Philips 20PF5120/79, 20PF5120/28B, 20PF5120/98, 15PF5120/28B, 20PF5120 Quick Use And Hookup Manual

Quick Use and Hookup Guide

CONTENTS

EnglishSimplified

TV CHANNEL INSTALLATION . . . . . . . . 1

UNFOLD THE BASE. . . . . . . . . . . . . . . 1

INSTALLING LCD TV ON THE WALL . . 2

PRESENTATION OF THE LCD TV . . . . . 2

ACCESSORIES. . . . . . . . . . . . . . . . . . . . 3

BATTERY INSTALLATION . . . . . . . . . . . . 3

REMOTE CONTROL OPER ATION . . . . . . 3

ANTENNA TV . . . . . . . . . . . . . . . . . . 4

BASIC CABLE TV CONNECTION . . . . . 4

T

UNER MODE CONTROL . . . . . . . . . . . . . 5

AUTO PROGRAM (SETTING UP

CHANNELS) . . . . . . . . . . . . . . . . . . . . 5

CABLE BOX (WITH RF IN /OUTPUTS) . . 6
CABLE BOX (WITH AUDIO /VIDEO

OUTPUTS) . . . . . . . . . . . . . . . . . . . . . 6

S-VIDEO CONNECTIONS . . . . . . . . . . . 7

COMPONENT (HD) CONNECTIONS . . . 7

PC (MONITOR) INPUTS . . . . . . . . . . . 8

NOTE: This quick setup guide is used with several
different LCD TV models. Not all features (and drawings)
discussed in this manual will necessarily match those
found with your LCD TV set. This is normal and does not
require that you contact your dealer or request service.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE

IMPORTANT

INSTALLING LCD TV ON THE WALL

The stand of your LCD TV complies with the VESA standard, if you intend to install the LCD TV on the wall,
please consult a professional technician for proper installing.

Wall Mounting of your LCD TV :

Put your LCD TV set on a safe and fl at surface, then

1

fold the base backward.
Note: To fold the base requires a degree of force.

Use for the TV set a Vesa compliant wall mount (not included).

2

(For 15 inch: 75x75 mm , For 20 inch: 100x100 mm)

.

Use for installation by a professional technician.

3

Note: The manufacture accepts no liability, ensure installation is
done by a professional technician.

UNFOLD THE BASE

Expanding the base requires a degree of force; please use sufficient force to unfold the base.
When unfolding the base, place the TV on a flat, sturdy surface before expanding the base.

1

3138 155 23881

TV CHANNEL INSTALLATION

3

4

DC IN

16V

DVI-I IN AUDIO IN

DVI (HDCP / PC ANALOG)

Y Pb Pr L R

COMPONENT HD/SD

COMPONENT VIDEO

AUDIO IN

VIDEO

IN

AUDIO

IN

L

R

AV / S-VIDEO

S-VIDEO

TV

-

Vo lu m e

+

- C h a n n e l +

M e n u

2

1

AU T O ST O R E

PL E A S E W A I T

PR O G . F O U N D 0

IN S T A L L

LA N G U A G E

ST A R T ?

MA I N C O N T R O L S

PI C T U R E

AU D I O

FE A T U R E S

IN S T A L L

AU T O P R O G R A M

FREQUE NCY

MHZ

MA NU A L S T OR E

CH AN N EL S ET T IN G

LA NG U AG E
AU TO P RO G RA M

FA CT O RY R ES E T

MA NU A L S T OR E

CH AN N EL S ET T IN G

FA CT O RY R ES E T

2

3
4

1
3
5

1

Immediately after unpacking and plugging in your new television, run the auto program function
to set up the TV for the broadcast or cable channels available in your area. If you do not run the
auto program function to set up the channels , your television may not operate properly.

Please follow these steps to install TV channels:

Select a TV source via AV+ button on your remote control.

1

Press the CURSOR RIGHT button to confi rm.

Press MENU button on your remote control to open the onscreen menu.

2

Press CURSOR DOWN to move to INSTALL, press CURSOR RIGHT on your

3

remote control to enter INSTALL.

Press CURSOR DOWN to move to AUTO PROGRAM.

4

Press CURSOR RIGHT to start auto install the TV Channels.

5

For more detailed explanation of AUTO PROGRAM, please refer to
AUTO PROGRAM section on page 5.

PRESENTATION OF THE LCD TV

Television Keys

1

• VOLUME + / - : To adjust sound level.

• CHANNEL + / - : To select programs.

• MENU : To access or close onscreen menu.

Power button, LED light and infrared sensor

2

• : To switch the TV on or off.

• Aim remote control at infrared sensors to activate
TV controls.

Rear connectors

3

Remove the cable cover to access the connectors at
the rear of the LCD TV.

Bottom connectors

4

Located at the bottom of the set.

2

ACCESSORIES

Owner`s Manual & Quick Use and Hookup Guide

Tuner L-Adapter

Power adapter & cable

Warranty Card

Warranty Card

Warranty Card

Guarantee Card

(/79) (/98)

Tuner L-Adapter

Warranty Card

Warranty Card

Warranty Card

Guarantee Card

(/79) (/98)

3

1

2

BATTERY INSTALLATION

When you unpack this unit, make sure it includes the
following:

REMOTE CONTROL OPERATION

Sleep button

Press to set the LCD TV to turn itself off within a
certain time.

AV button

Press to select the video input source: PC, DVI, TV, AV,
S-Video, HD.

Teletext keys

Unused key

Menu button

Press to activate onscreen menu, back to previous level
inside the onscreen menu, or press to exit the onscreen
menu.

Picture Format button

Press the FORMAT button
repeatedly to toggle among the three screen format
sizes; 4:3, EXPAND 4:3, COMPRESS 16:9.

Cursor Buttons
(Lef t, Right, Up, Down)-

Press these buttons to highlight, select, and adjust items
on the TV’s on screen menu.

Volume button

Press to increase or decrease the sound level.

Remove the battery compartment lid on

1

the bottom of the remote control.

Place lithium cell in the remote control.

2

Be sure the (+) and (-) ends of the
batteries line up as marked inside the
battery (CR2025)compartment.

Reattach the battery

3

compartment lid.

Power button

Press to turn the LCD TV on or off.

I-II button / Sound mode

Press repeatedly to select Mono,
Stereo, Dual I, Dual II, Nicam Mono, Nicam Stereo,
Nicam Dual I, Nicam Dual II.

Incredible Surround but ton-
Adds greater depth and dimension to TV sound.
Select from Incredible Surround or OFF.

Teletext

Mute button

Press to eliminate or restore the LCD T V sound. Mute will
appear on the screen when the sound is muted.

Channel button

Press to adjust the channel up or down.

Smart Sound button

Press repeatedly to select among the 4 settings; Personal,
Voice, Music, or Theatre.

Smart Picture but ton

Press repeatedly to select either
Personal, Rich, Natural, Soft, or
Multimedia picture setting.

Number buttons

Press the number but tons for direct access to the TV
channels. For a 2 digit channel, enter the 2nd digit after
enter 1st digit.

Information Button­Press to see the current channel number on the TV
screen.

3

P P but ton

Press to go to previously selected channel.