible to

receive all the privileges of owning a PHILIPS product.

So complete and return the Warranty Registration Card

enclosed with your purchase at once. And take advantage of

these important benefits.

Return your Warranty Registration Card today to

ensure you receive all the benefits you’re entitled to.

Congratulations on your purchase, and wel-

come to the “family!” To get the most from
your PHILIPS product, you must return your
Warranty Registration Card within 10 days. So

please mail it to us right now!

Know these

safetysymbols

t This “bolt of lightning” indicates uninsulated material within your unit may cause

an electrical shock. For the safety of everyone in your household, please do not remove
product covering.

s The “exclamation point” calls attention to features for which you should read the

enclosed literature closely to prevent operating and maintenance problems.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully
insert.

ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warranty
Verification

Registering your prod­uct within 10 days
confirms your right to
maximum protection
under the terms and
conditions of your
PHILIPS warranty.

Owner
Confirmation

Your completed
Warranty Registration
Card serves as
verification of owner­ship in the event of
product theft or loss.

Model
Registration

Returning your
Warranty Registration
Card right away guar­antees you’ll receive
all the information and
special offers which
you qualify for as the
owner of your model.

R

E

G

I

S

T

R

A

T

I

O

N

N

E

E

D

E

D

W

I

T

H

I

N

1

0

D

A

Y

S

Hurry!

Visit our World Wide Web Site at http://www.philips.com

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accor

dance with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that
produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and third
grounding prong. The wide blade or third prong are provided
for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete out
let.

10. Protect the power cord from being walked on or pinched par

ticularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to

avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused

for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or
has been dropped.

15.This product may contain lead and mercury. Disposal of these

materials may be regulated due to environmental considerations.
For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance: www.eiae.org

16.Damage Requiring Service - The appliance should be

serviced by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appliance;

or

C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits

a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17.Tilt/Stability - All televisions must comply with recommend

ed international global safety standards for tilt and stability
properties of its cabinet design.

• Do not compromise these design standards by applying exces
sive pull force to the front, or top, of the cabinet which could
ultimately overturn the product.

• Also, do not endanger yourself, or children, by placing electroni
c equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product
damage and/or personal injury.

18.Wall or Ceiling Mounting - The appliance should be

mounted to a wall or ceiling only as recommended by the
manufacturer.

19.Power Lines - An outdoor antenna should be located away

from power lines.

20.Outdoor Antenna Grounding - If an outside antenna

is connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70­1984, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding connectors, loca
tion of antenna-discharge unit, connection to grounding elec
trodes, and requirements for the grounding electrode. See Figure
below.

21. Object and Liquid Entry - Care should be taken so

that objects do not fall and liquids are not spilled into the
enclosure through openings.comply with recommended interna
tional global safety standards for tilt and stability properties of
its cabinet design.

a) Warning: To reduce the risk of fire or electric shock,
this apparatus should not be exposed to rain or mois­ture and objects filled with liquids, such as vases, should
not be placed on this apparatus.

22.Battery Usage CAUTION - To prevent battery leakage

that may result in bodily injury, property damage, or damage to
the unit:

• Install all batteries correctly, with + and - aligned as marked
on the unit.

• Do not mix batteries (old and new or carbon and alkaline,
etc.).

• Remove batteries when the unit is not used for a long time.

Note to the CATV system installer: This
reminder is provided to call the CATV system
installer's attention to Article 820-40 of the
NEC that provides guidelines for proper
grounding and, in particular, specifies that the
cable ground shall be connected to the ground­ing system of the building, as close to the point
of cable entry as practical.

Example of Antenna Grounding
as per NEC - National Electric Code

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

Side 1

PANEL L

AYOUT

PANEL

INDEX

Subject Panel No.

Active Control . . . . . . . . . . . . . . . . .20

Antenna/Cable Basic Connection . . .1
Audio/Video Connections

AV1 Input Jacks . . . . . . . . . . . . . . .4

Component Video Input Jacks . . . .7

Headphone Jack . . . . . . . . . . . . . . .5

Monitor Output Jacks . . . . . . . . . . .8

S-Video Input Jacks . . . . . . . . . . . .6

Side AV Input Jacks . . . . . . . . . . . .5

AutoLock™ Controls

Access Code . . . . . . . . . . . . . . . . .22

Block All Channels . . . . . . . . . . . .24

Block Channels . . . . . . . . . . . . . . .23

Clear All Blocked Channels . . . . .24

Movie Ratings . . . . . . . . . . . . . . . .25

Other Blocking Options . . . . . . . .27

TV Ratings . . . . . . . . . . . . . . . . . .26

Understanding AutoLock™ . . . . .21

Automatically Programming TV . .13

AutoPicture™ Control . . . . . . . . . .29

AutoSound™ Control . . . . . . . . . . .29

Basic Remote Operation . . . . . . . . . .3

Basic Television Operation . . . . . . . .3

Subject Panel No.

Cable Box Connection . . . . . . . . . . .2

Channel Edit . . . . . . . . . . . . . . . . . .14

Timer Controls

Activate Control . . . . . . . . . . . .18-19

Clock . . . . . . . . . . . . . . . . . . . .18-19

Display Control . . . . . . . . . . . .18-19

Specific Channel . . . . . . . . . . .18-19

Start or Stop Time . . . . . . . . . .18-19

Closed Caption Control . . . . . . . . . .28

Demo Mode . . . . . . . . . . . . . . . . . . .27

Factory Service Locations . . . . .36-37

Format Control . . . . . . . . . . . . . . . .17

Language Controls . . . . . . . . . . . . .11

Limited Warranty . . . . . . . . . . . . . .38

Picture Menu Controls . . . . . . . . . .15

QuadraSurf™ . . . . . . . . . . . . . . .30-31

Remote Batteries . . . . . . . . . . . . . . . .3

Remote Button Descriptions . . . .9-10

Rotation Controls . . . . . . . . . . . . . .17

Sleeptimer . . . . . . . . . . . . . . . . . . . .28

Sound Menu Controls . . . . . . . . . . .16

Tuner Mode . . . . . . . . . . . . . . . . . . .12

Active Control, AutoPicture, AutoSound, and Incredible Surround are trademarks of Philips
Consumer Electronics Company. Copyright 2001 Philips Consumer Electronics.*Manufactured
under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.

MODEL
REGISTRATION
INFORMATION

SAFETY

INFO

PANEL

2

PANEL

4

PANEL

3

PANEL

5

PANEL

8

PANEL

10

PANEL

9

PANEL

11

PANEL

14

PANEL

16

PANEL

15

PANEL

17

PANEL

PANEL

1

6

COVER

LIMITED

WARRANTY

(Panel 38)

and

PANEL

PANEL

Panel Index

PANEL

Sequence

Panel

20

22

24

Side 2

PANEL

7

PANEL

21

PANEL

23

PANEL

25

PANEL

PANEL

PANEL

PANEL

12

26

28

30

PANEL

13

PANEL

27

PANEL

29

PANEL

31

PANEL

18

PANEL

32

PANEL

34

PANEL

36

PANEL

19

PANEL

33

PANEL

35

PANEL

37

BASIC

ANTENNA AND CABLE CONNECTIONS

Y

our home’s signal input might

come from a single (75 ohm)
round cable, a Converter Box, or from
an antenna. In either case the connec­tion to the TV is very easy.

1

If your Cable TV signal or
Antenna signal is a round
cable (75 ohm) then you're

ready to connect to the TV.

If your antenna has flat twin­lead wire (300 ohm), you first

need to attach the antenna wires
to the screws on a 300 to 75 ohm
adapter.

If you have a Cable Converter
Box: Connect the Cable TV sig-

nal to the Cable Signal IN(put)
plug on the Converter.

2

Connect the Cable TV cable or
Antenna cable (or 300 to 75 ohm
adapter) to the 75Ω plug on the
TV.

If you have a Cable Converter
Box: Connect the OUT(put) plug

from the Converter to the 75Ω
plug on the TV.

After using the AutoProgram Control,
press the CH + and – buttons to scroll
through all the channels stored in the
television’s memory.

HELPFUL HINT

Back of TV

Cable signal

coming from

Cable Company

Jack Panel

Back of TV

75 ⍀

1

2

ANT 75‰

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

Antenna Connection

300 to 75Ω

Adapter

Combination
VHF/UHF Antenna
(Outdoor or Indoor)

Twin Lead

Wire

Round Cable

75Ω

Back of TV

Direct Cable Connection

75Ω Round

Coaxial Cable

1

1

75 ⍀

ANT 75‰

VIDEO

L/Mono

AUDIO

2

Monitor out

AV2 in

AV1 in

Y

Pb

S-VIDEO

R

Pr

COMPONENT VIDEO INPUT

TO

TV/VCR

CABLE

IN

IR

USB

DVD-D OUT

AUDIO IN

SPDIF

VIDEO

IN OUT

S-VIDEO

R L

AUDIO OUT

TV

PASSCARD

Y Pb Pr

OPTICAL

SPDIF

4

24

ANT 75‰

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

L/Mono

Monitor out

VIDEO

S-VIDEO

AV1 in

Y

Pb

Pr

AV2 in

AUDIO

R

COMPONENT VIDEO INPUT

6

5

C

ABLE BOX CONNECTIONS

2

I

f your cable signal uses a cable

box or decoder, follow the easy
steps below to complete the connec­tion.

Cable Box (w/RF In/Outputs):

This connection will be mono.

1

Connect the Cable Company
supplied cable to

the signal
IN(put) plug on the back of the
Cable Box.

2

Using a separate round coaxial
cable, connect one end to the

OUT(put)

(TO TV) plug on the

back of the Cable Box.

3

Connect the other end of the
round coaxial cable to the 75Ω

input on the back of the televi­sion. Screw it down finger tight.

NOTE: If applicable, set the OUT­PUT CHANNEL SWITCH on the
back of the cable box to CH 3 or 4.
Tune the TVto the same channel and
change channels at the cable box. In
some cases, the cable box will auto­matically tune to either channel 3 or 4,
change channels until the picture
appears.

Cable Box (w/Audio/Video
Outputs):

This connection will supply Stereo
sound.

4

Connect the Cable Company
supplied cable to

the cable sig­nal IN(put) plug on the back of
the Cable Box.

5

Using a RCA type Video Cable,

connect one end of the cable to
the Video (or ANT , your cable

box may be labeled differently)

Out jack on the cable box and
the other end to the AV1 Video
Input on the TV.

6

Connect one end of the Audio
Left and Right Cable to the left

and right Audio Out L& R
jacks on the cable box. Connect

the other end to the AV1 Audio L
& R Input jacks on the TV.

NOTE: Use the CH+ or CH- on the
TV remote control to tune to the AV1
channel for the cable box signal. Once
tuned, change channels at the cable
box, not the television.

Jack Panel Back of Cable Box

Cable Signal IN from the

Cable Company

Round 75Ω

Coaxial Cable

Jack Panel Back of TV

Cable Signal IN

from the Cable

Company

Cable Box with A/V Outputs

Jack Panel Back of TV

Audio Cables
L (White) & R (Red)

Video Cable

(Yellow)

Cable Box (w/RF In/Outputs):

Cable Box (w/Audio/Video Outputs):

2

TO

TV/VCR

1

CABLE

3

DVD-D OUT

IR

IN

USB

75 ⍀

VIDEO

AUDIO IN

SPDIF

IN OUT

R L

S-VIDEO

Y Pb Pr

AUDIO OUT

TV

PASSCARD

OPTICAL

SPDIF

ANT 75‰

Monitor out

AV2 in

AV1 in

VIDEO

Y

L/Mono

Pb

AUDIO

S-VIDEO

R

Pr

COMPONENT VIDEO INPUT

POWER

3

+

–

VOLUME

+

–

CHANNEL

2

1

BASIC TV

AND REMOTE CONTROL OPERATION

3

1

Press the POWER button to
turn the TV ON.

Note: You can also press any
button on the front of the TV to
turn the TV ON.

2

Press the VOLUME + button
to increase the sound level, or
the VOLUME – button to
lower the sound level.

Pressing both buttons at the
same time will display the on-

screen menu. Once in the
menu, use these buttons to
make adjustments or selections.

3

Press the CHANNEL UP + or
DOWN – button to select TV

channels.

4

Point the remote control
toward the remote sensor win­dow on the TV when operating
the TV with the remote.

REMOTE CONTROL

T

o load the supplied batteries
into the remote:

1. Remove the battery compart­ment lid on the back of the remote.

2. Place the batteries (2-AA) in
the remote. Be sure the (+) and (-)

ends of the batteries line up correct­ly (inside of case is marked.)

3. Reattach the battery lid.

Standby Light Indicator - Red light will show

when in the Standby Mode. Press the Power
button to return the TV to it’s active state.

Remote Sensor - Sensor for

activating remote control com-

mands when the remote is

used to control the TV.

Battery Compartment

2-AA Batteries

Battery Lid

Back of Remote

4

VOL

AV (AUDIO/VIDEO) I

NPUT CONNECTION

4

Monitor out

Audio and video cables are not sup­plied with the TV, but are available
from Philips or electronics retailers.

HELPFUL HINT

Audio In
(Red and

White)

VCR Two (or accessory

device) (Equipped with

Video and Audio Output Jacks)

Video In

(Yellow)

Back of VCR

Back of TV

AV1

Connection

AV2 Connection

VCR One (or

accessory device) (Equipped

with Audio and Video Output

Jacks)

T

he TV’s audio/video input jacks

are for direct picture and sound
connections between the TV and a
VCR (or similar device) that has
audio/video output jacks. Both the
AV1 and AV2 Input Jack connections
are shown on this page, but either
one can be connected alone. Follow
the easy steps below to connect your
accessory device to the AV1and AV2
IN Jacks located on the back of the
TV.

1

Connect the VIDEO (yellow)
cable to the VIDEO AV1 IN (or

AV2 IN) jack on the back of the
TV.

2

Connect the AUDIO (red and
white) cables to the AUDIO (left

and right) AV1 IN (or A V2 in)
jacks on the rear of the TV.

3

Connect the VIDEO (yellow)
cable to the VIDEO OUT jack on

the back of the VCR (either one
or two) or accessory device being
used.

4

Connect the AUDIO (red and
white) cables to the AUDIO (left

and right) OUT jacks on the rear
of the VCR (either one or two) or
accessory device being used.

5

Turn the VCR (either one or
two) or accessory device and
the TV ON.

6

Press the CH+ or CH- buttons set
the TV to its AV1or AV2 channel.

7

With either of the VCRs (or
accessory devices) ON and a pre­recorded tape (CD, DVD, etc.)
inserted, press the PLAY button
to view the tape on the television.

VIDEO

L/Mono

AUDIO

R

1

AV1 in

Y

Pb

Pr

COMPONENT VIDEO INPUT

AV2 in

3

S-VIDEO

5

5

ANT/CABLE

OUT

ANT/CABLE

OUT

4

2

S-VIDEO

S-VIDEO

OUT

2

R L

VIDEO

AUDIO OUT

OUT

1

OUT

4

7

R L

VIDEO

AUDIO OUT

OUT

3

7

SIDE AV C

ONNECTIONS

5

A

udio and Video Side Inputs are

available for a quick connec-

tion of a VCR, to playback video
from a camera, or attach a gam­ing device. Use the AV button on
the remote control to tune these
inputs.

1

Connect the video (yellow)
cable from the Video output

on the Camera (or accessory
device) to the Video (yellow)
Input located on the SIDE of
the TV.

2

For Stereo Devices: Connect
the audio cable (red and
white) from the Audio Left
and Right Outputs on the
Camera to the Audio In
(white) jack on the SIDE of
the television.

For Mono Devices: Connect
one end of the audio cable
from the Audio Out jack on
the device to the Audio In
(white) jack on the SIDE of
the television.

3

Turn the TV and the accesso­ry device ON.

4

Press the CH+ or CH- but­tons on the remote control to

tune the TV to the side input
jacks. “Front” will appear on
the TV screen.

5

Press the PLAY  button

on the accessory device to
view playback, or to access
the accessory device (camera,
gaming unit, etc.).

Front

Side Jack panel

of TV

Audio

Cables

Video

Cable

Jack Panel of Accessory Device

Optional

Headphones

3
5

3

1

VIDEO

L

2

AUDIO

R

VIDEO

AUDIO

S-VIDEO

LEFT RIGHT

4

VOL

S-VIDEO (S-V

HS) INPUT CONNECTIONS

T

he S(uper)-Video connection on

the rear of the TV can provide
you with better picture detail and
clarity for the playback of accessory
sources such as DBS (digital broad­cast satellite), DVD (digital video
discs), video games, and S-VHS VCR
(video cassette recorder) tapes than
the normal antenna picture connec­tions.

NOTE: The accessory device must
have an S-VIDEO OUT(put) jack in
order for you to complete the connec­tion on this page.

1

Connect one end of the S­VIDEO CABLE to the S-

VIDEO jack on the back of the
TV. Then connect one end the
AUDIO (red and white)
CABLES to the AV1 in AUDIO
L and R (left and right) jacks on
the rear of the TV.

2

Connect other end of the S­VIDEO CABLE to the S-VHS

(S-Video)OUT jack on the back
of the VCR. Then connect the
other ends of the AUDIO (red
and white) CABLES to the
AUDIO (left and right) OUT
jacks on the rear of the VCR.

3

Turn the VCR and the TV
ON.

4

Press the CH + or CH – but­tons on the remote to scroll the

channels until SVHS appears in
the upper left corner of the TV
screen.

5

Now your ready to place a pre­recorded video tape in the VCR
and press the PLAY button

.

VCR or External

Accessory Device

(with S-Video

Output)

Audio Cables

(Red &

White)

S-Video

Cable

Back of TV

6

Monitor out

VIDEO

L/Mono

AUDIO

R

2

AV1 in

Y

Pb

Pr

COMPONENT VIDEO INPUT

AV2 in

1

S-VIDEO

2

3

L R
AUDIO OUT

S-VIDEO

VIDEO

OUT

ANT/CABLE

OUT

OUT

1

5

4

VOL

COMPONENT VIDEO

(CVI) INPUT C

ONNECTIONS

C

omponent Video inputs provide

for the highest possible color
and picture resolution in the play­back of digital signal source materi­al, such as with DVD players. The
color difference signals (Pb, Pr) and
the luminance (Y) signal are con­nected and received separately,
which allows for improved color
bandwidth information (not possible
when using composite video or S­Video connections).

1

Connect the Component (Y,
Pb, Pr) Video OUTjacks from

the DVD player (or similar
device) to the (Y, Pb, Pr) in(put)
jack on the TV. When using the
Component Video Inputs, it is
best not to connect a signal to the
AV in Video Jack.

2

Connect the red and white
AUDIO CABLES to the Audio

(left and right) output jacks on
the rear of the accessory device
to the Audio (L and R) AV1 in
Input Jacks on the TV.

3

Turn the TV and the DVD (or
digital accessory device) ON.

4

Press the CH + or CH – but­tons to scroll the available

channels until CVI appears in
the upper left corner of the TV
screen.

5

Insert a DVD disc into the
DVD player and press the

PLAY  button on the DVD
Player.

The description for the component video
connectors may differ depending on the
DVD player or accessory digital source
equipment used (for example, Y, Pb, Pr; Y,
B-Y, R-Y; Y, Cr, Cb). Although abbrevia­tions and terms may vary, the letters b and r
stand for the blue and red color component
signal connectors, and Y indicates the lumi­nance signal. Refer to your DVD or digital
accessory owner’s manual for definitions and
connection details.

HELPFUL

HINT

Component

Video Cables

(Green, Blue,

Red)

Audio

Cables

(Red &

White)

Accessory Device

Equipped with

Component Video

Outputs

Back of TV

The CVI connection will be dominate over the AV1
in Video Input. When a Component Video Device is
connected as described, it is best not to have a video

signal connected to the AV1 in Video Input jack.

7

Monitor out

VIDEO

L/Mono

Y

AUDIO

R

COMP VIDEO

COMPONENT VIDEO INPUT

1

3

AV2 in

AV1 in

2

Y

Pb

Pr

S-VIDEO

VIDEO

Pb

OUT

OUT

Pr

S-VIDEO

AUDIO

R

OUT

L

5

4

VOL

MONITOR

OUT(PUT) CONNECTIONS

8

T

he Audio/Video (Monitor) Output

jacks are great for recording with
a VCR or used to connect an exter­nal audio system for better sound
repr oduction.

AUDIO SYSTEM
CONNECTION:

1

Connect one end of the
R(ight) and L(eft) AUDIO
(Monitor Out) jacks on the TV

to the R and L audio input jacks
on your amplifier or sound sys­tem. Set the audio system’s vol­ume to a normal listening level.

2

Turn the TV and audio sys­tem ON. To adjust the volume

on the audio system, you will
need to change the volume at
the external audio system, not
the television.

SECOND VCR CONNECTION:

NOTE: Refer to panel number 4 for
the proper hookup of the first VCR.
Follow the instructions on how to
tune to the AV1 channel to view a
pre-recorded tape.

The following steps allow you to
connect a second VCR to record
the program while your watching
it.

3

Connect one end of the yellow
Video Cable to the Monitor

Out VIDEO plug. Connect the
other end to the VIDEO IN plug
on the second VCR.

4

Connect one end of the red
and white Audio cable from

the Monitor Out AUDIO Land
R plugs on the TV to the
AUDIO IN plugs on the VCR.

5

Turn the Second VCR ON,

insert a VHS tape and it’s
ready to record what’s being
viewed on the TV screen.

Back of TV

Audio Cables

(Red and White)

Back of TV

Audio

Cables

1st VCR

(refer to panel 4 for

proper connection)

Video
Cable

2nd VCR with Audio and

Video Input Jacks

SECOND VCR CONNECTION:

AUDIO SYSTEM CONNECTION:

3

Monitor out

VIDEO

L/Mono

AUDIO

R

COMPONENT VIDEO INPUT

AV2 in

AV1 in

Y

Pb

Pr

S-VIDEO

1

R

L

T

U

P

IN

V

/T

X

U

A

T

U

P

IN

O

N

O

H

P

2

AV1 in

Y

Pb

Pr

COMPONENT VIDEO INPUT

RL

4

AV2 in

S-VIDEO

ANTENNA

OUTOUT

IN

VIDEO

LR

AUDIO

ANTENNA

OUT

IN

IN

Monitor out

VIDEO

L/Mono

AUDIO

R

ANTENNA

OUT OUT

IN

AUDIO

VIDEO

ANTENNA

OUT

IN

IN

5

REMOTE CONTROL

BUTTON DESCRIPTIONS

9

QUADRASURF Buttons (Red, Green,
Yellow, Blue) Allows you to store and
surf up to 10 channels you choose for
each colored button.

SMILEY

Button - Press to add channels

to the “QuadraSurf” lists. Works with all
colored buttons.

TV/VCR/ACC Mode Switch

- Slide to
position of TV to control TV functions,
VCR to control VCR, and ACC for Cable
Converter, DBS, DVD, etc., functions.

AUT

O SOUND Button - Press repeated-

ly to choose from different factory pre­defined sound settings. Choose from
Personal (how you set the Sound Menu
options), Voice (for programming with
speaking only), Music (for musical type
programs such as concerts), or Theatre
(used when watching movies).

MENU

Button - Press to display the on-

screen menu. Also can be used to back
out of the on-screen menu until it disap­pears from the TV’s screen.

V

OL(ume) + or - Buttons - Press the

VOL + button to increase the TV’s sound
level. Press the VOL – button to decrease
the TV’s sound level.

MUTE Button

- Press the mute button to
eliminate the sound being heard from the
TV. “MUTE” will be displayed on the
TV’s screen. Press again to restore the
TV’s volume to it’s previous level. press­ing this button for 3-4 seconds will acti­vate the Demo Mode. (See panel 27 for
more details.)

CLOCK (TV/VCR) Button

- Press to
display the Timer menu when in TV
mode.

00

VCR Record Button - Press to start a

VCR recording of a TV program.

CC Button

- Press to activate the Closed
Captioning options. Repeatedly pressing
the CC button will scroll the available
options on the TV screen.

VOL