Philips 20PV184/05 Operating Instructions Manual
&
The remote control
STANDBY m
Standby
CLEAR
Reset/clear
0-9
Digit buttons 0-9
SV/V+
’VIDEOPlus+’ programming
TIMER k
TIMER programming on the set
MENU
Call menu
OK
Confirm button
D/C/A/B
Menu left/right/Up/Down
Sp
Volume control
P p
Programme number Plus/Minus
MUTE y
Mute sound
GPLAY
Playback
H
Rewind/Reverse scanning
STOP h
Pause/Stop
I
Forward wind/ Forward scanning
INDEX E
Index search
RECORD n
Record
STILL R
Still picture
TRANSP. -
TELETEXT transparent
TELETEXT e
TELETEXT on/off
CLOCK .
TELETEXT clock time
In TELETEXT you can store the relevant page with the
OK
button.
Selecting TELETEXT functions: when you are in
TELETEXT, press the
MENU
button. Select the
required function with the
D
and theCbuttons.
Confirm with the
OK
button.
Front of the set
m
Standby
P p
Programme number Plus/Minus
Sp
Volume control
5
Record
H
Rewind/Reverse scanning
h
Pause/Stop
G
Playback
I
Forward wind/ Forward scanning
J
Cassette eject
w
Headphones socket
OPERATING INSTRUCTIONS IN BRIEF
&
Programming with ’VIDEOPlus+’
All the information required for programmingis encoded in the ’VIDEOPlus+’ code.
1 Press the
SV/V+
button on the remote control.
2 Enter the entire ’VIDEOPlus+ code’. This code (up to 9 digits) is found next to the start timeof a
TV programme in your TV guide.
If you entered an incorrect code number, clear itwith the
CLEAR
button.
3 If you want to repeat programming at daily or weekly intervals, select the required settings in
the ’DAILY/WEEKLY’ line.
’Daily’ programming can only be usedfor recordings to be made from Mondays to Fridays
inclusive.
4 After confirming the corresponding data appears on the TV screen.
Note: If you use VIDEOPlus+ for the first time, the ’PROGRAMME NR.’ line appears whenyou
enter the VIDEOPlus+ code. Enter the required programmenumber.
5 Confirm with the
OK
button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without eraseprotection.
6 Press the
STANDBY m
button.
How to enter, check or clear a TIMER-block manually
1 Press the
TIMER k
button.
2 Select a free TIMER block or the TIMER block youwant to check or clear.
3 Clear: Press the
CLEAR
button.
4 Enter/Check: Press the
DorC
button to switch between ’DATE’ (date), ’DW’ (daily, weekly),
’PR’ (programme number), ’START’ (start time) and ’END’ (end time).
Press the
A
and the
B
or the
0-9
buttons to change the data.
5 To end programming, press the
MENU
button.
6 Press the
STANDBY m
button.
Selecting a TV channel
Select the required TV channel (= programme number) with the
P p
button or the
0-9
buttons on the remote control.
The selected programme number (e.g.: ’P 01’) appears in the upper right corner of the TV screen.
Volume control
You can control the volume level with the
Sp
button.
If you want to mute the sound temporarily (e.g.:during a telephone call), press the
MUTE y
button on the remote control. When you press it again,the sound returns at the same volume level.
Picture control
You can control brightness, contrast, sharpnessand colour here.
1 Press the
MENU
button.
2 Select and confirm the line ’PICTURE’ .
3 Select and confirm the TV screen setting.
Note: In addition, you can adjust the tint for the playback of cassettes in the NTSC standard.
1
Congratulations on the purchase of one of the most
sophisticated and simple-to-use television/video recorder
combinations (TV Combi) on the market. With this TV Combi
you can record and play VHS-standard cassettes.
Please take the time to read this operating manual before
using your TV Combi.
Safety instructions and other notes
• Danger: high voltage! Do not open the set. The set does not
contain any components that can be repaired by the customer.
When the appliance is connected to the power supply there are
some components that are constantly operational. To switch off
the set completely you must disconnect it from the power supply.
• Note that this power pack is designed for a power supply of
220-240V/50Hz.
• Ensure that air can circulate freely through the ventilation slots
on the set.
• Ensure that no objects or liquids enter the set. If liquid is spilt into
it, disconnect the set immediately from the power supply and call
the After-sales Service for advice.
• The set should not be used immediately after transportation from
a cold to a hot area or vice versa, or in conditions of extreme
humidity.
After unpacking the set, it should be allowed to acclimatize for at
least three hours before installation.
• These operating instructions have been printed on nonpolluting
paper.
• Deposit old batteries at the relevant collection points.
• Please make use of the facilities available in your country for
disposing of the packaging of the set in a way that helps to
protect the environment.
• This electronic equipment contains many materials that can be
recycled. Please inquire about the possibilitiesfor recycling your
old set.
• VIDEOPlus+ and PlusCode are trademarks of Gemstar Development Corpoation. The VIDEOPlus+ system is manufactured under
licence from Gemstar Development Corporation.
Contents Page
1. INSTALLATION 2...................................
Connecting additional equipment 3...................
Emergency interrupt 3...............................
User guide 3.......................................
Making standard settings 3..........................
Setting the clock and date 3..........................
2. PLAYBACK 5.......................................
Continuous playback 5..............................
3. RECORD 6.........................................
Programming with ’VIDEOPlus+’ 7....................
4. SPECIAL FEATURES 8...............................
On Screen Display (OSD) 8...........................
Sleep function (switch off) 8.........................
Switch set on function 9.............................
Child lock 9........................................
Before you call an engineer 10.......................
OPERATING INSTRUCTIONS PHILIPS 20PV184/05
2
Important for the United Kingdom
This apparatus is fitted with an approved moulded 13 Amp
plug. To change a fuse in this type of plug proceed as follows:
1 Remove fuse cover and fuse.
2 Fix new fuse which should be a BS1362 5A, A.S.T.A. or BSI
approved type.
3 Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5A.
Note: * The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A
socket elsewhere.
How to connect a plug:
The wires in the mains lead are coloured in accordance with
the following code:
BLUE - ’NEUTRAL’ (’N’)
BROWN - ’LIVE’ (’L’)
1 The BLUE wire must be connected to the terminal which is
marked with the letter ’N’ or coloured BLACK.
2 The BROWN wire must be connected to the terminal
which is marked with the letter ’L’ or coloured RED.
3 Do not connect either wires to the earth terminal in the
plug which is marked with the letter ’E’ or by the safety
earth symbol
\
or coloured green or green-and-
yellow.
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not simply over
the two wires.
Connecting the cables
1 Insert the aerial plug into the
2
socket.
2 Insert the plug of the mains cable into the wall socket.
3 Switch the set on. The power switch
8
is located on
the left side panel of the set.
Important notes for operation
• We advise you, from now on, to switch the set to standby
using the
STANDBY m
button on the front of the set or on
the remote control.
• When the set is in the standby mode, a small red lamp on
the left of the front of the set will be alight.
• You can switch on with the
STOP h
button, the
0-9
buttons or by inserting a cassette.
• Attention: When you use the power switch
8
on the
side panel, you have completely switched off the set from
the mains power supply. No programmed recordings will
then be made. The red lamp on the left of the front of the
set will not be alight. After a few hours, the date and clock
settings will be lost.
• Attention: Before you switch off the appliance with the
power switch
8
, remove the tape by pressing the
J
button.
• Keep your TV Combi connected to the mains and the
power switch in ’on’ position at all times to ensure that
programmed recordings can be made and that the
television functions normally. The power consumption
required is low.
• Back-up power supply: TV channel storage - typically 1
year, Clock/Timer - typically 30 hours.
1. INSTALLATION
Loading...