Philips 24PHH5210, 24PHT5210 User Manual

www.philips.com/welcome

5210 series

User Manual

24PHH5210

24PHT5210 24PHT5210

1 Your new TV 3

1.1 Pause TV and recordings 3

1.2 EasyLink 3

2 Setting up 4

2.1 Read safety 4

2.2 TV stand and wall mounting 4

2.3 Tips on placement 4

2.4 Power cable 4

2.5 Antenna cable 5

3 Connections 6

3.1 Tips on connections 6

3.2 EasyLink HDMI CEC 7

3.3 Common interface - CAM 8

3.4 Set-top box - STB 8

3.5 Home Theatre System - HTS 9

3.6 Blu-ray Disc player 10

3.7 DVD player 10

3.8 Game console 10

3.9 USB Hard Drive 11

3.10 USB flash drive 11

3.11 Camcorder 12

3.12 Computer 12

3.13 Headphones (For 5210 TV models) 12

4 Switch on 13

4.1 On or Standby (For 4000, 5210 TV models) 13

5 Remote control 14

5.1 Key overview (For 4000, 4100, 4200, 5210 TV models) 14

5.2 IR sensor 14

5.3 Batteries 15

5.4 Cleaning 15

6 TV channels 16

6.1 Watching TV channels 16

6.2 Channel installation 20

7 TV guide 23

7.1 Using the TV guide 23

7.2 Recordings 23

7.3 Receiving TV guide data 23

8 Sources 25

8.1 Sources list 25

8.2 From standby 25

8.3 EasyLink 25

9 Timers and clock 26

9.1 Sleep timer 26

9.2 Clock 26

9.3 Auto switch off 26

10 Your photos, videos and music 27

10.1 From a USB connection 27

11 Pause TV 29

11.1 Pause TV 29

12 Recording 30

12.1 What you need 30

12.2 Record a programme 30

12.3 Watch a recording 30

13 Settings 31

13.1 Picture 31

13.2 Game or computer 33

13.3 Format and edges 33

13.4 Sound 33

14 Specifications 36

14.1 Environmental 36

14.2 Reception for PxH / PxT models 36

14.3 Display 37

14.4 Power 37

14.5 Dimensions and weights 37

14.6 Connectivity for Pxx5210 38

14.7 Sound 38

14.8 Multimedia 39

15 Software 40

15.1 Software update 40

15.2 Software version 40

15.3 Open source software 40

15.4 Open source license 40

16 Troubleshooting and support 43

16.1 Troubleshooting 43

16.2 Register 44

16.3 Help 44

16.4 Online help 44

16.5 Consumer Care / Repair 45

17 Safety and care 46

17.1 Safety 46

17.2 Screen care 47

18 Terms of use, copyrights and licenses

18.1 Terms of use 48

18.2 Copyrights and licenses 48

Index 50

Your new TV

1.1

Pause TV and recordings

If you connect a USB Hard Drive, you can pause and record a broadcast from a digital TV channel.

Pause your TV and answer that urgent phone call or simply take a break during a sports match, while the TV stores the broadcast on the USB Hard Drive. You can start watching again later.

1.2

EasyLink

With EasyLink you can operate a connected device, like a Bluray Disc player, with the remote control of the TV.

EasyLink uses HDMI CEC to communicate with the connected devices.

Setting up

2.1

Read safety

M4 (Minimum 10 mm, Maximum 14 mm)

- 32PHT4100/60 - VESA MIS-F 100x100, M4 (Minimum 12 mm, Maximum 16 mm)

- 40Pxx4100 - VESA MIS-F 200x200, M4 (Minimum 12 mm, Maximum 16 mm)

- 48Pxx4100 - VESA MIS-F 200x200, M6 (Minimum 12 mm, Maximum 16 mm)

Read the safety instructions first before you use the TV.

In Help, go to Safety and care > Safety.

2.2

TV stand and wall mounting

TV stand

You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from

www.philips.com.

Use the product type number of the TV to look for the Quick Start Guide to download.

Wall mounting

Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . . To fix the bracket securely, use screws with a length indicated in the drawing.

- 32Pxx4200 - VESA MIS-F 100x100, M4 (Minimum 10 mm, Maximum 14 mm)

- 40Pxx4200 - VESA MIS-F 200x200, M4 (Minimum 12 mm, Maximum 16 mm)

- 40Pxx6300 - VESA MIS-F 200x200, M6 (Minimum 14 mm, Maximum 24 mm)

- 48Pxx6300 - VESA MIS-F 400x400, M6 (Minimum 14 mm, Maximum 24 mm)

- 55Pxx6300 - VESA MIS-F 400x400, M6 (Minimum 14 mm, Maximum 24 mm)

Caution

Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TV's weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.

2.3

Tips on placement

- Position the TV where light does not shine directly on the screen.

- Position the TV up to 15 cm away from the wall.

- The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.

- 22Pxx4000 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm)

- 24Pxx4000 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm)

- 24PHx5210 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm)

- 32PFx4100 - VESA MIS-F 100x100, M4 (Minimum 10 mm, Maximum 14 mm)

- 32PHx4100/12 - VESA MIS-F 100x100, M4 (Minimum 10 mm, Maximum 14 mm)

- 32PHx4100/88 - VESA MIS-F 100x100,

2.4

Power cable

- Insert the power cable into the POWER connector on the back of the TV.

- Make sure the power cable is securely inserted in the connector.

- Make sure that the power plug, in the wall socket, is accessible at all times.

- When you unplug the power cable, always pull the plug, never pull the cable.

Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.

2.5

Antenna cable

Insert the antenna plug firmly into the ANTENNA socket at the back of the TV.

You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.

Use this antenna connection for DVB-T and DVB-C input signals.

Connections

3.1

Tips on connections

EasyLink HDMI CEC

Connectivity guide

Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.

If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use.

Go to www.connectivityguide.philips.com

Antenna

If you have a Set-top box (a digital receiver) or Recorder, connect the antenna cables to run the antenna signal through the Set-top box and/or Recorder first before it enters the TV. In this way, the antenna and the Set-top box can send possible additional channels to the Recorder to record.

If your devices are connected with HDMI and have EasyLink, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched On on the TV and the connected device.

DVI to HDMI

Use a DVI to HDMI adapter if your device only has a DVI connection. Use one of the HDMI connections and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.

Copy protection

DVI and HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management).

HDMI ARC

HDMI 1 connection on the TV have HDMI ARC (Audio Return Channel). If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.

HDMI

HDMI CEC

An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use an HDMI cable for High Definition (HD) or Full HD (FHD) TV signals. For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.

In case you prefer to switch off ARC on the HDMI connections, press and select Setup and press OK. Select TV

settings > Sound > Advanced > HDMI 1 - ARC.

Scart

SCART is a good quality connection. The SCART connection can be used for CVBS and RGB video signals but cannot be used for High Definition (HD) TV signals. The SCART connection combines video and audio signals.

Use the SCART adapter cable to connect your device.

EasyLink setup

The TV comes with EasyLink switched on. Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands.

HDMI CEC on other brands

The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink.

Audio Out - Optical

Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In Optical connection on the HTS. The Audio Out Optical connection sends the sound from the TV to the HTS.

You can set the type of the audio out signal to fit the audio capabilities of your Home Theatre System.

Example HDMI CEC branding names are property of their respective owners.

Operate devices (For 4000, 4100, 4200, 5210 TV models)

To operate a device connected to HDMI and set up with EasyLink, select the device - or its activity - in the list of TV connections. Press  SOURCES , select a device connected to an HDMI connection and press OK.

If the sound does not match the video on screen, you can adjust the audio to video synchronization.

3.2

EasyLink HDMI CEC

EasyLink

With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection.

Once the device is selected, the TV remote control can control the device. However and  OPTIONS keys and some other TV keys are not forwarded to the device. If the key you need is not on the TV remote control, you can select the key in the Options menu. Press  OPTIONS and select Controls in the menu bar. On the screen, select the device key you need and press OK. Some very specific device keys might not be available in the Controls menu.

Note: Only devices that support EasyLink Remote Control function will respond to the TV remote control.

EasyLink settings

The TV comes with all EasyLink settings switched on. You can switch off any EasyLink setting independently.

EasyLink

Contact a digital TV broadcaster for more information on terms and conditions.

To switch off EasyLink completely . . .

1. Press and select Setup and press OK.

2. Select TV settings > General settings > EasyLink.

3. Select EasyLink.

4. Select Off and press OK.

5. Press , repeatedly if necessary, to close the menu.

EasyLink Remote Control

If you want devices to communicate but you don't want to operate them with the TV remote control, you can switch off EasyLink remote control separately. You can control multiple HDMI-CEC compliant devices with your TV remote control.

In the EasyLink settings menu, select EasyLink

Remote Control and select Off. One-touch play

When you play an HDMI-CEC compliant device, the TV switches on from standby and switches to the correct source.

One-touch standby

When you press  on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode.

System audio control

If you connect an HDMI-CEC compliant device that includes speakers through the HDMI ARC connector, you can choose to hear the TV audio from those speakers instead of the TV speakers.

CAM

Insert a CAM module

Switch off the TV before inserting a CAM. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV.

Use the Common Interface slot on the TV to insert the CAM card. With the front of the card facing to you, gently insert the CAM as far as it will go. Leave the card in the slot permanently.

It may take a few minutes before the CAM is activated. Removing the CAM will deactivate the broadcast service on TV. If a CAM is inserted and subscription fees are paid, (connection methods can differ), you can watch the TV broadcast. The inserted CAM is exclusively for your TV.

3.4

Set-top box - STB

Use 2 antenna cables to connect the antenna to the Set-top box (a digital receiver) and the TV.

3.3

Common interface - CAM

CI+

This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes,

like movies and sports, offered by digital TV broadcasters in your region. These programmes are scrambled by the TV broadcaster and descrambled with a prepaid CI+ module. Digital TV broadcasters provide this CI+ module (Conditional Access Module - CAM) when you subscribe to their premium programmes. These programmes have a high level of copy protection.

Next to the antenna connections, add an HDMI cable to connect the Set-top box to the TV. Alternatively, you can use a SCART cable if the Settop box has no HDMI connection.

Auto switch off

Switch off this automatic timer, if you only use the remote control of the Set-top box. Do this to prevent the TV from switching off automatically after a 4 hour period without a key press on the remote control of the TV.

To switch off the Switch off timer, press and select Setup and press OK. Select TV settings > General settings > Auto switch

off and set the slider bar to Off.

Audio to video synchronisation (sync)

If the sound does not match the video on screen, you can set a delay on most Home Theatre Systems with a disc player to match the sound with the video.

Audio Out settings

Audio Out delay

3.5

Home Theatre System - HTS

Connect HTS

Use an HDMI cable to connect a Home Theatre System (HTS) to the TV. You can connect a Philips Soundbar or an HTS with a built-in disc player. Alternatively, you can use a SCART cable if the device has no HDMI connection.

HDMI ARC

If your Home Theatre System has an HDMI ARC connection, you can use any HDMI connection on the TV to connect. With HDMI ARC, you do not need to connect the extra audio cable. The HDMI ARC connection combines both signals. All HDMI connections on the TV can offer the Audio Return Channel (ARC) signal. But once you connected the Home Theatre System, the TV can only send the ARC signal to this HDMI connection.

With a Home Theatre System (HTS) connected to the TV, the picture on TV and the sound from the HTS should be synchronised.

Automatic audio to video sync

With recent Philips Home Theatre Systems, the audio to video sync is automatically synchronised and always correct.

Audio sync delay

For some Home Theatre Systems you might need to adjust the audio sync delay to synchronise the audio to video. On the HTS, increase the delay value until there is a match between picture and sound. A delay value of 180ms may be required. Read the user manual of the HTS. With a delay value set up on the HTS, you need to switch off Audio Out delay on the TV.

To switch off the Audio Out delay . . .

1. Press and select Setup and press OK.

2. Select TV settings > Sound > Advanced > Audio out delay.

3. Select Off and press OK.

4. Press , repeatedly if necessary, to close the menu.

If the Home Theatre System has no HDMI ARC connection, add an optical audio cable (Toslink) to send the sound of the TV picture to the Home Theatre System.

Audio Out offset

If you cannot set a delay on the Home Theatre System, you can set the TV to sync the sound. You can set an offset that compensates the time necessary for the Home Theatre System to process the sound of the TV picture. You can set the value in steps of 1ms. Maximum setting is 12ms. The Audio out delay setting should be switched on.

To synchronise the sound on the TV . . .

1. Press and select Setup and press OK.

2. Select TV settings > Sound > Advanced > Audio out offset.

3. Use the slider bar to set the sound offset and press OK.

4. Press , repeatedly if necessary, to close the menu.

Audio Out format

If you have a Home Theatre System (HTS) with multichannel sound processing capabilities like Dolby Digital, DTS® or similar, set the Audio out format to Multichannel. With Multichannel, the TV can send the compressed multichannel sound signal from a TV channel or connected player to the Home Theatre System. If you have a Home Theatre System without multichannel sound processing, select Stereo.

To set the Audio Out format . . .

1. Press and select Setup and press OK.

2. Select TV settings > Sound > Advanced > Audio out format.

3. Select Multichannel or Stereo.

4. Press , repeatedly if necessary, to close the menu.

Audio Out levelling

- Check if the HDMI ARC setting on the TV is switched On. Go to > Setup > TV settings > Sound > Advanced > HDMI 1 -ARC.

3.6

Blu-ray Disc player

Use a High speed HDMI cable to connect the Blu-ray Disc player to the TV.

Use the Audio Out leveling setting to level the volume (loudness) of the TV and the Home Theatre System when you switch over from one to another. Volume differences can be caused by differences in sound processing.

To level the difference in volume . . .

1. Press and select Setup and press OK.

2. Select TV

settings > Sound > Advanced > Audio out leveling.

3. If the volume difference is large, select More. If the volume difference is small, select Less. Press , repeatedly if necessary, to close the menu.

Audio Out leveling affects both the Audio Out Optical and HDMI ARC sound signals.

Problems with HTS sound

Sound with loud noise

If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theatre System might be distorted.

If the Blu-ray Disc player has EasyLink HDMI CEC, you can operate the player with the TV remote control.

3.7

DVD player

Use an HDMI cable to connect the DVD player to the TV. Alternatively, you can use a SCART cable, if the device has no HDMI connection.

1. Press and select Setup and press OK.

2. Select TV

settings > Sound > Advanced > Audio out format. No sound

If you cannot hear the sound from the TV on your Home Theatre System, check the following . . .

- Check if you connected the HDMI cable to a HDMI ARC connection on the Home Theatre System. All HDMI connections on the TV are HDMI ARC connections.

If the DVD player is connected with HDMI and has EasyLink CEC, you can operate the player with the TV remote control.

3.8

Game console

HDMI

For best quality, connect the game console with an High speed HDMI cable to the TV

3.9

USB Hard Drive

What you need

If you connect a USB Hard Drive, you can pause or record a TV broadcast. The TV broadcast must be a digital broadcast (DVB broadcast or similar).

To pause

To pause a broadcast, you need a USB 2.0 compatible Hard Drive with a minimum of 32GB disc space.

Installation

Before you can pause or record a broadcast, you must connect and format a USB Hard Drive.

1. Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.

2. Switch on the USB Hard Drive and the TV.

3. When the TV is tuned to a digital TV channel, press (Pause). Trying to pause will start the formatting.



Follow the instructions on screen. When the USB Hard Drive is formatted, leave it

connected permanently.

Warning

The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.

To record

To pause and record a broadcast, you need a minimum of 250GB disc space.

TV guide

Before you decide to buy a USB Hard Drive to record, you can check if you can record digital TV channels in your country. Press  TV GUIDE on the remote control. If there is a Record button on the TV guide page, you can record.

3.10

USB flash drive

You can view photos or play your music and videos from a connected USB flash drive.

Insert a USB flash drive in one of the USB connections on the TV while the TV is switched on.

The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press  SOURCE , select USB and press OK.

To stop watching the USB flash drive content, press

EXIT or select another activity.



To disconnect the USB flash drive, you can pull out the flash drive anytime.

ideal TV watching or gaming setting. To set the TV to the ideal setting manually . . .

1. Press and select Setup and press OK.

3.11

Camcorder

HDMI

For best quality, use an HDMI cable to connect the camcorder to the TV.

2. Select TV settings > Picture > Advanced >

Game or compter and press OK.

3. Select Game (for gaming) or

select Computer (for watching a movie) and press OK.

4. Press , repeatedly if necessary, to close the

menu. Remember to set the Game or computer setting back

to Computer when you stop playing the game.

3.13

Headphones (For 5210 TV models)

You can connect a set of headphones

3.12

Computer

Connect

You can connect your computer to the TV and use the TV as a PC monitor.

With HDMI

Use an HDMI cable to connect the computer to the TV.

With DVI to HDMI

Alternatively, you can use a DVI to HDMI adapter to connect the PC to HDMI and an audio L/R cable (minijack 3.5mm) to AUDIO IN L/R on the back of the TV.

Settings

to  connection on the TV. The connection is a mini-jack

3.5mm. You can adjust the

volume of the headphones separately.

To adjust the volume . . .

1. Press and select Setup and press OK.

2. Select TV settings > Sound > Headphone

volume and press OK.

3. Press  (up) or  (down) to adjust the volume.

4. Press , repeatedly if necessay, to close the

menu.

Ideal monitor setting

If your computer is added as a Computer type of device in the Source menu (the list of connections), the TV is set to the ideal Computer setting automatically.

If you use your computer to watch movies or use it to play games, you might want to set the TV back to the

Switch on

4.1

On or Standby (For 4000, 5210 TV models)

Make sure you plugged in the mains power on the back of the TV before you switch on the TV.

If the red indicator light is off, press the power button on the side of the TV to put the TV in standby - the red indicator will light up.

With the TV in standby, press  on the remote control to switch the TV On.

Switch to standby

To switch the TV to standby, press  on the remote control.

Switch Off

To switch the TV Off, press the power button on the side of the TV. The red indicator light is off. The TV is still connected to the mains power but consumes a minimum of energy. To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.

Remote control

5.1

Key overview (For 4000, 4100, 4200, 5210 TV models)

To open or close programme infomation.

4.  BACK

To switch back to the previous channel you selected. To close a menu without changing a setting.

5. HOME

To open or close the home menu.

6.  EXIT

To switch back to watching TV.

Top

Standby / On

1. 

To switch the TV On or back to Standby.

2. Playback keys

- Play , to playback

- Pause , to pause playback

- Stop , to stop playback

- Rewind , to rewind

- Fast forward , to go fast forward

- Record , to record now

3.  TV GUIDE To open or close the TV guide.

4.  SETUP To open the Settings menu.

5.  FORMAT To open or close the Picture format menu.

7.  OPTIONS

To open or close the Options menu.

8. OK key

To confirm a selection or setting.

9. Arrow / navigation keys

To navigate up, down, left or right.

10.  LIST

To open or close the channel list.

Bottom

1.  Volume

To adjust the volume level.

2. Number keys and text keypad

To select a TV channel directly or to enter text.

Middle

1.  SOURCES To open or close the Sources menu - the list of connected devices.

2. Colour keys The buttons function follow the on-screen instructions.

3.  INFO

3. SUBTITLE

To switch subtitles on, off or Automatic.

4.  Mute

To mute the sound or to restore it.

5.  Channel

To switch to the next or previous channel in the channel list, to open the next or previous page in Text or start the next or previous chapter on a disc.

6. TEXT

To open or close Text / Teletext.

5.2

IR sensor

The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.

5.3

Batteries

1. Slide the battery door in the direction shown by the arrow.

2. Replace the old batteries with 2 type AAA-LR03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly.

3. Reposition the battery door.

4. Slide it back until it clicks.

Remove the batteries if you are not using the remote control for a long time. Safely dispose of your old batteries according to the end of use directions.

5.4

Cleaning

Your remote control is treated with a scratch-resistant coating.

To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.

TV channels

are installed during installation. Switch to a radio channel just like you switch to a TV channel.

6.1

Watching TV channels

Switch channels (For 4000, 4100, 4200, 5210 TV models)

To watch TV channels, press . The TV tunes to the TV channel you last watched.

Alternatively, press to open the Home menu and select TV and press OK.

To switch channels, press   or  . If you know the channel number, type in the number with the number keys.

Press OK after you entered the number to switch

channel.

To switch back to the previously tuned channel, press



To switch to a channel from a channel list

While watching a TV channel, press  LIST to open the channel lists.

Channel list

View all channel list

1. While watching a TV channel, press

open the channel list.

2. Press  OPTIONS to open Option menu.

3. Select List, then you can select All, Favourites,

Radio, and New channels.

Favourite channels

You can create a favourite channel list that only holds the channels you want to watch. With the Favourite channel list selected, you will only see your favourite channels when you switch through channels.

Create your favourite channel list

1. While watching a TV channel, press  LIST to open

the channel list.

2. Select the channel to mark as favourite and

press  OPTIONS .

3. Select Add favourites and press OK. The selected

channel is marked with a .

4. To finish, press . The channels are added to the

Favourites list.

5. To remove a channel from the favourites list, select

the channel with a , then press  OPTIONS , select Remove favourites and press OK.

Reorder

You can reorder — reposition — channels in the Favourite channel list.

1. In the channel list Favourites, highlight the channel

you want to reposition.

2. Press  OPTIONS.

3. Select Reorder and press OK.

4. Select the channel to reorder and press OK.

5. Press the Navigation buttons to move the

highlighted channel to another location and press OK.

6. Once complete, press  OPTIONS.

7. Select Exit reorder and press OK.



LIST to

The channel list can have several pages with channels. To view the next or previous page, press

+ or  .



To close the channel lists without switching channel, press  LIST again.

Radio channels

If digital broadcasting is available, digital radio station

You can highlight another channel and do the same.

Add or remove favourites in other channel lists

You can mark channels and radio stations as favourites from the All, Radio and New channel list. In these lists, highlight a channel you want to add to the favourite list and press favourites and press OK. The selected channel is marked with a . To remove a channel from the favourites list, select Remove favourites and press OK.

OPTIONS. Select Add



+ 35 hidden pages

Philips 24PHH5210, 24PHT5210 User Manual

Contents