Philips 42PFL3457/V7, 32PFL3057/V7 User Manual
42PFL3457/V7
32PFL3057/V7
EN User manual
Contents
EN 1
1 Notice 2
2 Important 3
5
Equipment connection
4.1 Name and Function of Control
7
3 Antenna and External
on Set
20
20
8
20
20
Product information
Supported display resolutions
USB
Tuner/Reception/Transmission
Remote control
Power
Supported TV mounts
Product Specification
20
20
21
21
4.2 Name and Function of Control
on Remote
4.3 Battery Installation
5.2
5.3 Sound Menu
5.6 Features Menu
5.5 Installation Menu
7 Troubleshooting
4 Use your TV
Picture Menu
Use more of your TV5
Access TV menus
5.1
5.4 Parental Menu
7
8
11
12
12
12
13
13
14
15
19
6 Play photos,music and videos
16
on USB storage devices
2 EN
1 Notice
Pixel characteristics
This LCD/LED product has a high number of
color pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and official repair shops. Failure
to do so shall void any warranty, stated or
implied.
Any operation expressly prohibited in
this manual, any adjustments, or assembly
procedures not recommended or authorised in
this manual, shall void the warranty.
EN 3
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire !
Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
Never place the TV, remote control or .
batteries near naked flames or other heat
sources, including direct sunlight.
To prevent the spread of fire, keep
candles or otherflames away from the
TV, remote control and batteries at all
times.
Never insert objects into the ventilation
slots or other openings on the TV.
When the TV is swiveled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Never expose the remote control or
batteries to rain, water or excessive heat.
Avoid force coming on to power plugs.
Loose power plugs can cause arcing or
Risk of injury or damage to the TV !
Two people are required to lift and carry
a TV that weights more than 25 kg.
fire.
Risk of electric shock or fire !
When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on flat
, level
surface that can support the combined
weight of the TV and the stand.
When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of the
TV and wall mount. PE Electronics Ltd. bears
that result in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
Ensure that no part of the TV hangs over
the edge of the surface.
Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of overheating!
Never install the TV in a space.
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
Risk of injury, or power cord damage!
Never place the TV or any objects on the
power cord.
To disconnect the TV power cord easily
from the power outlet, ensure that you
have full access to the power cord at all
times.
confined
fire
no responsibility for improper wall mounting
4 EN
4 EN
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you disconnect the power cord,
always pull the plug, never the cable.
Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
If the TV is transported in temperatures
below 5
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Screen care
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and color fading,
wipe off water drops as soon as possible.
C, unpack the TV and wait
ANT IN
ANT IN
Y1 Pb1 Pr1 L1
YPbPr1
AV1
Av1R1
L
YPbPr1
AV1
Av1R
ANT IN
1. The aerial cable should not be bundled to the power cord.
COMPONENT (YCbCr/YPbPr) DVD INPUT
1. Connect the component outputs (YCbCr / YPbPr) of
DVD player to the component (YPbPr) input of the
the TV.
2. Connect audio outputs (L,R) of a DVD player to the
audio input (YPbPr) respectively.
3. Press the PLAY button on the DVD player.
VIDEO INPUT
1. Connect the component outputs VIDEO out
of VCR/Cable receiver to AV1, AV2.
2. Connect audio outputs (L, R) of a DVD player to the
audio input AV1, AV2 respectively.
3. Press the PLAY button on the VCR.
Note : Selecting a Source
Press SOURCE key on remote or on front panel keypad.
Press TV key on the remote to enter into TV source from any other source,
EN 5
3 Antenna and External Equipment Connection
A source OSD will appear. Press Up/Down key on the remote or CH+ /CH- on
or VOL’+' key from front panel to enter selected source or press SOURCE key
repeatedly to change and select source.
front panel can be used to select source. Press OK/Right key on the remote
except USB source.
ent such as VCR,DVD player
HDMI
3. Switch on the PC and PC screen appears on the set.
The set can be operated as PC monitor.
HDMI socket (HDMI1,HDMI2,HDMI3) on the TV.
USB
Connect / Insert standard USB and select USB
source on source OSD by pressing SOURCE key.
Press OK / Right key on remote, connected USB is
Listed, press OK to enter in selected USB .
Similarly front panel keys CH+/- and VOL+ can be
operated as Up/Down and OK/Right keys on remote
respectively.
HDMI
USB
NOTE :
1) CH+/CH- keys on remote are represented by - CH + on TV set.
VOL+/VOL- keys on remote are represented by on TV set.
6 EN
Note :
1) Above Sketches are just representation. Actual TV set may look different than these sketches.
10
1) LED INDICATOR
2) IR SENSOR
3) STAND BY
4) SOURCE (TV/AV)
5) MENU
6) CH-
7) CH+
8) VOL-
9) VOL+
10) AC POWER IN
11) USB
12) HDMI 3
22) RIN1
23) VIN1
24) AV OUT
25) R2 (IN)
26) L2 (IN)
27) AV2 (IN)
13) HDMI 2
14) HDMI 1
15) VGA IN
16) Y1
17) Pb1
18) Pr1
19) VGA AUDIO IN
20) ANT IN
21) LIN1
A) Front Panel Control/Keys (Optional)
2
3
1
4
5
6
7
8
9
EN 7
4 Name and Function of Control on Set
11
12
15
20
19
16
17
18
21
22
23
24
13
14
USB
HDMI 3 HDMI 2 HDMI 1 VGA IN
Y Pb
Pr
VGA
AUDIO IN
ANT IN
LIN1 RIN1
VIN1
AV OUT
R2
L2
AV2
27
26
25
Pr2
Pb2
Y2
30
29
28
28) Pr2 (Optional)
29) Pb2 (Optional)
30) Y2 (Optional)
Loading...