Philips 15PT2536-94 User Manual

User Manual

Safety information Connecting peripherai equipment Before Calling Service

Conffratuhtions !

on Becoming

iáe proud owner

ofa

^BiCips

Coù}urle.Ì£.vision

Congratulations on becoming the proud owner of a Philips CTY

Your television set has been designed, engineered and tested to very high standards to provide superior quality Picture and Sound for your enjoyment

Philips Colour Television means that the best design, reliability and quality are ensured with every set manufactured. In addition, your set complies with International Safety Standards -1 EC 65.

Your television set has a host of features. Please read this 'Operating Instructions' booklet carefully and get to know about your set.

We wish you a very enjoyable viewing on your new Philips Colour Television.

SiipartsgP'icture

Disconnect mains plug when : the indicator light below the TV screen is flashing continuously, a bright white line is displayed across the screen, there is a lightning storm. the set is left unattended for a prolonged period of time.

cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth.

No naked flame sources, such as lighted candles, should be placed on top of the TV or in the vicinity.

Do not place your TV set under direct sunlight or heat.

Leave at least 10 cm around each side ofTV set to allow for proper ventilation.

Avoid placing your set (e.g. near the window) where it is likely to be exposed to rain or water.

No objects filled with liquids should be placed on top the TV so as to avoid dripping or splashing of liquids on the set.

V-?0'

Useful information

Do not leave your set on standby mode for a prolonged period of time. Switch off set to allow it to be demagnetised. A demagnetised set supports good picture quality.

Do not shift or move the set around when it is switched on. Uneveness in colour in some parts of the screen may occur.

Never attempt to repair a defective TV yourself. Always consult a skilled service personnel.

Other equipment

Amplifier

Side connections

S-VIDEO УШЕОШ L AUDIO R 0

S s s Sii gli 133

t и í и

O Carry out the connections as shown. Q To optimise picture quality, connect the

equipment which produces the video signals (digital decoder, games, etc) to AVI in and equipment which produces the S-Video signals S-Video and Hi-8 video recorders, certain DVD drives to AV2 in and all other equipment to either AVI in or AV2 in.

O To connect to a hi-fi system, use an audio

connection cable and connect the “L” and “R” outputs on the TV set to the “AUDIO IN”“L” and“R” input on your hi-fi amplifier. Make the connections as shown.

With the GB key, select the channel Side. For a monophonic device, connect the audio

signai to the AUDIO L input Use the key to reproduce the sound on the left and right speakers of the TV set

Headphones

When headphones are connected, the sound on the TV set will be cutTheVOL + or keys are used to adjust the volume level.

The headphone impedance must be between

32 and 600 Ohms.

Below is a list of frequently occurred symptoms. Before you call for service, make these simple checks. Some of these symptoms can easily be rectified if you know what to do.

Symptom

Colour patch (uneveness)

No power

No picture

Good picture but no sound

Good sound but poor colour or no picture

Snowish picture and noise

Horizontal dotted lines

Double images or

“Ghost” images

TV not responding to remote control handset

No colour in picture

One white line across

What you should do

• Switch off the TV by the mains power button. Wait for 20 minutes before switching on again.

• Check the TV is not placed too near speakers or magnetic objects.

• Check the TV’s AC power cord is plugged into the mains socket. If there is still no power, disconnect plug. Wait for 60 seconds and re-insert plug. Switch on the TV again.

• Check the antenna connection at the rear of the TV.

• Possible TV station problem.Try another channel.

• Try increasing the volume.

« Check that the sound is not muted. If it is muted, press the

Mute button on the remote control to restore sound.

• Try increasing the contrast and brightness setting.

• Check antenna connection at the rear of the TV.

• Possible electrical interference e.g. hairdryer, vacuum cleaner, etc. Switch off appliances.

• Possible poor positioning of antenna. Using a highly directional antenna may improve reception.

• Check life span of batteries of remote control handset.

• Aim remote control handset directly at remote control sensor lens on the TV.

• Select your desired colour system manually if reception is poor in Auto mode.

• Switch-off the TV immediately and call for after-sales service

Features depends on specific to type no. of model. Specification are subject to change without notice.

Installing your television set

Positioning the television set

I 10 cm

10 cm10 cm

Place yourTV on a solid, stable surfoce, leaving a space of at least 10 cm around the

appliance.

Connections

• Insert the aerial plug into the T socket at the rear of the set.

If you are using an indoor aerial, reception may be difficult in certain conditions. You can improve reception by rotating the aerial. If the reception remains poor, you will need to use an external aerial.

• Insert the mains plug into a wall socket.

The keys on the TV set

The television set has 4 keys which are

located at the top or front.

-IMSnLL MENUn

- VOLUME +

_______

CHANNEL

PHILIPS

3115 116 15963

Remote control

Insert the two R6-type batteries making sure

that they are the right way round.

If remote control is not used for a long period of time remove the batteries and store it in a cool, dry place.

Switching on

To switch on the set, press the on/off key. A red indicator means that the television is on

standby mode. Refer to the next page on 'Remote Control keys'for the various keys that you could use to switch on the set An indicator light will flash when it is receiving signal from the remote control.

The Volume +/- keys are used to adjust the sound levels. The Channel +/- keys are used to select channels. To access or exit the main menu, press down the Volume +/- keys, simultaneously. To select an item in the main menu, press the

Channel +/- key.

To select an adjustment, press down the

Volume +/- key.

C к Connecting peripheral equipment

DVD player

Q Connect the TV’s green, blue and redY Pb Pr

Q Connect the TV’s red and white (R and L)

Q Turn on theTV and DVD player. Set the TV to

Video recorder

О Connect the TV’s yellow, white and red (AV2

Q Connect the TV’s red and white (R and L)

Q Turn on theTV andVCR player. Set theTV to

(AVI in) jacks to the corresponding COMPONENTVIDEO OUT jacks on the player.

AUDIO IN jacks to the corresponding AUDIO OUT jacks on the player. Match the cable colour to the jacks’ colour.The red jack is the Right audio channel and the white jack is the Left audio channel.

CVI and DVD background screen will come on the screen.You can now play your disc.

Note: You need to select the channel CVI manually to playback DVD disc.

in) jacks to the corresponding Video and Audio jacks on the player.

AUDIO IN jacks to the corresponding AUDIO OUT jacks on the player. Match the cable colour to the jacks’ colour.The red jack is the Right audio channel and the white jack is the Left audio channel.

channel AV2.You can now play your video cassette tape.

Connection is also possible via the aerial cable.

You will therefore need to tune in your video recorder's test signal and assign a channel number 0. Select channel 0 to playback.

E Ш Remote control keys

Personal Zapping

You can surf up to 10 personal

channels for each key

Sleeptimer

Selects a period of time after

which theTV will go into standby

mode automatically.

Add Personal Zapping list

Adds and stores channels into

Personal Zapping list

Smart Sound

Used to access a series of stored

settings: Theatre, Music, Voice,

Hall, Indipop, Raga, Orchestra,

Bhajan, Disco, Opera, Bhangra,

Gazal, Personal.

To call up or exits menus.

Cursor

These 4 keys are used to move

around the menus or provide direct

access to the different picture

formats

Volume

To adjust the sound level.

Digit keys

Direct access to the channels. For

a 2-digit channel, enter the 2nd

digit before the dash disappears.

Alternate channel

Switched between the current

and the previous channel.

0 Ш Ш

-ITI - ..

Standby

Lets you place theTV set on standby. To turn on theTV, press CH + or

(!) ,AV,A/CH or digit keys.

AV channel selection

Press several times to select AVI, CVI,AV2,YPbPr or Side.

Delete Personal Zapping list

Deletes stored channels from Personal Zapping list

Smart Picture

Used to access a series of stored settings: Rich, Natural, Soft, DVD/ VCD or Personal.

Incredible Surround

To activate/disable the Incredible Surround feature. In stereo, the speakers appear further apart In mono, a pseudo-spatial effect is obtained.

During stereo transmission (in AV mode), to switch from Stereo to Mono. During dual sound transmission, to switch betwen language 1 or n.

Channel selection

To access the next or previous channel.The number and sound mode are displayed for a few moments whenever you select a new channel.

Mute

To mute or restore sound.

On screen display

To display/clear the on screen information. Press the key for 3 seconds to activate permanent display of channel number.This key is also used to exit from the menu.

Doming

СЖ1Ж1

• A prolonged view of very bright static picture can lead to devlopment of uneven colour patches in some portions of the screen. This is not a defect and will disappear in few minutes after moving picture resumes

This menu is used to store all available channels automatically.

O Press the 0 key. Q With the cursor, select the Install menu

and follow by the Auto Store.

’ Channel 2

TV 470 MHz

.........................

►...........................

Manual Store

This menu is used to store channels one at a time.

O Press the g key. Q With the cursor, select the Install menu

and follow by the Manual.

■ Sound Sys

■ Search

• Channel

■ FlnelUne

■ Store

O Colour Sys(tem): use the ^9 or

key to select the desired colour system;

Auto, PAL, NTSC 3.58 or NTSC 4.43.

O Use the key to start auto store. All the available TV channels will be stored automatically. This operation takes a few mlnutes.The display shows the progress of the search and the number of channels found.

OTo quit the menus, press @ .

Q Sound Sys(tem): use the U or ^B

key to select the desired sound system; BG, I, DKorM.

Q Search: Press gj.The search starts.

Once a channel is found, the scanning stops. Go to the next step.

Q Channel: enter the required channel

with the^B,^B or digit keys.

Q Fine Tune: If the reception Is not

satisfactory, adjust using the W or W keys.

@ Store: Press ^B .The channel Is stored. Q Repeat steps Q to Q for each channel

you wish to store.

(^To quit the menus, press @.

This feature allows you to rearrange channels according to your preference.

Q Press the O l^ey'The Main menu is

displs^ed on the screen.

0 With the cursor, select the Install menu

followed by the Sort menu.

0 Use the O or O key to select the

channel number you want to change

Language Auto Store 092 Manual 093

Edt 095

Channei edit

This feature allows you to skip or edit channels which have bad or weak TV signal or channels you do not watch often.

Once a djonnef is skipped, you cannot have

access to it by the Channel + or - fcey.You can only access the channels by the digit (0-9) keys.

from (e.g.001) and confirm selection with the key.

o Use the CB or CB key to select the

channel number you want to change to

(e.g. 004) and confirm selection with the

The chonge is done. Channel 4 will move up to channel 3 and dionnef 3 will move up to chonne/

0 Repeat steps 0 and o for each

channel you wish to change.

0 To quit the menus, press 0.

Press the ^ key.The Main menu is

displ^d on the screen.

With the cursor, select the Install menu

followed by the Edit menu,

Enter into the menu and select the

channel number you wish to skip by the

digit keys.

Then use the

Use the

Repeat steps 0 and o for each

channel you wish to skip.

0 To quit the menus, press 0.

key to select On.

k^ to select Skipped.

lb restore skipped channels

Repeat steps O to 0 above.

Use the O key to select Skipped and

the

key to selea Off.

Repeat steps 0 and 0 for each

channel you wish to skip.

To quit the menus, press 0.

J [ Timer Function

This feature allows you to set the timer to switch to a channel at a specified time while you are watching another channel or when the TV is on standby mode.

Note:Timer will be disabled once the set is switdiedoff.

0 Press 0, use the key to select

Features and press the ^B key.

The Features menu is displayed.

« Format Start Timo

• DiglSIr'alMatar

- Ey»H

- Gaiim

Use the О key to selea Timer.

You can block certain channels or inhibit use of the TV set completely. Note:You can only access the locked channels via the remote control. Keep the remote control in a

saß place.

0 Press ф, use the key to selea

Features and press the ^B key.

The Features menu is displayed.

■ Utiar '^AççaaaÇoda

■ Fomat

• DCV

■ DCV demo

Use the ^B key to selea Child Lock

and press the CB key to enter.

Key in the 4-digit access code, for the first time or if you have forgotten the code, enter 0711 twice. There will be a prompt to k^ in the

New Code.

Key in your preferred code once and

again to confirm.

Staptlim Chamal Activata Dlaploy

Correct

Description of function: Time: enter the current time. StartTIme: enter the time for the TV to

switch on or to switch channel. Stop Time: enter the time to switch to standby.

Note: If Stop Time is not keyed in,Tv vnll go to standby mode after 4 hours.To switch on the TV from standby, press Channel + or dl0t or Power hey.

Channel: enter the channel to switch to. Activate: enter mode of activating timer;

Once, Daily or Off.

Display: selea On to display the time on the

TV screen.

Press the 0 key to exit

The Child Lock menu is displayed.

Use the

key to selea a fonaion and the CB key to enter or confirm selection.

■СМИ Lock A

■/LaokChamal ooa

• Change Coda

• CtavMI DM

• LocfcAlI DOS

003

Ш DOT

Description of function: Lock Channel: use the ^B or ^B key

to selea a channel number to lock and press the CB key to confirm. The Q symbol will display next to the channel that was locked.

Change Code: enter a new code and

again to confiorm.

ClearAII: use to unlock all locked

channels. Selea On to activate.

Lock All: use to lock all TV and external

channels. Selea On to activate.

0Press 0 to exft.

The DCV monitors and adjusts incoming video signals to help provide the best picture quality.When you choose to turn the DCV to On or Display On, the Brightness, Colour, Contrast, Sharpness, Digi Contrast and Digi Picture++ features are controlled automatically. DCV adjusts these picture settings continuously and automatically.

Enter Features menu as described in

“Features settings” on the previous page.

Use the O key to selea DCV and

press the ^B key to selea Off, On

or Display On.

Press the 0 key to exit

Description of option: Offi the DCV will not be aaivated. On: the DCV will work to give the viewer

• Sound * itwtall

•Tlmef

• Child Lock

• Format

• DCVdamo

the best possible piaure, but will not display the monitoring screen when channels are changed.

Display On; an DCV monitoring screen will

be shown for a few seconds whenever

a channel is changed.

Light Sensor On: The piaure get's adjusted

to ambient room light

Note: Intelligent TV On-Off allows for further improvement in piaure quality

(switch off Intelligent TV if it interferes with the piaure).

The split screen display shows the image performance before and after enhancements to present clearly the effects of the picture enhancement features.

a Soimd

* Inatall

Enter Features menu as described in

“Features settings” on the previous page,

0 Use the ^B key to selea Demo and

press the CB key to selea On or Off.

• Timer

■ Child Lock

• Format

• DCV

The screen is split to dramatically show the comparative images side by side.

without picture

enhancements

vñth picture

enhancements

Specifications

Model Type Picture tube screen size (Diagonal) 36 cm 51 cm Picture tube visible size (Diagonal) Audio Output (PMPO) 80 W 80 W TV System PALB/G PALB/G Colour System NTSC 4.43.3.58 Playback NTSC 4.43.3.58 Playback Sound System Antenna Input 75 Ohms coaxial 75 Ohms coaxial External connections Rear AV IN & OUT Rear AV IN & OUT

Operating Voltage / Frequency 150-276 Volts/50Hz 150-276 Volts/50Hz 150-276 Volts/50 Hz Power consumption (normal) Standby Power <3W <3W

Set Dimensions: Width 36 cm 49.5 cm 44.4 CM

Net Weight (appx.only) 9.5 Kg 18 Kg 13 Kg

Model Type Picture tube screen size (Diagonal) Picture tube visible size (Diagonal) 36.8 CM Audio Output (PMPO) TV System Colour System Sound sWem Antenna Input External connections RearAV IN & OUT

Operating Voltage / Frequency 150-276 Volts/50 Hz Power consumption (normal) Standby Power <3W

Set Dimensions: Width 44.4 CM

Net Weight (appx.only) 13 Kg

Model Type Picture tube screen size (Diagonal) Picture tube visible size (Diagonal) Audio Output (PMPO) TV System Colour System Sound sWem Antenna Input External connections

Operating Voltage / Frequency 150-276Vdlts/50Hz 150-276 Volts/50Hz ISO-278 Volts/50Hz Power consumption (normal) Standby Power

Set Dimensions: Width 60 CM 80 cm 62.7 cm

Net Weight (appx.only) 25 Kg 25 Kg 25 Kg

14 Vardaan,& 14РП415

35.7 cm

B/G5.5 B/G5.5

38W+/-10% 50Wd^-10% 39W-g/-10%

Depth 38 cm 48.5 cm 40.3 CM Height

Depth 40.3 CM Height 35.7 CM

Depth 52 CM 52 cm 50.5 cm Height

35 cm 45.5 cm

15PT2538 37 CM 53 CM

140W

PALB/G NTSC 4.43.3.58 Playback BG5.5 75 Ohms Coaxial

39 W-17-10%

21PT2448 53 CM

51.6 CM 250 W F%LB/G NTSC 4.43.3.58 Playback BG5.5 75 Ohms Coaxial RearAV IN&OLTT

55W-U-10% 55W+/-10% 60W+/-10% <3W

46 CM

Specifications

20 Vardaan

50.3 cm

21PT2216

52.7 CM 200W RALB/G NTSC 4.43.3.58 Playback BG5.5 75 Ohms Coaxial RearAV IN & OUT 150-276 Volts/50 Hz 55Wd/-10% <3W

52.2 CM

46.1 CM

23.5 CM

23.5 Kg

21PT2443 53 cm 53 cm

51.6 cm 52.3 cm 200W 400 W PAL B/G.AV Stereo PAL B/G.AV Stereo NTSC 4.43.3.58 Playback NTSC 4.43,3.58 Playback B/G5.5 B/G5.5 75 Ohms coaxial 75 Ohms coaxial RearAV IN & OUT RearAV IN & OUT

<1W <1W

46 cm 46.5 cm

15PT2528 37 CM

36.8 CM 100W PALB/G NTSC 4.43.3.58 Playback BG5.5 75 Ohms Coaxial RearAV IN & OUT

<3W

35.7 CM

21RF Vardaan 53 cm

51.6 cm 200W PALB/G. ECOAVStereo NTSC 4.43.3.58 Playback B/G5.5 75 Ohms coaxial RearAV IN & OUT

150-278 Volts/50Hz 55W+/-10% <3W 60 cm 52 cm 46 cm 25 Kg

21PT3442

Picture settings

Press Ф then ШЗ

will be called up.

* teind * Г—1ШМ * Inttill

Use the O or

setting and the ^B or ^B ke

Nate: during the picture adjustment, only the selected line remains displayed. Press

Press 0 to exit.

', The Piaure menu

• Colour

• Contrast

• SharpnoM

• Dffl Colour

• Di|^ nctureHH*

keys to selea a

to display the menu again.

Sound settings

Press 0, selea Sound (O) and press

^B. The Sound menu will be called up.

. Ркашя

• FMUM

• iMtaji

Use the

and the О or

Press 0 to exft.

• Вам

•AVL

i key to selea a setting

key to adjust.

Features settings

Press selea Features

CB.

The Features menu will be called up.

ndum

Sowtd

Hwr

l*o»iwS«y«r

I Format

IMclS<sn>IMetw

Eya-FI

Смпм

(^B)

and press

Description of the adjustments;

• Brightness: this changes piaure brillance.

• Colour: this changes the intensity of the

colour.

• Contrast: this changes the difference

between the light and dark tones.

• Sharpness: this changes the picture

definition.

« Hue: this adjusts the skin colour tone in

NTSC channel.

•Dig! Color +; this changes the colour

rendering: Cold(bluer), Normal (balanced) or Warm (redder).

• Digi Piaure++: attenuates piaure noise

(snow) in difficult reception conditions.

• Digi Contrast: autoniatic adjustment of the

picture contrast which permanently sets the darkest part of the piaure black.

Description of the adjustments;

• Treble: this alters the high frequency sounds.

• Bass: this alters the low frequency sounds.

• Balance: this balances the sound on the left

and right speakers.

• AVL (AutomaticVolume Leveller):this is used

to limit increases in sound, especially on channel change or advertising slots.

• Digi Real Audio (Incredible Surround):

this boost the effea of stereo sound.

• Digi Bass; this is used to enhance bass

output.

Description of the features:

• Timer, Child Lock, Format,Eye-FI, Dev, Dev demo. Power Saver, DigiStgnal Meter, Game: see explanation on the nett few pages.

This feature enhances your viewing pleasure by providing you with a choice of tv«> picture

formats;- 4:3 and Expand 4:3.

Press 0, use the

or O key to selea

Description of funaion: 4:3 - selea this format if you want to display

a conventional picture using the full surface of the screen.

Features and press the CB key.

The Features menu is dlspl^ed.

Use the O key to selea Format and

press the ^B key to selea 4:3 or

Expand 4:3.

Press the 0 key to exit.

Expand 4:3 - selea this format if you want

to expand pictures transmitted in a ‘letterbox’ format (black horizontal bars at the top and bottom of the screen) to fill up the entire screen.

°rY

Letterbox

The Eye-Fi monitors and adjusts incoming video signals to help provide the best piaure quality.When you choose to turn the ^-Fi to On or Display On, the Brightness, Colour, Contrast, Sharpness, Digi Contrast and Digi Pictura++ features are controlled automatically. Eye-Fl adjusts these piaure settings continuously and automatically.

1 L

• Timer

• FormM

• DigiSigiMlMatar

• Gvnei

• Bound * Inolili

DigiSignalMeter is an intelligent feature which measures the incoming signal and

graphically represents the signal strength on your TV screen.

Note:Default mode for Intelligent TV(visible under Piaure sub-menu only when Eye-Fi isswitched On) is either Auto/Off depending upon the signal condition. It can be switched On (if default Off) for further improvement in piaure quality (switch off

Intelligent TV if it interferes with the piaure, status is stored per channel).

Enter Features menu as described In

“Features settings” on the previous page.

Use the

press the Of key to selea Off, On

or Display On.

Press the 0 key to exft.

key to selea Eye-Fi and

Description of option: Offi the Eye-Fi will not be aaivated. On: the Eye-Fi will work to give the viewer

the best possible picture, but will not display the monitoring screen when channels are changed.

Display On: an Eye-Fl monitoring screen

will be shown for a few seconds whenever a channel is changed.

Expand 4:3

M к Personai Zapping

A list or series of favourite TV programs can

be selected and stored in the 4 coloured keys with the Personal Zapping feature.With this feature you can easily viewred up to a total of

10 preferred channels for each coloured key.

To add channels:

Selea a channel with the digit keys.

Press 0 to display list

Press your favourite colour key to store

the channel in step 0.

Repeat steps 0 to 0 to store more

channels.

0 Press 0to exft.

Power Saver is an environmentally friendly feature which reduces power consumption of your TV by switching to optimal settings for picture and sound.

Selea Power Saver on or Selea steps of 30 minutes (upto 180 minutes).

Selea Game

(Toggle Between Super Raceo^

Power Ludo4>Cricket4>Power Word)

Selea Play to start pitying or Help-Line for Rules

To delete channels:

Selea and press a colour key that has

stored channels repeatedly to selea the

channel you want to delete. 0 Press to display list. 0 Press @ to remove channel. 0 Repeat steps0to0delete more channels. 0 Press 0 to exit

To view channels:

Selea and press a colour key that has stored channels repeatedly to selea the channel you want to view.

Pleturi

■Sound

iPFcatur»

I Install

i Tlacr

■aponer Stïtp i Forait

Tiaar

/Penar Siïtp

■ Forait

■ Di giSignt mater

■Eye-Fi

■ Eiaei.

Picture Tiaer

■ Sound Child Lock /Features k Foriit

■ Initall D.C.V

■ Tiaer

■ Child Lock

■Forilt

■D.C.V

■PigiSignaLheter /Caaes. ^

Ifiaiei

/(■■•

■ PUr

■ Hilp-Unt

Tlur

Poutn SiïtP

► Forait

Sigi Signa matar

Siai PUy Help-line

Supar Rica

■

Specifications

Model Type Picture tube screen size (Diagonal) Picture tube visible size (Diagonal) 52.3 cm Audio Output (PMPO) 1000 W TV System MuHi System. AV Stereo (Dolour System Sound System Antenna Input 75 Ohms coaxial External connections Rear AV IN & OUT & YUV, SIde AV IN

Operating Voltage / Frequency Power consumption (normal) Standby Power <1W

Set Dimensions; Width 62.7 cm

Net Weight (appx.only)

Model Type 29PT2204 Picture tube screen size (Diagonal) 72 cm Picture tube visible size (Diagonal) Audio Output (PMPO) TV System Multi System, AV Stereo Colour System PAL, NTSC 3.58. NTSC 4.43, SECAM Sound System Antenna Input 75 Ohms coaxial External connections Rear AV IN & OUT & YUV, Side AV IN

Operating Voltage / Frequency 150-27eVoHs/50Hz Power consumption (normal) Standby Power <1W

Set Dimens'tons: Width 75.7 cm

Net Weight (appx.only) 45.51^

Model Typo Picture tube screen size (Diagonal) Picture tube visible size (Diagonal) Audio Output (PMPO) 400 W TV System Multi System, AV Stereo (Dolour System Sound System B/G, 1, DK, M Antenna Input 75 Ohms coaxial External connections Rear AV IN & OUT & YUV. SVHS IN

Operating Voltage / Frequency Power consumption (normal) Standby Power <1W

Set Dimensions; Width 74.2 cm

Net Weight (appx.only)

Depth Height 48.7 cm

Depth 49.3 cm Height

Depth Height

21PT2404 53 cm

PAL, NTSC 3.58. NTSC 4.43, SECAM B/G, 1, DK, M

150-276 Volts/50Hz B4W-rV-10%

50.5 cm 28iqj

Specifications

69 cm

1000W

B/G, 1. DK. M

114W+/-10%

58.2 cm

Specifications

29PT2552 72 cm 69 cm

PAL, NTSC 3.58, NTSC 4.43, SECAM

150-276 Volts/50Hz 85W+/-10%

49.8 cm

59.1 cm 42 Kg

Philips 15PT2536-94 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Safety information Connecting peripherai equipment Before Calling Service

Coù}urle.Ì£.vision

Congratulations on becoming the proud owner of a Philips CTY

Your television set has been designed, engineered and tested to very high standards to provide superior quality Picture and Sound for your enjoyment

Philips Colour Television means that the best design, reliability and quality are ensured with every set manufactured. In addition, your set complies with International Safety Standards -1 EC 65.

Your television set has a host of features. Please read this 'Operating Instructions' booklet carefully and get to know about your set.

We wish you a very enjoyable viewing on your new Philips Colour Television.

SiipartsgP'icture

Useful information

Other equipment

Amplifier

Side connections

Installing your television set

Positioning the television set

Connections

The keys on the TV set

Remote control

Switching on

C к Connecting peripheral equipment

DVD player

Video recorder

E Ш Remote control keys

Manual Store

Channei edit

lb restore skipped channels

J [ Timer Function

Picture settings

Sound settings

Features settings

Description of the adjustments;

Description of the adjustments;

Description of the features:

M к Personai Zapping

To add channels:

To delete channels: