Philips 28PW9513 User Manual

English

Contents

Installation

Your remote control ________________________________________2

Preparation _______________________________________________3

Installation_________________________________________________4

Store TV channels

Select the menu language and country ______________________4

Automatic installation ___________________________________5

Manual installation ______________________________________5

Give name_________________________________________________6

Reshuffle the programme list _________________________________6

Select favourite TV channels __________________________________6

Install TV setup_____________________________________________7

English

Operation

Use of the remote control __________________________________8-9

Use of the menus

Picture menu __________________________________________10

Sound menu___________________________________________10

Features menu_________________________________________12

Teletext _________________________________________________14

Connect peripheral equipment ___________________________16

Tips ____________________________________________________21

Index ___________________________________________________21

Lexicon ________________________________________________22

EasyLink features are based on the "one touch operation" approach. This means that a sequence of actions are executed at the same time in both the television and the video cassette recorder, provided both are fitted with the EasyLink function and connected with the eurocable supplied.

Your remote control

yÚ

p. 19 u selection of EXT1, EXT2,

EXT3 or FRONT

p. 9 X bilingual choice + sound info p. 9 j continuous subtitles p. 9 i info on screen

Teletext

p. 14 f solution to riddles

d mix tv/txt picture - hold h enlarge U subpage selection / time display

p. 9 s personal preferences

P reduce image noise ﬁ strobe S freeze the picture

p. 4

B select your choice

p. 4 È activate your choice p. 10 k picture menu p. 10 k sound menu p. 12 k features menu

p. 8 ‡ programme list

F surround mode

selection

;

yÚ

ﬁ

54 6

87 9

◊

p. 4

p. 8 B switch to standby

p. 8 V volume key

Installation

P programme selection

¬ temporarily switch sound off 0 previous programme

31 2

p. 14 b teletext on/off p. 8 q picture format

Smart Controls

p. 8 a picture

M sound

p. 13 æ programme guide on/off p. 13 b dual screen

Preparation

FRONT

REAR

CABLE

c d

RO3 / AAA

& Place the TV on a solid surface.

For ventilation, leave at least 5 cm free all around the TV. To prevent any unsafe situations, do not place any objects on top of the TV.

é Insert the aerial plug tightly into the aerial socket x at the back of the TV.

You can improve the picture quality by using the suppressor aerial cable supplied.

“ Ensure the loudspeaker switch at the back of the TV is in the l position.

‘ Connect the two Surround Sound rear loudspeakers supplied to the connector

clips at the back of the TV. Always connect both Surround Sound loudspeakers: the left rear loudspeaker at

REAR R.

REAR L; the right rear loudspeaker at

Push the connector clip down and insert the end of the wire into the opening: the positive wire (the one with the black line) to the red loudspeaker connection; the negative wire to the black loudspeaker connection. Do not insert the wires too far. The Surround Sound loudspeakers should always be located behind or to either side of the listener. If preferred you can also hang the loudspeakers on the wall.

( Insert the mains plug in the wall socket with a mains voltage of 220V-240V.

§ Remote control: Remove the cover of the battery compartment.

Insert the 2 batteries supplied (Type R03G-1,5V).

The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries exhausted batteries may not be disposed of with your household waste. Please ensure you dispose of exhausted batteries according to local regulations.

è Switch TV on: Press the power switch A on the front of your TV.

A green indicator and the screen light up. If the indicator is red, press the P key on the remote control.

The green lamp blinks every time you press a key on the remote control. When you switch on your set for the first time, the menu

LANGUAGE automatically

appears on the screen. Alternatively the explanation appears in the different languages. Choose your own language and press the OK key on the remote control. Go on to page 4.

jiX

ﬁ

yÚ

f U

Select

Activate

Installation

Select the INSTALLATION MENU :

& Open the door of the remote control. é Press f and U at the same time.

To use the menus

& Use the B keys to select a menu item. é Use the OK key to activate. “ Use the red

MENU TITLE

Subject 1 Subject 2 Subject 3

J Subject 4

J Subject 4 L M

Subject 5 Subject 6

MENU key to return or to switch menu off.

J INSTALLATION

MENU TITLE

Menu language Country

Automatic Installation

J Menu Language

MENU TITLE

English

....

J Country

MENU TITLE

United Kingdom

....

Store TV channels

If the TV is connected to a video recorder with the EasyLink function, the TV automatically transfers the language and country selections to the video recorder. After the new or extra TV channel(s) ha(ve)s been stored, the TV automatically transfers that (those) TV channel(s) to the video recorder.

The message EasyLink : Downloading ...... appears on the screen.

The programme list of the video recorder is now equal to the one of the TV.

Select the menu language and country

First, you have to select your language and your country.

& Select the menu Language and press the OK key.

é Select your language and press the OK key.

“ Select Country and press the OK key.

‘ Select the country where you are now located and press the OK key.

Select Other when none of the countries applies.

You can now search for and store the TV channels in two different ways: using automatic installation or manual installation (tuning-in channel by channel).

• Select your choice and press the OK key.

Automatic Installation

Start Stop

J Stop K

Automatic installation

In the Automatic Installation menu select Start and press the OK key to activate the searching. All TV channels are searched for and stored automatically.

TV is searching one moment please ...

Automatic Installation

J Start K

Start Stop

1 BBC1 2 BBC2 3 CNN

....

Manual Installation

(Selection Mode)

J System K

System Programme No. Search Store

If a cable system which broadcasts ACI (Automatic Channel Installation) or a TV channel transmitting a teletext page with the frequencies and programme names of all the TV channels which can be received, is detected, the search is stopped and a programme list appears. The programme list is automatically filled with all the programme numbers and names of the TV channels transmitted.

It is possible that the cable company or the TV channel displays a broadcast selection menu. Layout and items are defined by the cable company or the TV channel. Make your choice with the B keys and press the OK key.

To exit from the menu

• Press the red MENU key.

Go on to page 6.

Manual installation

Searching for and storing TV channels is done channel by channel. You must go through every step of the Manual Installation menu.

Selection Mode is only present and lights up if the country you selected also offers the channel option (C-channels for aerial channels, S-channels for cable channels). You can choose either channel or frequency mode.

& Select the TV system

• Select the country or part of the world from where you want to receive the

TV channel. If you are connected to a cable system, select your country.

é Enter the programme number with the digit keys. “ Search for a TV channel

The frequency or the channel number increases until a TV channel is found. In case of poor reception, you can improve the reception by adjusting the frequency with the

P key.

Direct selection of a TV channel

If you know the frequency, or the C- or S-channel number, enter it directly with the digit keys 0 to 9. Ask for a list from your cable company or dealer, alternatively consult the Table of frequencies on the inside backcover of this handbook.

‘ Store steps & till “

• Select Store and press the OK key.

Repeat every step to store another TV channel.

To exit from the menu :

• Press the red MENU key.

INSTALLATION

Menu Language Country

Automatic Installation Manual Installation

J Give Name

Give Name Reshuffle Favourite Programmes

Connection diagrams

SETUP

Give Name

EXT1 EXT2 EXT3 FRONT 0

J 0

1 BBC1 2 BBC2

3 ....

4 ....

5 ....

Reshuffle

EXT1 EXT2 EXT3 FRONT 0 BBC1

J 1 CNN

1 CNN 2 BBC2

3 ....

4 ....

5 ....

Give name

It is possible to change the name stored in the memory or to assign a name to a TV channel which has not yet been entered. A name with up to 5 letters or numbers can be given to the programme numbers 0 to 99. For example SUPER, BBC1,... Between 99 and 0 you can also name any peripherals that are connected.

& Select Give Name in the

INSTALLATION menu and press the OK key.

é Select the programme number. “ Press the OK key. ‘ Select the character with the EF keys. ( Select the following position with the CD keys.

§ Select the following character. è Press the OK key when finished. ! Press the red

MENU key to return to the INSTALLATION menu.

A space, numbers or other special characters are located between Z and A.

Reshuffle the programme list

According to your preference you can change the order of the stored TV channels.

& Select Reshuffle in the é Select the programme number you want to change. “ Press the OK key. ‘ Select the new number. ( Press the OK key.

Repeat the operation until all TV channels are allocated as you like.

§ Press the red

MENU key to return to the INSTALLATION menu.

INSTALLATION menu and press the OK key.

Favourite Programmes

0 .... No

1 .... Yes

J 2 .... Yes

2 .... Yes

3 .... No

4 .... No

5 .... Yes

Select Favourite TV channels

After leaving the installation you can browse through the TV channels by pressing the list will be displayed. The non-favourite TV channels can still be selected with the digit keys.

& Select Favourite Programmes in the

OK key.

é Select your favourite programme number. “ Select Yes or No. ‘ Repeat for every TV channel you want to change into a favourite or a non-

favourite TV channel.

( Press the red

If the TV is connected to a video recorder with the EasyLink function, the TV automatically transfers the reshuffled or modified TV channels to the video recorder. The message EasyLink : Downloading Presets ... appears on the screen. The programme list of the video recorder is equal again to the one of the TV.

P key. Only those TV channels which are in the favourite

INSTALLATION menu and press the

MENU key to return to the INSTALLATION menu.

INSTALLATION

Menu Language Country

Connection diagrams

Automatic Installation Manual Installation Give Name Reshuffle Favourite Programmes

Connection diagrams

SETUP

J SETUP

SETUP

J CD-i/Photo CD

CD-i/Photo CD Decoder/Descrambler (Picture Tilt) Information Line Auto Format Yes/No INSTALLATION

Decoder/Descrambler

J Programme

Programme Decoder Status

See Connect Peripheral Equipment, p. 16.

Install TV Setup

& Use the B keys to select the menu item. é Use the OK key to activate. “ Use the red

CD-i / Photo CD

See Connect Peripheral Equipment, TV and a CD-i / Photo CD, p. 17.

Define Decoder/Descrambler programme numbers

If you have connected a decoder or a descrambler, see p. 16, you can define one or more programme numbers as decoder programme numbers.

• Press the CD keys to select Off, EXT1 or EXT2, the euroconnector where

you connected your decoder.

• Select Off if you do not want the selected programme number being activated

as a decoder programme number.

Select

When selecting the decoder, the message EasyLink: Downloading Presets....

appears on the screen.

MENU key to return or switch menu off.

EXT2 when the decoder is connected to your EasyLink video recorder.

Picture Tilt (only for 32” or 82 cm sets)

• Select Picture Tilt with the EF keys.

• Keep the CD keys pressed to adjust the rotation of the picture.

Information Line

After the selection of a TV programme or after pressing the i key on the remote control, a TV channel which broadcasts teletext may transmit the name of the TV channel or the programme name or another message which appears briefly in the information line on the screen. When selected Off, the information line will only appear after pressing the i key, and not after the selection of a TV channel.

Auto Format

Selecting Auto Format Yes, the screen will automatically be filled as much as possible with the picture in case of no PALplus transmission or when TV programmes are not carrying special signals detecting the correct screen format. With the q key on the remote control you can still select other picture formats (see p. 9).

Installation

Select Installation and press the OK key to return immediately to the

INSTALLATION menu.

To exit from the menu

‘ Keep the red

MENU key pressed.

+ 15 hidden pages