Philips 32HFL4351D-10, 26HFL3331D-10, 19HFL3331D-10, 22HFL4371D-10, 26HFL4371D-10 User Manual

Download

22HFL3331D/10

19HFL3331D/10

26HFL3331D/10 22HFL4371D/10 26HFL4371D/10 32HFL4351D/10

EN User Manual

Österreich 0810 000205 €0.07 pro Minute

België/Belgique 078250145 €0.06 Per minuut/Par minute България +3592 489 99 96 Местен разговор

Hrvatska 01 6403 776 Lokalni poziv Česká republika 800142840 Bezplatný hovor

Danmark 3525 8759 Lokalt opkald

Estonia 6008600 local

Suomi 09 2311 3415 paikallispuhelu

France 0821 611655 €0.09 Par minute

Deutschland 01803 386 852 €0.09 pro Minute Ελλάδα 0 0800 3122 1280 Κλήση χωρίς χρέωση

Magyarország 0680018189 Ingyenes hívás

Ireland North 0800 055 6882

South 1800-PHILIPS 7445477

free

Italia 840320086 €0.08 Al minuto Қазақстан +7 727 250 66 17 local

Latvia 52737691 local

Lithuania 67228896 local

Luxemburg/Luxembourg 40 6661 5644 Ortsgespräch/Appel local

Nederland 0900 8407 €0.10 Per minuut

Norge 2270 8111 Lokalsamtale Polska (022) 3491504 połączenie lokalne

Portugal 800 780 903 Chamada local

România 021-203-2060 Apel local Россия Moscow (495) 961-1111

Outside Moscow 8-800-200-0880

Местный звонок

Србија +381 114 440 841 Lokalni poziv

Slovensko 0800 004537 Bezplatný hovor

Slovenija 01 280 95 22 lokalni klic

España 902 888 784 €0.10 Por minuto

Sverige 08 5792 9100 Lokalsamtal

Suisse/Schweiz/Svizzera 0844 800 544 Appel local/Ortsgespräch/Chiamata locale Türkiye 0800 261 3302 Şehiriçi arama

United Kingdom 0845-6010354 local Україна 8-800-500-69-70 Місцевий виклик

www.philips.com/support

Model Serial

This information is correct at the time of press. For updated information, see www.philips.com/support.

English

Contents

1 Notice 2

2 Important 4

3 TV overview 6

Side controls and indicators 6 Guest remote control 6

4 Use your product 8

Switch your TV on/off or to standby 8 Switch channels 8 Watch connected devices 9 Adjust TV volume 9 Use Teletext 9

5 Use more of your product 10

Access TV menus 10 Remove devices from the home menu 10 Change picture and sound settings 10 Use advanced Teletext features 13 Use the Electronic Programme Guide 14 Use Timers 14 Use subtitles 15 Use the TV clock 16 View photos and play music from a USB

storage device 17 Listen to digital radio channels 18 Update the TV software 18 Change TV preferences 19 Access decoder channel 19 Start a TV DEMO 20 Reset the TV to factory settings 20

6 Install channels 21

Automatically install channels 21 Manually install channels 22 Rename channels 23 Reorder channels 23 Test digital reception 23

7 Professional mode instruction 24

Introduction 24 Benets of Professional mode 24 Professional Setup Remote control (2573

optional) 24

Activating the Professional mode setup menu

Professional mode options 26

8 Connect devices 34

Back connector for 22 inch TV 34 Back connector for 26 inch TV and larger 36 Side connector 37 Connect a computer 38 Use a Conditional Access Module 39 Use Philips EasyLink 40 Use a Kensington lock 40

9 Product information 41

Supported display resolutions 41 Multimedia 41 Tuner/Reception/Transmission 41 Remote control 41 Power 41 Supported TV mounts 41

10 Troubleshooting 42

General TV issues 42 TV channel issues 42 Picture issues 42 Sound issues 43 HDMI connection issues 43 Computer connection issues 43 Contact us 43

2 EN

pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

Open source software

This television contains open source software. Philips hereby offers to deliver or make available, upon request, for a charge no more than the cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code on a medium customarily used for software interchange. This offer is valid for a period of 3 years after the date of purchase of this product. To obtain the source code, write to: GBU Customer Care Manager Customer Care department Philips Lighting GBU Hospitality Hurksestraat 2c 5652 AJ Eindhoven The Netherlands

Compliance with EMF

Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no

adverse health effects. Philips conrms

that if its products are handled properly for their intended use, they are safe

to use according to scientic evidence

available today.

1 Notice

Specications are subject to change without

notice. Trademarks are the proper ty of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than

those specied herein, conrmation of their

validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.

Warranty

Risk of injury, damage to T V or void of • warranty! Never attempt to repair the TV yourself. Use the TV and accessories only as • intended by the manufacturer. The caution sign printed on the back of • the TV indicates risk of electric shock. Never remove the TV cover. Always contact Philips Customer Support for service or repairs.

Any operation expressly prohibited in this manual, or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty.

Pixel characteristics

This LCD product has a high number of colour pixels. Although it has effective

English

Note

Only applicable to T Vs suppor ting MPEG4-HD • standard

All other registered and unregistered trademarks are the proper ty of their respective owners.

Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.

Mains fuse (UK only)

This TV is tted with an approved

moulded plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A).

1 Remove fuse cover and fuse. 2 The replacement fuse must comply with

BS 1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type.

3 Ret the fuse cover.

In order to maintain conformity to the EMC directive, the mains plug on this product must not be detached from the mains cord cable.

VESA, FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards Association. ® Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world.

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

4 EN

Two people are required to lif t and •

carry a TV that weighs more than 25 kg.

When stand mounting the T V, use •

only the supplied stand. Secure the stand to the T V tightly. Place the

TV on a at, level sur face that can

support the combined weight of the TV and the stand.

When wall mounting the TV, use only •

a wall mount that can support the weight of the TV. Secure the wall mount to a wall that can support the combined weight of the TV and wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that result in

accident, injury or damage. Risk of injury to children!Follow these • precautions to prevent the TV from toppling over and causing injury to children:

Never place the TV on a surface •

covered by a cloth or other material

that can be pulled away.

Ensure that no part of the TV hangs •

over the edge of the surface.

Never place the TV on tall furniture •

(such as a bookcase) without

anchoring both the furniture and TV

to the wall or a suitable support.

Educate children about the dangers •

of climbing on furniture to reach the

TV. Risk of overheating! Never install the T V •

in a conned space. Always leave a space

of at least 4 inches or 10 cm around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Risk of damage to the TV! Before you • connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different.

2 Important

Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply.

Safety

Risk of electric shock or re!•

Never expose the TV to rain or water. •

Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use.

Never place the TV, remote control •

or batteries near naked ames or

other heat sources, including direct sunlight.

To prevent the spread of re, keep candles or other ames away from

the TV, remote control and batteries at all times.

Never insert objects into the •

ventilation slots or other openings on the TV.

When the TV is swivelled ensure that •

no strain is exerted on the power cord. Strain on the power cord can loosen connections and cause arcing.

Risk of short circuit or re!•

Never expose the remote control or •

batteries to rain, water or excessive heat.

Avoid force coming onto power plugs. •

Loose power plugs can cause arcing

or re.

Risk of injury or damage to the TV!•

English

Disposal of your old product and batteries

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC , which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Risk of injury, re or power cord damage! •

Never place the TV or any objects on the power cord. To easily disconnect the TV power cord • from the power outlet, ensure that you have full access to the power cord at all times. When you disconnect the power cord, • always pull the plug, never the cable. Disconnect the TV from the power outlet • and aerial before lightning storms. During lightning storms, never touch any part of the TV, power cord or aerial cable. Risk of hearing damage! Avoid using • earphones or headphones at high volumes or for prolonged periods of time. If the TV is transported in temperatures • below 5°C, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet.

Screen care

Avoid stationary images as much as • possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage. Unplug the TV before cleaning.• Clean the TV and frame with a soft, • damp cloth. Never use substances such asalcohol, chemicals or household cleaners on the TV. Risk of damage to the TV screen! Never • touch, push, rub or strike the screen with any object. To avoid deformations and colour fading, • wipe off water drops as soon as possible.

6 EN

Guest remote control

a b c d

e f

g h

i j

u t

3 TV overview

This section gives you an overview of commonly used TV controls and functions.

Please read section 3 to 6 to set the basic

consumer menu rst, then follow the

instructions in section 7 to set the Professional mode menu.

Side controls and indicators

a POWER: Switches the product on

or off. The product is not powered off completely unless it is physically unplugged.

b P/CH +/-: Switches to the next or

previous channel.

c SOURCE: Selects connected devices. d VOLUME +/-: Increases or decreases

volume.

English

o ”+/- (Volume +/-)

Increases or decreases volume.

p MENU / EXIT

Toggles the main menu on or off.

q Colour buttons

Selects tasks or options.• When Professional mode is On, press • to operate Multi remote control function. (See page 33 “Multi remote control”).

r Red button(DEMO)

Toggles the demonstration menu on or off. (Only applicable in [Signage] mode, or Professional mode is set to Off ).

s Blue button (Audio Descriptor)

(For RF Digital TV only)

UK only: Enables audio commentary for the visually handicapped.

t TELETEXT

Toggles Teletext on or off.

u b(OPTION)

Accesses options relating to the current activity or selection.

Note

Channel grid is not available in some specic •

modes.

a B (Standby-On)

Switches the TV to standby if the T V • is on. Switches the TV on if the TV is in • standby

b aGUIDE

Switches between channel grid and programme list.

c SUBTITLE

Launches the subtitle menu.

d AV

Selects connected devices.

e ALARM ON

Launches [Alarm time] menu. (Only applicable in [Hospitality] mode and in some models.)

f ALARM OFF

Press to disable the alarm. (Only applicable in [Hospitality] mode and in some models.)

g OK

Conrms an entry or selection. •

Press to display the channel grid, when • watching TV.

h ▲▼◄ ► (Navigation buttons)

Navigates through the menus.

i SLEEP

Displays the sleep timer menu.

j ¬ (MUTE)

Mutes or restores audio output.

k P+/- (Programme +/-)

Switches to the next or previous channel. When the TV menu is on, this functions as Page Up/Down.

l 0-9 (Numeric buttons)

Selects a channel or setting.

m ∏ (Picture format)

Launches the picture format menu.

n MHEG / CANCEL

UK only: Enables audio commentary for the visually handicapped.

8 EN

Note

If you cannot locate your remote control and • want to switch on the TV from standby, press

P/CH +/- or SOURCE at the side of the TV.

Switch channels

Press • P +/- on the remote control or P / CH +/- on the side of the TV.

Enter a channel number using the • Numeric buttons. Use the channel grid.•

Note

When you use a favourite list, you can only • selec t those channels in the list.

4 Use your

product

This section helps you perform basic operations

Switch your TV on/off or to standby

To switch on

If the standby indicator is off, press • POWER at the side of the TV. If the standby indicator is red, press • (Standby-On) on the remote control.

To switch to standby

Press • (Standby-On) on the remote control.

The standby indicator switches to red. »

To switch off

Press • POWER at the side of the TV.

The standby indicator switches off. »

Tip

Though your TV consumes very little power • when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet.

English

To mute or unmute sound

Press • to mute the sound. Press • again to restore the sound.

Use Teletext

1 Press TELETEXT.

The main index page appears. »

2 Select a page as follows:

Press the • Numeric buttons to enter a page number Press • P +/- or to view the nex t or previous page Press the • Colour buttons to select a colour coded item

3 Press TELETEXT to exit Teletext.

Note

For UK users only: Some digital TV channels • offer dedicated digital tex t services (for example, BBC1).v

Watch connected devices

Note

Switch on the device before selecting it as a • source on the T V.

Use the AV button

1 Press AV.

The source list appears. »

2 Press the Navigation buttons to select a

device.

3 Press OK to conrm your choice.

The TV switches to the selected » device.

Adjust TV volume

To increase or decrease volume

Press • +/-. Press • VOLUME +/- on the side of the TV.

10 EN

Remove devices from the home menu

If a device is no longer connected to the TV, remove it from the home menu.

1 Press MENU 2 Press to select a device to remove. 3 Press b (OPTIONS).

The » [Remove device] list appears.

4 Press OK and select [Remove] to remove

the device.

The selected device is removed from » the home menu.

Change picture and sound settings

Change picture and sound settings to suit your

preferences. You can apply pre-dened settings

or change settings manually.

Use Settings assistant

Use the Settings assistant to guide you through the best picture and sound settings.

1 Press MENU. 2 Press to select [Setup] > [Picture]

> [Settings assistant].

3 Press OK.

The » [Settings assistant] menu appears. Follow the on-screen instructions to choose your preferred picture settings.

Use Smart picture

Use Smart picture to apply pre-dened

picture settings.

1 Press MENU. 2 Press to select [Setup] > [Picture]

> [Smart picture].

5 Use more of

your product

Access TV menus

Menus help you to install channels, change picture and sound settings and access other features.

1 Press MENU.

The menu screen appears. »

2 Press the to select and navigate

through one of the following menus.

[Watch TV]• Switches back to the aerial source if another source is selected. [Setup]• Accesses menus that allow you to change picture, sound and other TV settings. [Add new device]• Adds new devices to the home menu.

3 Press OK to conrm your choice. 4 Press EXIT to exit.

Tip

After selecting • [Add new device], follow the on-screen instruc tions to select the correct device and connector.

Add new device

Watch TV

Setup

English

• [Sharpness] Adjusts the level of sharpness in image details.

• [Noise reduction] Filters and reduces noise in an image.

• [Tint] Adjusts the colour balance in an image.

• [Custom tint] Make a customised tint setting. (Only available if [Tint] > [Custom] is selected)

• [Digital Crystal Clear] Fine-tunes each pixel to match surrounding pixels. This

produces a brilliant, high-denition image.

[Dynamic contrast]• Automatically enhances contrast in an image. A

[Medium] setting is recommended. [Dynamic backlight]• Adjusts the

brightness of the TV backlight to match lighting conditions. [MPEG artifact reduction]• Smoothes out transitions on digital pictures. You can switch this feature on or off. [Colour enhancement] • Makes colours more vivid and improves the resolution of details in bright colours. You can switch this feature on or off.

• [PC mode] Adjusts the picture when a PC is connected to the TV via HDMI or DVI.

• [Picture format] Changes the picture format.

• [Horizontal shift] Adjusts the picture horizontally for PC-VGA, DVI, HDMI or YP b Pr.

• [Vertical shift] Adjusts the picture vertically for PC-VGA, DVI, HDMI or YP b Pr.

3 Press to select one of the following

Smar t picture settings.

[Personal] • Lists customised personal picture settings.

[Vivid] • Maximises picture settings. [Standard] • Adjusts picture settings to

suit most environments and types of video. [Movie] • Applies picture settings ideally suited for movie viewing. [Game] • Applies picture settings maximised for fast-moving games. [Energy saving] • Applies low-energy picture settings.

4 Press OK to conrm your choice.

The selected Smart picture setting is » applied.

Manually adjust Picture settings

1 Press MENU. 2 Press to select [Setup] >

[Picture].

3 Press to select one of the

following picture settings.

• [Smart picture] Accesses pre-dened

smar t picture settings.

• [Contrast] Adjusts the intensity of bright areas, keeping dark areas unchanged.

• [Brightness] Adjusts the intensity and details of dark areas.

• [Colour] Adjusts colour saturation.

• [Hue] Compensates colour variations in

NTSC encoded transmissions.

Picture

Sound

Features

Installation

Software update

Settings assist.

Smart picture

Contrast

Brightness

Colour

Hue

Sharpness

Noise reduction

Action

Personal

Off

12 EN

[Wide screen]Stretches

the classic 4:3 format to 16:9.

[Unscaled]For HD and PC mode only, and in selected models only. Allows maximum sharpness. Some distor tion may be present due to the broadcaster’s systems. Set your PC resolution to wide screen mode for best results.

Use Smart sound

Use Smart sound to apply pre-dened sound

settings.

1 Press MENU. 2 Press to select [Setup] > [Sound]

> [Smart sound].

3 Press to select one of the following

Smar t sound settings.

[Standard] • Adjusts sound settings to suit most environments and types of audio. [News] • Applies sound settings ideally suited for spoken audio, such as the news. [Movie] • Applies sound settings ideally suited for movies. [Personal] • Applies the settings that were customised in the sound menu.

4 Press OK to conrm your choice.

The selected Smart sound setting is » applied.

Adjust sound settings

1 Press MENU. 2 Press to select [Setup] > [Sound].

The » [Sound] menu appears.

Change picture format

1 Press .

A picture format bar appears. »

2 Press or to select a picture format.

The selected picture format is » activated.

3 Press OK to conrm your choice.

Summary of picture formats

The following picture settings can be

congured.

Note

Depending on the for mat of the picture • source, some picture settings are not available.

[Auto format](Not for PC mode.) Enlarges the picture automatically to

best t the screen. The

subtitles remain visible. [Super zoom](Not for HD

and PC mode.) Removes the black bars on the side of 4:3 broadcasts. There is minimal distortion.

[4:3]Shows the classic 4:3 format.

[Subtitle zoom]Displays 4:3 pictures over the full area of the screen, with sub-titles visible. Part of the top of the picture is clipped off.

[Movie expand 14:9](Not for HD and PC mode.) Scales 4:3 format to 14:9.

[Movie expand 16:9](Not for HD and PC mode.) Scales 4:3 format to 16:9.

English

3 Press to select one of the

following sound settings.

[Smart sound]• Accesses pre-dened

smar t sound settings.

[Bass] • Adjusts the bass level. [Treble] • Adjusts the treble level. [Volume] • Adjusts the volume. [Vol.vis.impaired] • Adjusts the volume

of visually impaired audio when your current channel suppor ts visually impaired function. (Applies for UK only)

Note

• [Vol.vis.imparied] only appears if you select

[Setup] > [Installation] > [Language] > [Visually impaired] > [On]. [Visually impaired] • (Audio Descriptor): Sets

the mix of visually impaired audio with regular audio. When available, visually impaired audio includes audio descriptions of on-screen action.

[Balance] • Adjusts the balance of the right and left speakers to best suit your listening position. [• Audio language] Available for digital channels, when multiple languages are broadcast. Lists available audio languages. [Dual I-II]• Selects between audio languages if dual sound is broadcast. [Mono/Stereo] • Selects between mono or stereo if stereo is broadcast. [TV speakers]• Turns TV speakers on or off. [Surround] • Enables spatial sound.

Picture

Sound

Features

Installation

Software update

Standard

Smart sound

Bass

Treble

Volume

Vol.vis.impaired

Balance

Audio language

Dual I-II

English

Dual I

[Headphone volume] • Adjusts headphone volume. (Only appears when Professional mode is [Off]) [Auto volume]• Automatically reduces sudden volume changes, for example, when switching channels. When enabled, this produces a more consistent audio volume. [Delta volume]• Levels out volume differences between channels or connected devices. Switch to the connected device before you change the delta volume.

Use advanced Teletext features

Access the Teletext options menu

Most of the advanced Teletext features are accessed via the Teletex t options menu.

1 Press TELETEXT.

The Teletext screen appears. »

2 Press b (OPTIONS).

The Teletext options menu appears. »

3 Press to select one of the following

options.

[Freeze page]• Freezes the current page. [Dual/Full screen]• Enables and disables dual screen Teletext, which splits the current channel or source to the left of the screen, with Teletext on the right. [Reveal] • Hides or reveals hidden information on a page, such as solutions to riddles or puzzles. [Cycle subpage]• Cycles through subpages automatically if subpages are available. [Language] • Switches to a different language group to display a language correctly when that language uses a different character set.

14 EN

Use EPG

1 When watching TV, press a GUIDE.

The EPG planner screen appears. »

2 Press MENU.

The program guide menu appears. »

3 Press to select an option, and then

press OK to conrm it.

4 Press EXIT to exit the EPG menu.

Use the EPG options menu

Use the EPG options menu to set or clear reminders, change day and access other useful EPG options.

1 Press a GUIDE. 2 Press b (OPTIONS).

The EPG menu appears. »

3 Press to select one of the following

options.

[Show info]•

• [Search by genre]

4 Press OK to enter or activate the option. 5 Press EXIT to exit the EPG menu.

4 Press OK to conrm your choice. 5 Press TELETEXT to exit the Teletext

options menu.

Select Teletext subpages

A Teletext page can hold several subpages. Subpages are displayed on a bar next to the main page number.

1 Press TELETEXT .

The Teletext screen appears. »

2 Press to select a Teletext page. 3 Press to enter a subpage.

Use the Electronic Programme Guide

EPG is an on-screen guide available for digital channels. EPG allows you to:

View a list of digital programmes being • broadcast View upcoming programmes• Group programmes by genre•

Switch on EPG

1 When watching TV, press a GUIDE.

The EPG planner screen appears » displaying information about the scheduled programmes.

Note

EPG data is available only in selected countries • and can take some time to load.

Tip

Press • a GUIDE to switch between EPG and channel grid. (Channel grid will only appear in

some specic modes).

Use Timers

You can set timers to switch the TV on or

switch to standby at a specied time.

Automatically switch the TV to standby (Sleep timer)

Sleep timer switches the TV to standby after a

pre-dened period of time.

Tip

You can always switch off your TV earlier or • reset the Sleep timer during the countdown. Press • SLEEP on the Guest remote control to quick access the Sleep timer menu.

English

Use subtitles

You can enable subtitles for each TV channel. Subtitles are broadcast via Teletext or DVB-T digital broadcasts. With digital broadcasts, you have the additional option of selecting a preferred subtitle language.

Enable subtitles on analogue TV channels

1 Select an analogue TV channel. 2 Press TELETEXT. 3 Enter the three-digit page number of the

subtitle page with the Numeric buttons.

4 Press TELETEXT to switch off Teletext. 5 Press SUBTITLE.

The » [Subtitle mode] menu appears.

6 Select [On] to display subtitles always or

[On during mute] to display subtitles only

when audio is muted.

7 Press OK to enable subtitles.

Note

Repeat this procedure to enable subtitles on • each analogue channel.

Tip

Select • [Subtitle mode] > [Off] to disable subtitles.

Enable subtitles on digital TV channels

1 When watching digital channels, press

SUBTITLE.

The » [Subtitle mode] menu appears.

2 Select [On] to display subtitles always or

[On during mute] to display subtitles only

when audio is muted.

3 Press OK to enable subtitles.

1 Press MENU. 2 Press to select [Setup] >

[Features] > [Sleep timer].

The bar appears.. »

3 Press to set the sleep time.

The Sleep timer can be up to 180 »

minutes in steps of ve minutes. If set

to zero minutes, the Sleep timer is switched off..

4 Press OK to activate the Sleep timer.

The TV switches to standby after the »

pre-dened period of time.

Alarm (On timer)

You can switch the TV to a specied channel at a specied time, from standby or power-on

mode.

1 Press MENU. 2 Press to select [Setup] >

[Features] > [On timer].

3 Press OK or to enter the [On timer]

menu.

[Activate] Selects the frequency to •

[Off] or [Once] or [Daily].

[Time] Sets the starting time to switch •

on the TV automatically.

[Programme • no.] Selects the channel.

4 Press EXIT to exit.

Tip

Select • [On timer] > [Activate] > [Off ] to disable [On timer]. Refer to page 32 • “How to set the TV alarm?” for more details about TV alarm.

16 EN

Select a subtitle language on digital TV channels

Note

When you select a subtitle language on • a digital TV channel as described below, the preferred subtitle language set in the installation menu is temporarily over ruled.

1 Press MENU. 2 Press to select [Setup] >

[Features] > [Subtitle language].

3 Press OK or to enter the list of

available languages.

4 Press to select a subtitle language. 5 Press OK to enable your selection.

Tip

You can also access • [Subtitle language] menu while watching TV by pressing b(OPTIONS) > [Subtitle language].

Use the TV clock

You can display a clock on the TV screen. The clock displays the current time using time data received from your TV service operator.

Note

Please refer to page 31 • “Clock setup” for more details of Pro+ clock settings.

Display the TV clock

1 When watching TV, press b(OPTIONS)

The TV option menu appears. »

2 Select [Clock]. 3 Press OK.

Note

To disable the clock , repeat the above • procedure.

Change the clock mode

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Clock] > [Auto clock].

3 Press OK or to enter the [Auto clock]

menu.

4 Press to select [Automatic] or

[Manual].

5 Press OK to conrm.

Change the Time zone

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Clock] > [Time zone].

3 Press to select your Time zone. 4 Press OK to conrm.

Note

This option is only available if you select • [Auto clock] > [Manual] (In countries with clock transmission data).

Use Daylight saving

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Clock] > [Daylight saving].

3 Press OK or to enter [Daylight saving]. 4 Press to select [Standard time] or

[Daylight saving time].

5 Press OK to enable your selection.

Note

This option is only available if you select • [Auto clock] > [Manual].

English

View photos and play music from a USB storage device

Caution

Philips is not responsible if the USB storage • device is not suppor ted nor is it responsible for damage or loss of data from the device.

Your TV is tted with a USB connector that

enables you to view photos or listen to music stored on a USB storage device.

1 Turn on the TV. 2 Connect the USB device to the USB por t

on the side of your TV.

The home menu appears. »

3 Press to select [Browse USB]. 4 Press OK to conrm.

The USB thumbnail browser appears. »

Tip

Press • a GUIDE to switch between thumbnail and le browsing views.

View photos

1 In the USB thumbnail browser, select

[Picture] and press to enter.

2 Press a GUIDE to switch between

thumbnail and le browsing views.

3 Press to select a photo or a photo

album.

Add new device

Watch TV

Browse USB

Setup

4 Press OK to view the selected photo in

full screen mode.

Tip

When in full screen mode, press • to move between photos.

View a slide show of your photos

1 When a full screen image of a photo is

displayed, press OK.

A slide show begins from the selected » image.

2 Press:

• OK to pause the slide show.

The » icon appears.

Press • to go back or move for ward

to the next image.

• EXIT to stop the slide show.

Change slide show settings

1 When viewing a slide show, press

b(OPTIONS).

The slide show options menu appears. »

2 Press to select one of the following.

• [Start/Stop slide.] Star ts or stops a slide show.

• [Slideshow trans.] Sets the transition from one picture to the nex t.

• [Slideshow freq.] Sets the amount of time that a picture is shown.

• [Rotate image] Rotates a picture.

• [Show info] Displays the picture

name, date, size and next picture in the slide show.

3 Press OK to conrm your setting.

Note

• [Rotate image] and [Show info] appear only

when you press OK to pause the slideshow.

18 EN

4 Press to select a radio channel and

press OK to listen.

Note

Select • [Filter channels] > [All] to exit radio channels and view all channels.

Update the TV software

Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Check www.philips.com/support for availability.

Check the current software version

1 Press MENU. 2 Press to select [Setup] >

[Software update] > [Current software].

The TV displays the current software » information.

Update software (digital broadcasts)

You can update the TV software via a USB device or OAD.

Update using a USB device

Connect your USB device to the USB por t at the side of your TV.

1 If the sof tware update screen does not

appear automatically, select [Setup] > [Software update] > [Local updates]

> [USB] to update the TV software manually.

2 Follow the on-screen instructions to

complete the update.

Note

The TV restarts after the software update is • complete.

Listen to music

1 In the USB thumbnail browser view,

select [Music] and press to enter.

2 Press a GUIDE to switch between

thumbnail and le browsing views.

3 Press to select music or a music

album.

4 Press OK to play the selected music.

Music settings

When listening to music, press b(OPTIONS) to access one of the following music settings.

• [Start/Stop play]

• [Repeat/Play once]

• [Shufeon/off]

• [Show info]

• [TV speakers]

Disconnect a USB storage device

Caution

Follow this procedure to avoid damage to your • USB storage device.

1 Press EXIT to exit the USB browser. 2 Wait for ve seconds before you

disconnect the USB storage device.

Listen to digital radio channels

If digital broadcasting is available, digital radio channels are installed automatically during installation.

1 When watching TV, press OK to display

the channel grid.

2 Press b(OPTIONS). 3 Press to select [Filter channels] >

[Radio].

The radio channel grid appears. »

English

Update using OAD (On the Air software Download)

If Professional mode is [On], your TV automatically receives software updates in semi-standby mode without notice on screen. The TV restarts after the software update is complete.

Change TV preferences

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Preferences].

3 Press OK or to enter [Preferences].

[Location] • Optimises TV settings for

your location - home or shop.

Note

If [Shop] mode is selected:

The • [Smart picture] setting will be switched to [Vivid] automatically to display the br ightest backlight on screen.

E-sticker is applicable to display the T V selling • features on screen.

[Volume bar]• Displays the volume bar

when adjusting the volume.

[Channel info.]• Displays information

about the TV channel ever y time you switch channels. Select [Full] to view channel information or [Off] to turn off the channel information.

[EasyLink] • Enables one-touch play and

one-touch standby between EasyLink compliant devices.

[E-sticker]• For shop mode only. Sets the

location of the e-sticker.

Access decoder channel

You can map channels provided through a decoder or descrambler to your TV channel selection. In this way, you can select these channels by using the RC of your TV. The decoder or a descrambler must be connected to EXT1 (SCART).

Set decoder channel

Map channels from a decoder or descrambler

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Preferences] > [Decoder].

3 Press OK or to enter [Decoder] menu

4 Press to select [Channel] and press

OK or to enter.

A list of analogue channels appears on » the screen.

5 Press to select one channel to map

to the decoder/descrambler channel and press OK to conrm.

6 Select [Status] and press OK or to

enter.

7 Press to select [EXT 1] (SCART)

the connector used by the decoder/ descrambler.

8 Press OK. 9 Press EXIT to exit.

20 EN

Start a TV DEMO

Note

Before starting DEMO, make sure to activate one of the following setting for TV DEMO to take effect:

1. [PBS settings] > [PBS mode] > [Off].

2. [PBS settings] > [Applications] > [Signage].

1 Press Red button (DEMO) on the

remote control.

2 Press to select a demo and press OK

to view it.

3 Press Red button (DEMO) to exit.

Reset the TV to factory settings

You can restore the default picture and sound settings of your TV. Channel installation settings remain the same.

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Factory settings].

3 Press OK or to enter the [Factory

settings] menu.

A factory setting message appears. »

4 Select [Reset] to start resetting. 5 Press EXIT to exit.

English

6 Install channels

The rst time you set up your TV, you are

prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to

re-install and ne tune channels.

Automatically install channels

This section describes how to search and store channels automatically.

Step 1 Select your menu language

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Language] > [Menu language].

3 Press OK or to enter [Menu language].

4 Press to select a language setting. 5 Press OK to conrm. 6 Press to return to [Installation] menu.

Step 2 Select your country

Select your country for proper channel installation.

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Channel install.] > [Channel assistant].

Menu language

ock

Primary subtitle in

Picture

Sound

Features

Installation

Software update

Decoder

Language

Channel install.

Preferences

Decoder

Clock

Factory settings

Menu language

Primary audio language

Secondary audio language

- - - -

Hearing impaired

Menu language

English

3 Press OK or to enter the menu.

The country menu appears. »

4 Press to select your country. 5 Press OK to conrm your choice.

The channel installation guide appears » on the screen.

Step 3 Install channels

Install the available analogue and digital TV channels and digital radio channels automatically.

1 From the channel installation guide screen

, select [Full installation] to automatically install all T V channels and digital radio channels.

2 Press OK to conrm.

The TV starts to search and store all » the available channels.

Language

Channel install.

Preferences

Decoder

Clock

Factory settings

Menu language

Channel assistant

Location

Channel

Auto clock

Action

Picture

Sound

Features

Installation

Software update

Select your country, then press OK

Slovakia

Slovenia

Spain

Sweden

Switzerland

Turkey

Ukraine

Start automatic installation. This takes a few minutes.

Full installation

Skip installation

22 EN

3 Press OK or to enter [System] menu. 4 Press to select your country or

region.

5 Press OK to conrm. 6 Press to return to [Channel install.]

menu.

Step 2 Search and store new TV channels

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Channel install.] > [Analogue: Manual].

The » [Analogue: Manual] menu appears.

3 Press to select [Search] and then OK

or to enter [Search].

4 Press to manually enter the three-

digit frequency.

5 Press OK to begin search.

If a channel is unavailable at the » selected frequency, press OK to search for the next available channel.

6 Press ◄ when the new channel is found. 7 Press to select [Store new channel]

to store the new channel under a new channel number.

8 Press OK or to enter [Store new

channel] and press OK.

9 Press to return to the [Analogue:

Manual] menu.

Sound

Features

Preferences Start up message

Digital Test recept...

Picture

Sound

Features

Installation

Software update

Decoder

Language

Channel install.

Preferences

Decoder

Clock

Factory settings

Channel assistant

Standby update

Analogue: Manual

System

3 When installation is complete, press OK

to return to [Installation] menu.

Step 4 Update the channel list

You can choose to enable standby mode auto update of channels. If you enable this feature, the new channels stored in your TV will be updated every morning according to the channel information in the broadcast.

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Channel install.] > [Standby update].

3 Select [On] to enable the automatic

update or select [Off ] to disable it.

Manually install channels

This section describes how to search and store analogue TV channels manually.

Step 1 Select your system

Note

Skip this step if your sys tem settings are • correct.

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Channel install.] > [Analogue: Manual].

The » [Analogue: Manual] menu appears.

System searching. Please wait.

Stop

Digital channels found Analogue channels found

7 0

English

Reorder channels

After you install channels, you can rearrange the order in which they appear.

1 When watching TV, press OK to display

the channel grid .

2 Press b (OPTIONS).

The channel options menu appears. »

3 Press to select [Reorder] and then

OK to return to the channel grid.

4 Press to select the channel you

want to reorder and press OK.

The selected channel is highlighted. »

5 Press to move the highlighted

channel to your preferred position and press OK.

6 Press b (OPTIONS).

» [Done reordering] appears on the

screen.

7 Press OK to nish reordering.

Test digital reception

If using digital broadcasts, you can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish.

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Channel install.] > [Digital: test recept].

3 Press OK or to enter the menu. 4 Press to enter the frequency of

the channel you want to test.

5 Press OK to conrm the frequency and

then press OK again to conrm [Search].

6 When complete, select [Store] to store

the frequency.

Note

If the signal quality and strength is poor, • reposition the antenna or satellite dish and retest. If you still have problems with the reception • of your digital broadcast, contact a specialised installer.

Step 3 Fine-tune analogue channels

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Channel install.] > [Analogue: Manual].

The » [Analogue: Manual] menu appears.

3 Press to select [Fine-tune] and then

OK or to enter [Fine-tune].

4 Press to adjust frequency. 5 Press OK when done. 6 Press to select [Store current

channel] to store the ne-tuned channel

under the current channel number.

7 Press OK or to enter [Store curr.

chan.] and press OK.

8 Press to return to the [Channel install.]

menu.

Rename channels

Channels can be renamed so that a name of your choice appears whenever the channel is selected.

1 When watching TV, press OK to display

the channel grid .

2 Press to select the channel you

want to rename.

3 Press b (OPTIONS).

The channel options menu appears. »

4 Press to select [Rename channel].

A text input box appears. »

5 Press to select and change

characters.

6 Select [Done] to nish renaming

channels.

Tip

Use • [Aa] to change upper-case letter to lower-case let ter and vice versa.

24 EN

7 Professional

mode instruction

Introduction

Included in this TV is a special functional

mode that allows the TV to be congured for

Hospitality or Signage applications. This feature is called Professional mode.

This section has been designed to help install and operate this TV in Professional mode. Before reading this section, please read section 3 to 6 to set the basic functionality of this TV.

BenetsofProfessionalmode

This TV is specially designed to operate in Professional Mode. Professional Mode offers the

following benets:

Access to the • [Consumer Menu] can be blocked. This prevents users (e.g. guests) from deleting or changing channel settings and/or modifying picture and sound settings. This ensures that TVs are always set up correctly. A switch-on volume and channel can be • selected. After switching on, the T V will

always start on the specied volume level

and channel. The maximum volume level of the T V can • be limited in order to prevent disturbance to other guest. Channels can be blanked (Video only).• The TV local buttons • VOLUME +/-, P/ CH+/- and SOURCE can be locked

Screen information can be suppressed.•

Professional Setup Remote control (2573 optional)

English

a C button (OPTIONS)

Accesses options relating to the current activity or selection. (Equals to the function of b (OPTIONS) on Guest remote control).

b E button (OK)

Conrms an entry or selection.

c (Enters Professional setup menu)

Selects • SETUP mode rst. Press • M button to enter the Professional setup menu.

Note

• SETUP mode should be selected for hotel

installer.

Activating the Professional mode setup menu

1 Switch on the TV and select a TV channel. 2 Press the following buttons to access

Professional mode setup menu:

[3,• 1, 9, 7, 5, 3+¬(MUTE)] on Guest remote control. M button• on Professional setup remote control. (When SETUP mode is selected on the Professional setup remote control.)

3 Press ▲▼◄► on the remote control to

select and change any of the settings.

4 Select [PBS settings] > [Store] and select

[Conrm] to save the setting. Press MENU / EXIT to exit Professional mode menu

without saving.

5 For Professional mode settings to take effect,

you must restart the TV mains power.

26 EN

Professional mode options

This paragraph describes the functionality of each item in the Professional mode setup menu.

Layer 1 Layer 2 Layer 3

PBS settings PBS mode Off / On

Application Hospitality / Signage

Consumer setup Action

Smartloader / USB to TV Action

TV to Smartloader / USB Action

Store Action

Reset 0~60

Switch on settings Maximum volume 0 ~ 60

Switch on picture format Auto format / Super zoom / 4:3 / Subtitle Zoom

/ Movie expand 14:9 / Movie expand 16:9 / Wide screen / Unscaled

Low power standby (Green / Fast) Fast / Green

Power on On / Standby / Last status

Smart power Off / Low / Medium / High

Display message Off / On

Set ID (Only available in Signage mode)

Serial Xpress Adress ID range: 0~63

Switch on volume Last status Off / On

User dened 0 ~ 60

Switch on channel Last status Off / On

User dened [List of channels]

Welcome message Line 1 Edit

Line 2 Edit

Clear Action

Message Time-out 20 sec / 25 sec / 30 sec

Control settings Local KB block Off / On / All

RC lock Off / On

OSD display Off / On

High security mode Off / On

Auto scart Off / On (EXT 1 / EXT 2 / Power scar t)

HDMI-CEC in Off / On

USB break in Off / On

Monitor out Off / On

English

Layer 1 Layer 2 Layer 3

Enable teletext For Prison Off / On

Enable MHEG Off / On

Enable EPG Off / On

Enable subtitle Off / On

Clock setup (Only available for some models)

Display standby Off > 1 > 2 > 3 > 4 > 5

Display on Off > 1 > 2 > 3 > 4 > 5

Time setting Time setup table

Time download On / Off

Download program List of Analogue / Digital channels.

Time offset GMT: -12 > ....> 0 > ... > 12

Buzzer volume Off / Low / High

Speaker settings TV speaker enable On / Off

Independent main speaker mute On / Off

Default main speaker volume 0 ~ Max

Installation Blank channel All available channels.

Disable auto updating Software / Channels / Both / Off

Skip scrambled signals Off / On

Smart RC Off / On

Multi remote control Blue / Green / Yellow / Red / Off

Add current channel to PayTV ring

R0 All available channels.

R1 Pay TV channel list.

R2 Pay TV channel list

28 EN

PBS settings

[PBS mode] Enables / disables the Professional mode.

[On]: • All settings in the Professional

mode Setup menu are in effect. [Off]: • The TV operates as a normal (consumer) TV.

[Application]

1 When application is [Hospitality], the

following are activated.

Last status is disabled.• Limited Consumer menu: When • in Professional mode, the guest can display the Consumer menu to adjust TV parameters. However, these settings will not be stored in TV memory. TV lock and parental ratings (except • Sleep timer) are disabled. Entry into service mode is disabled • in order to prevent the guest from changing service settings.

2 When application is [Signage], the below

functions behave as per normal consumer.

Last status is enabled.• The full TV menu can be accessed and • changes are stored in TV memory. TV lock and parental ratings are • enabled. Entry into service mode is enabled.•

Note

• The default application for TV should be

[Hospitality], while that for monitor should be [Signage].

[Consumer setup]

A shortcut to enter the full TV menu. This allows the installers to do all the TV setup settings.

Note

Selects • [PBS settings] > [Store] to save the changes in the [Consumer setup

menu].

[Smartloader / USB to TV]

Loads the TV conguration data (including the

video, audio, channel Table, and Professional mode settings) from a Smartloader / USB device to the TV set.

[TV to Smartloader / USB]

Loads the TV conguration data (including the

video, audio, channel Table, and Professional mode settings) from the TV set to a Smartloader /USB device.

[Store]

Selects [Conrm] to store Professional mode settings.

Note

After storing the settings, refer to page 29 “Low power standby (Green / Fast)”:

When • [Fast] is selected, you need to restart the TV mains power for the changes in Professional mode to take effect. When • [Green] is selected, you need to switch the TV from standby to on again for the changes in Professional mode to take effect.

[Reset]

Selects [Yes] to reset all settings in Professional mode to factory default.

Switch on settings

[Maximum volume]

This option species the maximum allowable

volume level of the TV.

[Switch on picture format]

Sets available picture format when the TV is switched on.

Note

If the picture format is not supported • with the activated source, [Auto format] detection is applied.

English

[Low power standby (Green / Fast)]

Denes the power mode when TV enters to

standby by pressing remote control power button or TV local power button.

[Fast]: • When set, the TV will enter semi- standby mode to achieve fast powering up. [Green]: • When set, the TV will enter low standby power mode to achieve minimum power consumption.

[Power on]

The power on function allows the TV to enter a specic mode ([On], [Standby], or [Last status]) of operation after the mains power is activated.

[On]: • When set, the TV will always turn on after the mains power is activated. [Standby]: • When set, the TV will always turn to standby after the mains power is activated. [Last status]:• When set, the T V will always turn to the last status (either On or Standby) whenever the mains power is activated.

[Smart power]

Adjusts the picture backlight to achieve the following power saving mode.

[Off]: • Smar t power is disabled. ( Vivid mode is applied). [Low]: • The picture backlight is at low power saving mode. (Movie mode is applied). [Medium]: • The picture backlight is at medium power saving mode. (Standard mode is applied). [High]: • The picture backlight is at high power savings (Energy saving mode is applied).

[Display message]

[Off]: • Disables the display of the

welcome message.

[On]: • Enables the display of the welcome message for a pre-dened time after the

TV turns on from standby or off.

Note

• Selects [Welcome message] ≥ [Message

time-out] to set the period of time to

display the welcome message.

[Set ID]

(Only available in [Signage] mode). This function allows installer to designate a serial ID number for each TV. Through the ID number, the installer can control each TV by using RS232-device-chaining.

Switch on volume

When the guest switches the TV on, it will play at

the specied volume level.

[Last status]• : If [On] is selected, the TV will be automatically switched to the last volume status whenever the mains power is turned on. (The volume level can not exceed the [Maximum volume] level). [Userdened]• : (Only appears when you select [Last status] ≥ [Off ]. )The guest can adjust his/her preferred switch on volume level.

Switch on channel

When the guest switches the TV on, it will play at

the specied channel.

[Last status]• : If [On] is selected, the TV will be automatically switched to the last channel status whenever the mains power is turned on. [Userdened]• : (Only appears when you select [Last status] ≥ [Off]). The guest can choose his/her preferred switch on channel.

30 EN

Welcome message

The Welcome message function allows the TV to show a customized greeting to the hotel guest whenever the TV is switched on. This helps to personalize the hotel experience for guests. The Welcome message can consist of 2 lines of text, with each line containing a maximum of 20 alphanumeric characters. Use

▲▼◄►on the remote control to compose

the Welcome message.

Note

• To activate the Welcome message, the

[Display message] option must be [On]. Welcome message is always disabled if you • select [Control settings] > [OSD display] > [Off.]

[Line 1]• : Sets the characters of the rst line message.

[Line 2]• : Sets the characters of the second line message. [Clear]: • Clear the settings in Line 1 and Line 2. [Message Time-out]• : Sets the period of time to display the welcome message on the screen when TV is turned on from standby / Off.

Control settings

[Local KB lock]

[Off]: • The TV local buttons VOLUME+/-, P/CH +/- and SOURCE

will function normally.

[On]: • The TV local buttons VOLUME +/-, P/CH +/- and SOURCE are

locked. [All]: • All TV local buttons are locked, including BPOWER button.

[RC lock]

Disables the operation of the Guest remote control.

[Off]: • All buttons on Guest remote control will function normally.

[On]: • All buttons on the Guest remote control are disabled. (It is still possible to enter the Professional setup menu by pressing [3, 1, 9, 7, 5, 3+¬(MUTE)]).

[OSD display]

Sets this function to show or hide screen information.

[Off]: • Screen information is suppressed. [On]: • Normal screen information is

displayed.

[High security mode]

[Off]: • Professional mode setup menu

can be accessed by both Guest remote control (Press [3, 1, 9, 7, 5, 3 + ¬(MUTE)] )and the Professional setup remote control (Press M button) [On]: • Professional mode setup menu can only be accessed by the Professional setup remote control.

[Auto scart]

Enables auto scart switching or break-in Professional mode.

[Off]: • Disables auto scar t switching or break-in Professional mode. [On]: • Enables auto scart switching or break-in Professional mode. [EXT 1]:• (SCART 1)(Only available if EXT I source is connected to the TV). Selects EXT I as the auto switching source when TV restarts from standby / Off, or when EXT 1 signal is detected. [EXT 2]:• (SCART 2)(Only available if EXT 2 source is connected to the TV). Selects EXT 2 as the auto switching source when TV restarts from standby / Off, or when EXT 2 signal is detected. [Power scart]: • Sets scar t source as power on / off button. When the connected scart source is turned on / off, the TV enters to on / standby mode simultaneously.

English

[HDMI-CEC in]

HDMI-CEC (Philips EasyLink) enables one-touch play and one touch standby between HDMI-CEC compliant devices.

Note

Before activating HDMI-CEC in function, make • sure the HDMI-CEC compliant devices are turned to on. Selects • [EasyLink] > [On] rst before enabling [HDMI-CEC in] in Professional mode. Refer to page 40 on • “Use Philips EasyLink” for more details about HDMI-CEC function.

[Off]: • Disables HDMI-CEC feature in Professional mode. [On]: • Enables HDMI-CEC feature in Professional mode.

[USB break-in]

Enables or disables USB break-in feature in Professional mode.

[Off]: • When USB is plugged in, the [Multimedia] menu will not appear automatically, but users can access [Multimedia] menu from the

[Consumer setup] menu. [On]: • When USB is plugged in,

the [Multimedia] menu appears automatically.

[Monitor out]

Refer to the blanking and muting of the video and audio out to prevent illegal copying of TV channels.

[Off]: • Disables monitor out. [On]: • Enables monitor out.

Note

If SCART 1 is selected as TV input source, • monitor out function will be disabled through SCART 2.

[Enable teletext]

[Off]: • Disables teletext in Professional

mode. [On]: • Enables teletex t in Professional mode.

[Enable MHEG] (For UK only)

[Off]: • Disables MHEG in Professional

mode. [On]: • Enables MHEG in Professional mode.

[Enable EPG]

[Off]: • Disables EPG in Professional

mode.

[On]: • Enables EPG in Professional mode.

[Enable subtitle]

[Off]: • Closes subtitles in Professional

mode. [On]: • Displays subtitles in Professional mode.

Clock setup

Note

Only applicable for the models with clock • display.

[Display standby]

Adjusts the brightness of clock display when the TV is in standby mode.

[Display on]

Adjusts the brightness of clock display when the TV is on.

[Time setting] (Appears if you select [Clock setup] ≥ [Time download] ≥ [Off]) Sets the time manually.

32 EN

[Time downloading]

[Off]: • Sets the time manually from the [Time setting] menu. [On]: • Sets the time by downloading from the signal system in the [Download program] menu.

[Download program] (Appears if you select [Clock setup] ≥ [Time download] ≥ [On]). Selects the programme

where time downloading must be performed.

[Time offset] (Appears if you select [Clock setup] ≥ [Time download] ≥ [On]) Selects the correct time zone which is downloaded from [Download program].

[Buzzer volume]

Selects the volume of the clock buzzer.

How to set the TV alarm?

1 Selects [Hospitality] in the [Application]

menu.

2 Sets the time either from [Time setting] or

[Download program]. When set, the time

will be shown on the clock display.

3 Press ALARM ON on the Guest remote

control to access the [Alarm] menu.

[Alarm time]: • Sets the alarm time. [Alarm status]: • Displays current alarm

status. [Alarm off]:• Selects [ Ye s] to cancel the alarm or [No] to keep the alarm enabled.

Note

When • the alarm is enabled, icon appears on the clock display. Press • ALARM OFF on the Guest remote control to cancel the alarm, icon disappears from the clock display simultaneously.

Speaker settings

[TV speaker enable]

[Off]: • Disables the T V speaker. The

headphone volume functions normally. [On]: • The TV speaker is enabled. (Default setting).

[Independent main speaker mute] This option only appears when you select [TV speaker enable] ≥ [On].

[Off]: • Press ¬(MUTE) or”+/- on the

Guest remote control will affect both the TV speaker and the headphone volume (Default setting) [On]: • Press ¬(MUTE) on the Guest remote control will affect the TV speaker volume only. The headphone volume functions normally.

Note

If the TV speaker is muted independently, • press”+/- on the Guest remote control will only affect the headphone volume.

[Default main speaker volume] Only appears when you select [Independent main speaker mute] ≥ [On]. Users can set the TV

speaker and headphone volume to a certain level as the default setting. This option can avoid sudden high-volume when TV speaker is turned on again from independently mute.

Installation

[Blank channel]

The Blank channel function disables the display of video on the TV, but does not affect the audio output. This function can be used for audio applications (example: music-only channels, and so on) which do not necessarily require the display of video.

1 Enters the [Blank channel], the list of all

channels appear.

2 Selects one or more channels and press OK

to mark.

3 The channels marked with [X] will not

display video on the TV.

English

[Disable auto updating]

[Software]: • Disables automatic TV

software update via OAD (On the air software download). [Channel]: • Disables automatic channel installation when new channels are detected. [Both]: • Disables automatic update of the TV software and the channel installation. [Off]: • Enables automatic update of the TV software and the channel installation.

[Skip scrambled signals]

[Off]: • Allows scrambled channels in

the channel list. [On]: • Skips the scrambled channels in the channel list.

[Smart RC]

[Off]: • PayTV channels are accessible

via the Guest remote control. [On]: • PayTV channels are only accessible via the Smoovie remote control.

[Multi remote control]

Guest remote control supports up to four televisions operating in one room without interference from each other’s remote controls. Each TV and the Guest remote control can be set to match each others.

1 Enter [Multi remote control] and

designate one colour (Blue / Green / Yello w / Red) to the TV. Select [Off] to disable [Multi remote control] function.

2 Set the Guest remote control to the

corresponding colour by pressing MENU and one of the colour button simultaneously for more than 4 seconds.

3 The Guest remote control can operate

the TV with the corresponding colour.

Note

EXAMPLE: • Press MENU and Red button

simultaneously on the Guest remote control for more than 4 seconds to operate the TV with [Red] colour selected in [Multi remote control] menu. Guest remote control will be set to default •

Blue colour after replacing batteries.

Add current channel to PayTV ring:

This function allows you to customized PayTV channel list.

1 Switch to the channel you prefer to add into

the PayTV ring.

2 Enter [Add current channel to PayTV ring]

menu.

3 Select one of the PayTV ring below to mark

current channel to:

[R1]: • If [Smart RC] is [On], R1 channels marked with [X] are only accessible via the Smoovie remote control 1. [R2]: • If [Smart RC] is [On], R2 channels marked with [X] are only accessible via the Smoovie remote control 2.

4 Enter [R0] (all available channels) to unmark

the channels you have marked in [R1] and [R2] to prevent users from watching full

PayTV channels via Guest remote control.

Note

All non-PayTV channels are listed in • [R0].

34 EN

a PC IN (VGA and AUDIO IN)

Audio and video input from a computer.

b EXT 2 (Y Pb Pr and AUDIO L/R)

Analogue audio and component video input from analogue or digital devices such as DVD players or game consoles.

VGA

PC IN(AUDIO)

8 Connect devices

This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start.

Note

Different types of connectors may be used to • connect a device to your TV, depending on availability and your needs.

Back connector for 22 inch TV

English

f SPDIF OUT

Digital audio output to home theatres and other digital audio systems.

g HDMI 1

Digital audio and video input from high-

denition digital devices such as Blu-ray

players.

Connections via DVI or VGA require an additional audio cable.

h SERV. U (For Pro+ 3v3 signal level Serial

Xpress)

For technical application only.

AUDIO

SPDIF OUT

c EXT 1 (CVBS and RGB)

Analogue audio and video input from analogue or digital devices such as DVD players or game consoles.

d TV ANTENNA

Signal input from an antenna, cable or satellite.

e AV OUT (VIDEO OUT and AUDIO

OUT L/R)

Audio and video output to analogue devices such as another TV or a recording device.

TV ANTENNA

36 EN

i IR LINK (Only in some models)

Connector for an IR Link compliant device. (e.g. set-up box).

IR LINK

Back connector for 26 inch TV and larger

a HDMI 1 (HDMI and AUDIO IN)

Digital audio and video input from high-

denition digital devices such as Blu-ray

players.

SPDIF

OUT

Audio input from devices that require a separate audio connection, such as a compute r. Connections via DVI or VGA require an additional audio cable .

b EXT 3 (Y Pb Pr and AUDIO L/R)

Analogue audio and component video input from analogue or digital devices such as DVD players or game consoles.

c EXT 1 (RGB and CVBS)/EXT 2 (CVBS)

Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. EXT 2 supports S-Video.

EXT1/ EXT2

(RGB/CVBS)/ (CVBS)

English

d TV ANTENNA

Signal input from an antenna, cable or satellite.

e SPDIF OUT

Digital audio output to home theatres and other digital audio systems.

f SERV. U (For Pro+ 3v3 signal level Serial

Xpress)

For technical application only.

g IR LINK (Only in some models)

Connector for an IR Link compliant device. (e.g. set-up box).

IR LINK

TV ANTENNA

Side connector

a COMMON INTERFACE

Slot for a Conditional Access Module (CAM).

b AUDIO L/R

Audio input from analogue devices connected to VIDEO.

38 EN

c VIDEO

Composite video input from analogue devices such as VCRs.

d USB

Data input from USB storage devices.

e L(Headphone)

Stereo audio output to headphones or earphones.

f HDMI (Only for TVs 26 inches and

larger)

Digital audio and video input from high-

denition digital devices such as Blu-ray

players.

Connect a computer

Before you connect a computer to the TV

Set the screen refresh rate on your • computer to 60Hz. Select a supported screen resolution on • your computer.

Connect a computer with one of the following connectors:

Note

Connections via DVI or VGA require an • additional audio cable.

HDMI cable•

DVI-HDMI cable•

DVI

LEFT / RIGHT HDMI 1 / DVI

AUDIO IN :

PC IN(AUDIO)

For TV of size 26 inch and larger

For TV of size 22 inch

English

HDMI cable and HDMI-DVI adaptor•

VGA cable•

Use a Conditional Access Module

A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels.

Note

If required, refer to documentation from your • operator on how to insert a smart card into the Conditional Access Module.

DVI

LEFT / RIGHT HDMI 1 / DVI

AUDIO IN :

PC IN(AUDIO)

For TV of size 26 inch and larger

For TV of size 22 inch

VGA

PC IN(AUDIO)

For TV of size 22 inch only

Insert and activate a CAM

Caution

Be sure to follow the instructions described • below. Wrong insertion of a CAM may damage both the CAM and your T V.

1 Switch off the TV. 2 Following the directions printed on the

CAM, gently insert the CAM into the COMMON INTERFACE at the side of the TV.

3 Push the CAM in as far as it will go. 4 Turn on the TV and wait for the CAM to be

activated. This may take several minutes. Do not remove the CAM from the slot when in use — removing the CAM will deactivate digital ser vices.

Access CAM services

1 After inserting and activating the CAM,

press MENU.

2 Press to select [Setup] > [Features]

> [Common interface].

Applications provided by the digital TV » service operator appear on the screen.

Note

This menu option is available only if the CAM • is inserted and activated correctly.

40 EN

Use Philips EasyLink

Your TV supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink-compliant devices.

Note

Compliant devices must be connected to your • TV via HDMI.

Enable or disable EasyLink

Note

Do not enable Philips EasyLink if you do not • intend to use it.

1 Press MENU. 2 Press to select [Setup] >

[Installation] > [Preferences] > [EasyLink].

3 Select [On] or [Off ].

Use one-touch play

1 After enabling EasyLink, press play on

your device.

The TV automatically switches to the » correct source.

Use one-touch standby

1 Press and hold Standby on the TV’s or

device’s remote control for at least three seconds.

The TV and all connected HDMI » devices switch to standby.

Use a Kensington lock

There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table.

English

9 Product

information

Product information is subject to change without notice. For detailed product

information, go to www.philips.com/support.

Supported display resolutions

Computer formats

Resolution • - refresh rate:

640 x 480 - 60Hz• 800 x 600 - 60Hz• 1024 x 768 - 60Hz• 1280 x 720 - 60Hz• 1280 x 768 - 60Hz• 1280 x 1024 - 60 Hz• 1360 x 768 - 60 Hz • 1440 x 900 - 60Hz (For Full HD only)• 1680 x 1050 - 60Hz (For Full HD only)• Via HDMI/DVI input•

Video formats

Resolution • - refresh rate:

480i - 60Hz• 480p - 60Hz• 576i - 50Hz• 576p - 50Hz• 720p - 50Hz, 60Hz• 1080i - 50Hz, 60Hz• 1080p - 24Hz, 25Hz, 30Hz, 50Hz, •

60Hz.

Multimedia

Supported • storage device: USB (Only

FAT or FAT 32 USB storage devices are supported)

Supported • multimedia le formats:

Images: • JPEG Audio: • MP3

Note

Multimedia le names must not exceed 128 •

characters.

Tuner/Reception/Transmission

Aerial • input: 75ohm coaxial (IEC75) DVB: • DVB Terrestrial, DVB-T MPEG4 (only

in some models) TV • system: DVB COFDM 2K/8K; PAL I, B/G, D/K; SECAM B/G, D/K, L/L’

Video • playback: NTSC, SECAM, PAL Tuner • Bands: Hyperband, S-channel, UHF,

VHF

Remote control

Type: • RC-6

• Batteries: 2 x A AA (LR03 type)

Power

Mains • power: 220-240V, 50Hz ~ 60Hz Standby • power: < 0.3W Ambient • temperature: 5 to 40 degrees

Celsius

Supported TV mounts

To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the

back of the TV.

Warning

Follow all instructions provided with the TV • mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper T V mounting that results in accident, injur y or damage.

TV screen size (inches)

Required pitch (mm)

Required mounting bolts

22 100 x 100 4 x M4 26 100 x 200 6 x M4 32 200 x 200 4 x M6

42 EN

10 Troubleshooting

This section describes commonly encountered issues and accompanying solutions.

General TV issues

The TV does not switch on:

Disconnect the power cable from the • power outlet. Wait for one minute then reconnect it. Check that the power cable is securely • connected.

The remote control is not working properly:

Check that the remote control are • correctly inserted according to the +/orientation. Replace the remote control batteries if •

they are at or weak.

Clean the remote control and TV sensor • lens.

The standby light on the TV blinks red:

Disconnect the power cable from the • power outlet. Wait until the TV cools down before reconnecting the power cable. If the blinking reoccurs, contact Philips Consumer Care.

You forgot the code to unlock the TV lock feature

Enter ‘8888’. •

The TV menu is in the wrong language.

Change the TV menu to your preferred • language.

When turning the TV on/off to standby, you hear a creaking sound from the TV chassis:

No action is required. The creaking sound • is normal expansion and contraction of the TV as it cools down and warms up. This does not impact performance.

When TV start-up time is slow:

Select • [Fast] mode in [Low power standby] menu.

TV channel issues

Previously installed channels do not appear in the channel list:

Check that the correct channel list is • selected.

No digital channels were found during the installation:

Check that the TV supports DVB-T or • DVB-C in your country. See the listed countries on the back of the TV.

Picture issues

The TV is on, but there is no picture:

Check that the antenna is properly • connected to the TV. Check that the correct device is selected as • the TV source.

There is sound but no picture:

Check that the picture settings are correctly • set.

There is poor TV reception from an antenna connection:

Check that the antenna is properly • connected to the TV. Loudspeakers, unear thed audio devices, • neon lights, high buildings and other large

objects can inuence reception quality.

If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the TV. If reception on only one channel is poor, •

ne tune this channel.

There is poor picture quality from connected devices:

Check that the devices are connected • properly. Check that the picture settings are correctly • set.

The TV did not save your picture settings:

• Check that the TV location is set to the home setting. This mode offers you the

exibility to change and save settings.

English

Thepicturedoesnottthescreen;itistoo

big or too small:

Try using a different picture format. •

The picture position is incorrect:

Picture signals from some devices may •

not t the screen correctly. Check the

signal output of the device.

Sound issues

There is a picture but sound quality is poor:

Note

If no audio signal is detected, the TV • automatically mutes the audio output — this does not indicate malfunction.

Check that all cables are properly • connected. Check that the volume is not set to 0. • Check that the sound is not muted. •

There is a picture but the sound quality is poor:

Check that the sound settings are • correctly set.

There is a picture but sound comes from one speaker only:

Verify that sound balance is set to the • centre.

HDMI connection issues

There are problems with HDMI devices:

Note that HDCP suppor t can delay the • time taken for a T V to display content from a HDMI device. If the TV does not recognize the HDMI • device and no picture is displayed, tr y switching the source from one device to another and back again. If there are intermittent sound • disruptions, check that output settings from the HDMI device are correct.

If a HDMI-to-DVI adaptor or HDMI to • DVI cable is used, check that an additional audio cable is connected to AUDIO L/R or

AUDIO IN (mini-jack only).

Computer connection issues

The computer display on the TV is not stable:

Check that a supported resolution and • refresh rate is selected on the computer. Set the TV picture format to unscaled. •

If you cannot resolve your problem, refer to the FAQs for this product at www.philips.com/ support. If the problem remains unresolved, contact Philips Consumer Care in your country as listed

in the warranty leaet.

Warning

Do not attempt to repair the product yourself. • This may cause severe injur y, irreparable damage to your produc t or void your warranty.

Note

Make a note of your TV model and serial • number before you contact Philips. These numbers are printed on the back of the T V and on the packaging.

44 EN

factory settings 20

HDMI

HDMI-CEC in 31 Troubleshooting 43

Hospitality 28

Installation

Automatic 21 Manual 22

Kensington lock 40

Language

Audio language 13 menu language 21 subtitle language 16 Troubleshooting 42

Lock

Kensing ton lock 40 Local KB lock 30

Low power standby 29

Main menu 10 Troubleshooting 42

Monitor out 31 Multimedia

Technical specications 41 USB 17

Multi remote control 33 Music 18

One-touch play 40 One-touch standby 40

Index

ALARM 7, 32 Application

Hospitality 28 Signage 28

Batteries 41

Channel list

install

Automatic 21

Manual 22 PayTV ring 33 Test digital reception 23 Troubleshooting 42 Update 22

clock 16

setup 31

Computer

Connect 38 display resolutions 41 Troubleshooting 43

DEMO 20 Digital channels

CAM 39 Test digital reception 23

Display resolutions 41

EasyLink

disable 40 Enable 40 one-touch play 40 one-touch standby 40

EPG 14

Professional mode EPG 31

English

Photo

Slide show 17 USB 17

Picture format 12 Picture settings 10 POWER 8

Low power standby 29 Power on 29 Smar t power 29 Technical specications 41

Professional mode

Activat 25 Options 26 PBS mode 28 Settings 28

Remote control

Professional Setup Remote control 24 RC lock 30 Technical specications 41 Troubleshooting 42

Signage 28 Smart card 39 Smart settings 12 Software version 18 Sound settings 12 Subtitles

On analogue channels 15 On digital channels 16 Professional mode subtitle 31

Technicalspecications 41 Teletext 9, 13 Troubleshooting 42 TV overview 6

USB

Listen to music 18 USB break-in 31 View photos 17

Video formats 41 Volum 9 Volume 7

Wall mounts 41 Welcome message 30

Philips 32HFL4351D-10, 26HFL3331D-10, 19HFL3331D-10, 22HFL4371D-10, 26HFL4371D-10 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual