Philips 27HT7210D-27B, 27HT4000D-27B, 27HT4000D, 27HT7210D User Manual

Solutions
__________________________
__________________________
Thank you for choosing Philips.
Need help fast?
Read your Quick Use Guide and/or Owner's Manual first for quick tips
that make using your Philips product
more enjoyable.
If you have read your instructions
and still need assistance,
you may access our online help at
www.bds.philips.com
or call
1-866-358-9601
while with your product
(and Model / Serial number)
S
T
O
P
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . .3
Safety Information / Useful Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Calling Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Basic TV Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Jack Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Controls K e y s - G u e s t . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Low Battery Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
8
Activating TV Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
TV Setup Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TV Setup & Sub-menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 19
27HT4000D Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Glossary (Definitions, Acronyms, Abbreviations) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 23
Cleaning & Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product End-of-life Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note : Specifications in this manual are subject to change without notification.
Introduction
Basic Installation/Functions
TV Installation
Recycling Directive – To minimize harm to the environment, the batteries supplied with the TV set do not contain mercury or nickel cadmium. If possible, when disposing of batteries, use recycling
means available to you.
Yo
ur TV set uses materials which are reusable or which can be recycled. To minimize the
amount
of waste in the environment, certain companies recover used sets for dismantling and
collection
of reusable materials (contact your dealer or local recycling resources).
Cabinet Dimension Drawings
Appendix
4
27HT7210D Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . .21
24 24
9 9
24 25
6
TABLE OF CONTENTS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and third grounding prong. The wide blade or third prong are provided for your safety. When the pro­vided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. O
nly use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table speci­fied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This product may contain lead and mercury. Disposal of these materi­als may be regulated due to environmental considerations. For dis­posal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org
16. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B.
Objects have fallen, or liquid has been spilled into the appliance;
or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a
marked change in performance;
or
E. The appliance has been dropped,
or the enclosure damaged.
17
. Tilt/Stability - All televisions must comply with recommended inter-
national global
safety standards for tilt and stability properties of its
cabinet
design.
·
Do not compromise these design standards by applying excessive
pull
force to the front, or top, of the cabinet which could ultimately
overturn the product.
·
Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top
of the cabinet. Such items could unsus­pectingly fall from the top of the set and cause product damage and/or personal injury.
18
. Wall or Ceiling Mounting - The appliance should be mounted to a wall
or ceiling only as recommended by the manufacturer.
19
. Power Lines - An outdoor antenna should be located away from power
lines.
20
. Outdoor Antenna Grounding - If an outside antenna is connected to
the
receiver, be sure the antenna system is grounded so as to provide
some protection against
voltage surges and built up static charges.
Section 810
of the National Electric Code, ANSI/NFPA No. 70-1984,
provides information with respect
to proper grounding of the mast and
supporting structure, grounding
of the lead-in wire to an antenna dis-
char
ge unit, size of grounding connectors, location of antenna-dis­charge unit, connection to grounding electrodes, and requirements for the grounding
electrode. See Figure below.
21
. Object and Liquid Entry - Care should be taken so that objects do not
fall and liquids are not spilled into the enclosure through openings.
22. Battery Usage CAUTION - To prevent battery leakage that may result in bodily injury
, property damage, or damage to the unit:
· Install all batteries correctly, with + and - aligned as marked on the
unit
· Do not mix batteries (old and new or carbon and alkaline, etc.)
· Remove batteries when the unit is not used for a long time.
Know these
safety
symbols
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTIO N: TO R EDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SER­VICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indicates uninsulated material within your unit which may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, this appliance should not be exposed to rain or mois­ture and objects filled with liquids, such as vases, should not be placed on this apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la bome correspon­dante de la prise et pousser jusqu’au fond.
12.
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article
820-40 of the NEC that provides
guidelines for proper grounding and,
in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical
.
GROUNDING CONDUCTORS (NEC SECTION 810-21)
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE EQUIPMENT (NEC ART 250, PART H)
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
ANTENNA LEAD-IN WIRE
GROUND CLAMP
SAFETY INFORMATION AND USEFUL TIPS
the red light below the TV screen is flashing continuously.
- a bright white line is displayed across the screen.
- cleaning the TV screen. Do not use abrasive cleaning agents. Use a slightly damp chamios leather or soft cloth.
- there is lightning or thunder storm
- the set is left unattended for a prolonged period of time.
BEFORE CALLING SERVICE
yourself.
BASIC TELEVISION CONNECTION
ANTENNA CONNECTION
FRONT PANEL STANDBY POWER
(EXAMPLE)
REMOTE STANDBY POWER
1 2 3
4
5 6
7 8
9
0
VOL CH
MENU OK
MUTE
AUTO
PICTUR
E
AUTO
SOUN
D
A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV
SAP
A/CH
CC INFO
CONNECTION
to the product labelling and
television from the AC mains. It toggles the TV
b
the TV set on.
:
Installation
in this documentation for more informaton.
control.
the positive + and negative - polarity line up correctly as indicated
: Always remove batteries from the remote control if it is not used for
USE & CARE OF REMOTE CONTROL
REAR JACK PANEL CONNECTIONS
mu
J-12) connector.
Pb
Y
Pr
L
Audio
Video In
S-VIDE
O
Component Video Input
R
L
R
Monitor
Out
Smart Plug
Ext Spkr
SmartCard slot
& cover
RJ12
Note :
1. Do not connect Video In and S-Video simulta­neously.
2. When a Smart Card with Audio/Video and
S-
Video inputs
are installed into the Smart Card
slot, the inputs
on the Smart Card cannot be
connected concurrently with the Video In or
S­Video and Audio L/R In of the TV set or vice versa. In this case, you can only use either the inputs
on the Smart Card or TV set. When connecting Y Pb Pr inputs to the 27HT4000D/27, please note that the correct Audio­In connectors should be the Red & White jack
s
under the label AV2 In, and not under AV1 In
.
Pb
Y
Pr
L
S-VIDE
O
AV1 in
R
L
R
Monitor
Out
Applicable to 27HT7210D/27 only
Applicable to 27HT4000D/27 only
AV2 in
3.
REMOTE CONTROLS
When in setup mode, press
on the
You'll see an information screen that describes the
with a SmartPort DCM (such as a CLON99BK
POWER
SLEEP
GUID
E
CH
CC
RESE
T
CLOCK A / V
SMART
GUEST
DCM
SETUP
TEXT
RECALL
M
A
E F G
DB C
A/CH
VOL CH
1
4
7
809
2
5 6
3
+
++
_ _
_
RC2573GR
(optional)
RC2888/01
Guest-Mode
Remote
1 LO6HU1 1.1 2 HRM SW H3.03C 3 CODE 0 0 0 0 0 4 OP 34 4 161 9 60 117 0 5 AUTO AUTO STEREO 6 7 8 CO 35 CL 31 BR 33 SH 31 9 VL 6 BL 0 10 BS 31 TR 31 11 COMMERCIAL SMARTPORT OFF 12 CHANNEL CVI
1 2
3
Loading...
+ 17 hidden pages