Philips 24PFT5303, 24PFS5303, 22PFT5303, 22PFS5303 User Manual

Register your product and get support at
www.philips.com/welcome
5303 series
User Manual
22PFS5303 22PFT5303 24PFS5303 24PFT5303
1 Get Support 3
1.1 Identify and Register your TV 3
1.2 TV Help and User Manual 3
1.3 On-line Help and User Manual 3
1.4 Consumer Care / Repair 3
2 Software 4
2.1 Update Software 4
2.2 Software Version 4
3 Quick Guide 5
3.1 Remote Control 5
3.2 IR sensor 6
3.3 Joysticker - Local Control (if available) 6
4 Setting Up 8
4.1 Read Safety 8
4.2 TV Placement 8
4.3 Turn on TV 10
5 Connections 12
5.1 Connectivity guide 12
5.2 Antenna 12
5.3 Satellite (if available) 12
5.4 Video Device 13
5.5 Audio Device 15
5.6 Computer 16
5.7 CAM with Smart Card - CI+ 17
5.8 USB Device 17
5.9 Wired Network - Freeview (Network port is only for UK models) 18
6 Switch Source 20
6.1 Source List 20
6.2 Rename Device 20
7 Channels 21
7.1 About Channels and Switch Channels 21
7.2 Install Channel 21
7.3 Channel List 26
7.4 Select Channel Filter 27
7.5 Favourite Channels 27
8 TV Guide 29
8.1 What You Need 29
8.2 Using the TV Guide 29
9 Recording and Pause TV 31
9.1 What You Need 31
9.2 Recording 31
9.3 Pause TV 32
10 Videos, Photos and Music 33
10.1 From a USB Connection 33
10.2 Photos 33
10.3 Videos 33
10.4 Music 34
11 Open TV Setting Menus 35
11.1 Home Menu Overview 35
11.2 Utilities Menu 35
11.3 Quick Settings and All Settings 35
11.4 All Settings 35
12 Environmental 43
12.1 European Energy Label 43
12.2 End of Use 43
13 Specifications 44
13.1 Power (4503, 5303, 5503, 5603, 5703 Series)
44
13.2 Power (5403 Series) 44
13.3 Reception 44
13.4 Display Resolution 44
13.5 Display Input Resolution 45
13.6 Sound 45
13.7 Multimedia 45
13.8 Connectivity 45
14 Troubleshooting 47
14.1 Tips 47
14.2 Switch On 47
14.3 Remote Control 47
14.4 Channels 47
14.5 Picture 48
14.6 Sound 48
14.7 HDMI 48
14.8 USB 49
15 Safety and Care 50
15.1 Safety 50
15.2 Screen Care 51
15.3 Terms of Use 51
16 Copyrights 53
16.1 HDMI 53
16.2 Dolby Audio 53
16.3 DTS 2.0 + Digital Out ™ 53
16.4 Other Trademarks 53
17 Open Source 54
17.1 Open Source Software 54
17.2 Open Source License 54
Index 57
2
1
Get Support
1.1
Identify and Register your TV
Identify your TV - TV model number and serial number
You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
Register your TV
Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases.
telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer.
For more TV troubleshooting and frequently asked questions (FAQs)...
Go to http://philips-tvconsumercare.kxondemand.com/
portal/en/ModelSelect
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more easily, you can download the TV Help in PDF format to read on your smartphone, tablet or computer. Alternatively, you can print the relevant Help page from your computer. To download the Help (user manual) go to www.philips.com/support
Go to www.philips.com/welcome
1.2
TV Help and User Manual
Press  Settings > Help In Help menu, you can easily get software updated,
reset TV to default settings, and read user manual.
- Update software: Check available software updates.
- User manual: Read the user manual for TV information.
- Troubleshooting: Find a solution for frequent ask questions.
- Factory settings: Reset all settings to factory settings.
- Reinstall TV: Reinstall and redo the complete TV installation.
- Contact info: Show the telephone number or web address for your country or region.
1.4
Consumer Care / Repair
For support and repair, call the Consumer Care hotline in your country. Our service engineers will take care of a repair, if necessary.
Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/support and select your country if needed.
TV model number and serial number
You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.
Warning
Do not attemp to repair the TV yourself. This may cause severe injury, irrepairable damage to your TV or void your warranty.
1.3
On-line Help and User Manual
To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number.
Go to www.philips.com/support. On the support site you can find your country's
3
2
Look for OAD updates (Over-the-air
Software
2.1
Update Software
Search for Updates
(Home) > Settings > Update
software > Search for updates. You need a computer and a USB memory device to
upload the software on the TV. Use a USB memory device with 256MB free space. Make sure that write protection is switched off.
1. Start the update on TV
-  (Home) > Settings > Update software > Search for updates.
2. Identify the TV
- Insert the USB memory into one of the USB connections of the TV. Select Start and press OK. An identification file is written on the USB memory device.
Download)
Scan to search for an Over-the-air software update.
(Home) > Settings > Update software > Look
for OAD updates. * The availability of OAD updates is dependent on
your country.
2.2
Software Version
To view the current TV software version…
(Home) > Settings > Update
software > Current software Info
3. Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the file update.htm and double click it.
- Click on Send ID.
- Select your region
- If new software is available, download the .zip file. After the download, unzip the file and copy the
file autorun.upg onto the USB memory device. Do not place this file in a folder.
4. Update the TV software
- Insert the USB memory into the TV again. The update starts automatically. The TV switches itself off for 10 seconds and then back on again. Please wait.
Do not . . .
- use the remote control
- remove the USB memory device from the TV If a power cut occurs during the update, never
remove the USB memory device from the TV. When the power returns, the update will continue.
Local Updates
For dealers and expert users…
(Home) > Settings > Update software > Local
updates.
4
3
Quick Guide
3.1
Remote Control
Batteries and Cleaning
Replace batteries
If the TV does not react on a key press on the remote control, the batteries might be empty.
To replace the batteries, open the battery compartment on the back of the remote control.
1. Slide the battery door in the direction shown by the arrow.
2. Replace the old batteries with 2 type AAA-R03-1.5V batteries. Make sure the + and the - ends of the batteries line up correctly.
3. Reposition the battery door and slide it back until it clicks.
1.  Standby / On
To switch the TV on or back to Standby.
2. Playback keys
- Play , to playback
- Pause , to pause playback
- Stop , to stop playback
- Rewind , to rewind
- Fast forward , to go fast forward
- Record , to record now
3.  TV GUIDE To open or close the TV Guide.
4.  FORMAT To open or close the Picture format menu.
5.  SETUP To open the Settings menu.
Middle
- Remove the batteries if you are not using the remote control for a long time.
- Safely dispose of your old batteries according to the end of use directions.
Cleaning
Your remote control is treated with a scratch-resistant coating.
To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.
Key Overview
Top
1.  HOME
To open or close the home menu.
2.  SOURCES To open or close the Sources menu - the list of connected devices.
3. Colour keys The buttons function follow the on-screen instructions.
4.  INFO To open or close programme infomation.
5
5.  BACK To switch back to the previous channel you selected. To close a menu without changing a setting.
3.2
IR sensor
6.  EXIT
To switch back to watching TV.
7.  OPTIONS To open or close the Options menu.
8. OK key To confirm a selection or setting.
9. Arrow / navigation keys To navigate up, down, left or right.
10.  LIST To open or close the channel list.
Bottom
The TV can receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.
Warning
Do not put any objects in front of IR sensor of the TV, it may block the IR signal.
3.3
Joysticker - Local Control (if
1.  Mute
To mute the sound or to restore it.
2.  Volume To adjust the volume level.
3. Number keys To select a TV channel directly.
4. SUBTITLE To switch subtitles on, off or Automatic.
5.  Channel To switch to the next or previous channel in the channel list. To open the next or previous page in Text/Teletext. To start the next or previous chapter on a disc.
available)
Keys on TV
If you lost the remote control or its batteries are empty, you can still do some basic TV operations.
To open the basic menu…
1. With the TV switched on, press the joystick key on the back of the TV to bring up the basic menu.
2. Press left or right to select  Volume,  Channel or  Sources.
6. TEXT To open or close Text / Teletext.
Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go
6
through the list of sources, including the tuner selection.
The menu will disappear automatically.
7
4
Wall Mounting
Setting Up
4.1
Read Safety
Read the safety instructions first before you use the TV.
To read the instructions, in User manual, see chapter Safety and Care.
4.2
TV Placement
Tips on Placement
- Position the TV where light does not shine directly on the screen.
- Position the TV up to 15 cm away from the wall.
- The ideal distance to watch TV is 3 times its diagonal screen size. When seated, your eyes should be level with the centre of the screen.
4503 series TV
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
- 32PHx4503 - VESA MIS-F 100x100, M4 (Minimum 10 mm, Maximum 14 mm)
Preparation
First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.
TV Stand
You can find the instructions for mounting the TV stand in the Quick Start Guide that came with the TV. In case you lost this guide, you can download it from www.philips.com.
Use the model number of the TV to look for the Quick Start Guide to download.
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
5303 series TV
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
- 22PFx5303 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm)
- 24PFx5303 - VESA MIS-F 75x75, M4 (Minimum 10
8
mm, Maximum 10.5 mm)
Preparation
First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
5403 series TV
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
5503 series TV
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
- 43PFx5503 - VESA MIS-F 200x100, M6 (Minimum 10 mm, Maximum 15 mm)
- 50PFx5503 - VESA MIS-F 200x200, M6 (Minimum 10 mm, Maximum 15 mm)
Preparation
First remove the 2 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.
- 22PFx5403 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm)
Preparation
First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
5703 series TV
Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . .
- 24PFx5703 - VESA MIS-F 75x75, M4 (Minimum 10 mm, Maximum 10.5 mm)
Preparation
9
First remove the 4 plastic screw caps out of the threaded bushes on the back of the TV. Make sure that the metal screws, to mount the TV to the VESA-compliant bracket, go about 10mm deep inside the threaded bushes of the TV.
Caution
Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury.
4.3
Turn on TV
Connect Power Cable (4503, 5303, 5503, 5603, 5703 series)
- Insert the power cable into the POWER connector on the back of the TV.
- Make sure the power cable is securely inserted in the connector.
- Make sure that the power plug, in the wall socket, is accessible at all times.
- When you unplug the power cable, always pull the plug, never pull the cable.
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.
Connect Power Cable (5403 series)
- Insert the power cable into the POWER connector on the back of the TV.
- Make sure the power cable is securely inserted in the connector.
- Make sure that the power plug, in the wall socket, is accessible at all times.
- When you unplug the power cable, always pull the plug, never pull the cable.
For 32" or above
For 22"/24"
Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time.
Switch On or Standby
Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
Switch On
Press the power button on the side or the back of the TV.
Switch to standby
10
To switch the TV to Standby, press  on the remote control.
To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times.
11
5
Connections
5.1
Connectivity guide
Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound.
When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu.
If you need help to connect several devices to the TV, you can visit the Philips TV connectivity guide. The guide offers information on how to connect and which cables to use.
Go to www.connectivityguide.philips.com
For 22"/24"
* Network port is only for UK models ** Satellite port is only for xxPxSxxx3 series
5.2
Antenna
Insert the antenna plug firmly into the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna signal from an antenna distribution system. Use an IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C input signals.
For 32" or above
5.3
Satellite (if available)
Attach the satellite F-type connector to the satellite connection SAT at the back of the TV.
For 32" or above
12
For 22"/24"
* Network port is only for xxPxTxxx3/05 series
* Network port is only for UK models ** Satellite port is only for xxPxSxxx3 series
5.4
Video Device
HDMI
For best signal quality transfer, use a High speed HDMI cable and do not use an HDMI cable longer than 5 m.
For 32" or above
** Satellite port is only for xxPxSxxx3 series
Copy protection
HDMI cables support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu­ray Disc. Also referred to as DRM (Digital Rights Management).
HDMI - DVI
If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter.
Use a DVI to HDMI adapter if your device only has a DVI connection. Use HDMI 2 connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.
For 32" or above
For 22"/24"
13
For 22"/24"
Switch on EasyLink
(Home) > Settings > General
settings > EasyLink > EasyLink > On
Operate HDMI CEC-compatible devices with TV remote control
(Home) > Settings > General
settings > EasyLink > EasyLink remote control > On
Note:
- EasyLink might not work with devices from other brands.
- The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink. Example HDMI CEC branding names are property of their respective owners.
* Network port is only for xxPxTxxx3/05 series ** Satellite port is only for xxPxSxxx3 series
HDMI-CEC Connection - EasyLink
Connect HDMI CEC-compatible devices to your TV, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched on on the TV and the connected device.
SCART
SCART is a good quality connection. The SCART connection can be used for CVBS and
RGB video signals but cannot be used for High Definition (HD) TV signals. The SCART connection combines video and audio signals. The SCART connection also supports NTSC playback.
14
5.5
Audio Device
HDMI ARC
Only HDMI 1 on the TV have HDMI ARC (Audio Return Channel).
If the device, typically a Home Theatre System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 connection on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals.
Digital Audio Out - Optical
For 22"/24"
* Network port is only for UK models ** Satellite port is only for xxPxSxxx3 series
Audio Out - Optical is a high quality sound connection.
This optical connection can carry 5.1 audio channels. If your device, typically a Home Theatre System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS.
For 32" or above
Headphones
You can connect a set of headphones to the  connection on the side of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately.
15
5.6
Computer
HDMI - DVI
If you still own a device that only has a DVI connection, you can connect the device to HDMI 2 connection with a DVI to HDMI adapter.
Use a DVI to HDMI adapter if your device only has a DVI connection. Use HDMI 2 connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.
For 32" or above
* Network port is only for UK models ** Satellite port is only for xxPxSxxx3 series
VGA (if available)
Use a VGA cable if your device only has a VGA connection. Use VGA connection and add an Audio L/R cable (mini-jack 3.5mm) to Audio In for sound, on the back of the TV.
For 22"/24"
For 22"/24"
* Network port is only for UK models ** Satellite port is only for xxPxSxxx3 series
16
Ideal Settings
(Home) > Settings > Picture >
Advanced > Computer
Set to On to have the ideal picture setting for use your TV as a computer monitor.
* Only available for HDMI and VGA sources.
5.7
CAM with Smart Card - CI+
About CI+
This TV is ready for the CI+ Conditional Access. With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV operators in your region. These programmes are scrambled by the TV operator and descrambled with a prepaid CI+ module. Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. These programmes have a high level of copy protection.
Contact a digital TV operator for more information on terms & conditions.
slot permanently. When you switch on the TV, it may take a few minutes
before the CAM is activated. If a CAM is inserted and subscription fees are paid (subscription methods can differ), you can watch the scrambled channels supported by the CAM smart card.
The CAM and smart card are exclusively for your TV. If you remove the CAM, you will no longer be able to watch the scrambled channels supported by the CAM.
Watch Channel on Smart Card
You can watch channels which are installed from CI/CAM cards.
1. While watching a TV channel, press open the channel list.
2. Select: CI+ Channel list .
LIST to
Smart Card
Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes.
Insert the smart card into the CAM module. See the instruction you received from the operator.
To insert the CAM in the TV…
1. Look on the CAM for the correct method of insertion. Incorrect insertion can damage the CAM and TV.
2. While looking at the back of the TV, with the front of the CAM facing towards you, gently insert the CAM into the slot COMMON INTERFACE.
3. Push the CAM in as far as it will go. Leave it in the
Set Passwords and PIN Codes
For some CAMs, you must enter a PIN code to watch its channels. When you set the PIN code for the CAM, we recommend you to use the same code you are using to unlock the TV.
To set the PIN code for the CAM…
(Home) > Settings > Child lock > CAM PIN
5.8
USB Device
USB Flash Drive
You can view photos or play your music and videos from a connected USB flash drive. Insert a USB flash drive in the USB connection on the TV while the TV is switched on.
The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press  SOURCES and select USB.
17
Warning
The USB Hard Drive is formatted exclusively for this TV, you cannot use the stored recordings on another TV or PC. Do not copy or change recording files on the USB Hard Drive with any PC application. This will corrupt your recordings. When you format another USB Hard Drive, the content on the former will be lost. A USB Hard Drive installed on your TV will need reformatting for use with a computer.
USB Hard Drive
If you connect a USB Hard Drive, you can pause or record digital TV broadcasts (DVB broadcasts or similar).
Minimum Disk Space
- To pause a broadcast, you need a USB compatible Hard Drive with a minimum of 4GB disk space.
- To pause and record a broadcast, you need a minimum of 32GB disk space.
Before you can pause or record a broadcast, you must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard Drive.
To Pause
To pause a broadcast, you need a USB compatible Hard Drive with a minimum of 4GB disk space.
To Record
To pause and record a broadcast, you need a minimum of 32GB disk space.
1. Connect the USB Hard Drive to one of the USB connections on the TV. Do not connect another USB device to the other USB ports when formatting.
5.9
Wired Network - Freeview (Network port is only for UK models)
Network
About Network
Network port and function is for Freeview HD streaming features only.
Connect to Network
To connect the TV to the Internet, you need a network router with a connection to the Internet.
Use a high-speed (broadband) connection to the Internet.
2. Switch on the USB Hard Drive and the TV.
3. When the TV is tuned to a digital TV channel, press  (Pause). Trying to pause will start the formatting.
Follow the instructions on screen. When the USB Hard Drive is formatted, leave it
connected permanently.
Make the connection
To make a wired connection…
1. Connect the router to the TV with a network cable (Ethernet cable**).
2. Make sure that the router is switched on.
3. Press  (Home) , select Settings > Network and press  (right) to enter the menu.
18
Loading...
+ 41 hidden pages