Philips 14PV210 01, 14PV210 07 User Manual

CONTENTS

1. CONNECTING YOUR TV-VIDEO COMBI 4..............

Connecting the cables 4.............................

Connecting a decoder or other equipment 4............

2. INSTALLING YOUR TV-VIDEO COMBI 5................

Initial installation 5..................................

Allocating a decoder 5..............................

Manual TV channel search 6.........................

Satellite receiver 6..................................

Special installation functions 7.......................

Automatic TV channel search 7......................

Channel Number Allocation 7........................

Delete a TV Channel 8...............................

Setting the language 8..............................

Setting the time and date 8...........................

3. IMPORTANT NOTES FOR OPERATION 10..............

SUMMARY OF USER GUIDE 10.......................

User guide (OSD) 10.................................

4. TV SET FUNCTIONS 11..............................

Selecting a TV programme 11........................

Automatic volume control (AVL) 11....................

5. PLAYBACK FUNCTIONS 12..........................

Playing a cassette 12................................

Playing NTSC cassettes 12...........................

Tape position indication 12...........................

Searching for tape position with the picture (picture

search) 12.........................................

Still picture 12......................................

Searching for tape position without the picture (wind

and rewind) 12.....................................

Instant View 12.....................................

Automatic search for a tape position (index search) 12..

Picture interference 13..............................

Cleaning the video heads 13.........................

Continuous playback 20.............................

Switch off function (SLEEP TIMER) 21.................

Switch on function (WAKE-UP TIMER) 21..............

9. Before you call an engineer 22.......................

Technical terms used 22.............................

6. MANUAL RECORDING 14............................

Recording without automatic switch-off 14............

Recording with automatic switch-off (OTR

one-touch-recording) 14.............................

Protecting your recordings 14........................

Auto-assembling 14.................................

7. PROGRAMMED RECORDING (TIMER) 16...............

’VPS’ (Video Programming System) and ’PDC’

(Programme Delivery Control) 16.....................

Programming a recording (with ’VIDEOplus’) 16........

Programming a recording (without ’VIDEOPlus’) 17.....

How to check or change a TIMER 18..................

8. ADDITIONAL FUNCTIONS 19.........................

How to read TELETEXT 19............................

Parental control 19..................................

Switching the On-screen display (OSD) on or off 20.....

3

OPERATING INSTRUCTIONS IN BRIEF

The remote control

TELETEXT e TELETEXT: To switch TELETEXT on or off

STANDBY m Switch off : To switch off set, interruptmenu

function, interrupt a programmed recording
(TIMER)

0-9 Number buttons:0-9

CLEAR Delete: To delete lastentry or clear

programmed recording (TIMER)

TIMER k TIMER: To make a manual TIMER

programming or to alter or clear a
programmed TIMER

MENU Menu : To call up or end main menu

OK Store/Confirm: To store or confirmentry

P pAB Programme number: To select a programme

number up or down

AP q Select: One line up
P rB Select: One line down

SpDC Volume: To regulate the volume

DSr Select: Cursor left
SqC Select: Cursor right

y Volume off: To switch the volume on or off

z Previous programme number: To select the

previous programme number

PLAY G Playback: To play a recorded cassette

H Rewind: During STOP and STANDBY:rewind,

during PLAYBACK: reverse scanning

STOP h Pause/Stop: To stop the tape, except while a

TIMER-recording is being made

I Forward wind: During STOP and STANDBY:forward wind, during PLAYBACK:

forward scanning

INDEX E Index search: In combinationwith H / I : to search for previous/next

recording on the cassette.

RECORD/OTR n Record: To record the programme selected

STILL R Still picture: To stop the tape and show a still picture

Coloured TELETEXT-buttons: To select TELETEXT pages directly

(red) Select page/chapter shown in red at the bottom of the screen

(green) Select page/chapter shown in green at the bottom ofthe screen

(yellow) Select page/chapter shown in yellow at the bottom of the screen

(blue) Select page/chapter shown in blue at the bottom of the screen

Front of the set

Back of the set

8 Power switch : To switch off the set

Beware: If you switch the set off with the power switch 8

possible!

Standby : To switch off, interrupt a function, interrupta programmed recording (TIMER)

m

Programme number : To select programme number up or down

P p

Sp

Volume: To regulate the volume

Record: To record the programme selected

5

Rewind : During STOP and STANDBY: rewind, during PLAYBACK:reverse scanning

H

Forward wind: During STOP and STANDBY: forward wind,during PLAYBACK: forward

I

scanning

Playback : To play a recorded cassette

G

Pause/Stop, eject cassette: To stop the tape and during STOPeject the cassette

?

Audio input socket

AUDIO

Video input socket : To connect a camcorder or videogames

VIDEO

Headphones socket: To connect headphones

w

, TIMER-recordings are not

EXT.1 Scart socket: To connect a satellite receiver, decoder, video recorder, etc.

Aerial input socket: To connect the aerial cable

2

OPERATING INSTRUCTIONS PHILIPS 14PV210/07

Congratulations! You now own one of the most sophisticated

and simple-to-use TV-VIDEO Combinations on the market.
With this TV-VIDEO Combi you can record and play
VHS-standard cassettes.

Please take the time to read this operating manualbefore
using your TV-VIDEO Combi.

Safety instructions and other notes

ADanger: High voltage!

Do not remove the top cover asthere is a risk of an electrical
shock!

AThe TV-VIDEO Combi does not contain any componentsthat can

be repaired by the customer. To switchoff the TV-VIDEO Combi
completely you must switch itoff with the power switch

BMake sure that air can circulate freelythrough the ventilation

slots on the TV-VIDEO Combi.

8 .

So that you can identify your machine in the eventof theft,
enter the serial number (PROD.NO) here. The serialnumber is
printed on the type plate fixed at the rear of the set.

MODEL NO. 14PV210/07

PROD.NO: ......

This product complies with therequirements of the Directive
73/23/EEC + 89/336/EEC + 93/68/EEC.

Technical information

Measurements in cm (W / H / D): 39.2/ 40.7 / 39.8
Power consumption (Standby) : less than 45W(less than 4W)
Voltage : 198-264V 50Hz
Headphones : Output resistance less than 120Ohms maximum

output voltage more than 2.6V at 120 Ohms

BMake sure that no objects or liquids enterthe TV-VIDEO Combi.

If liquid is spilt intoit, disconnect the TV-VIDEO Combi
immediately from the powersupply and call the After-sales
Service for advice.

BThe TV-VIDEO Combi should not be used immediatelyafter

transportation from a cold to a hot areaor vice versa, or in

conditions of extreme humidity.
After unpacking the TV-VIDEO Combi,it should be allowed to
acclimatize for at least three hours beforeinstallation.

C These operating instructionshave been printed on nonpolluting

paper.

C Deposit old batteriesat the relevant collection points.
C Please make use ofthe facilities available in your countryfor

disposing of the packaging of the TV-VIDEOCombi in a way that
helps to protect the environment.

C This electronic equipmentcontains many materials that can be

recycled. Please inquire about the possibilitiesfor recycling
your old set.

DVIDEOPlus+ and PlusCode are registered trademarksof

Gemstar Development Corporation.The VIDEOPlus+ system is
manufactured under licence from GemstarDevelopment
Corporation.

Emergency interrupt

You can use the STANDBY m button on the TV-VIDEO Combi or
the remote control to interrupt any function. Ifyou want to
interrupt a running Timer recording, hold the STANDBY m
button for several seconds.
So if you are having operating problems, you can justinterrupt
the function and start again.
And you can practise operating your set without anyworries.
No matter which buttons you press, you cannot damage it.

1

Special functions on your TV-VIDEO Combi

If a television programme, which transmitsTELETEXT, is stored with programme
number ’P01’, time and date will be set automatically.

When you have plugged your TV-VIDEO Combi into the mains,you will be
welcomed with an OSD picture. All you have to do isfollow the instructions in
the "intelligent help line" for the next step. Enjoythe Automatic TV channel
search/save function and the automatic time adjustment.

Automatic Volume Leveller. It minimises sudden changes in TV volume when
commercial spots are transmitted.

Philips has developed a system which produces thebest possible playback
quality. It reduces disturbance on old, worn videocassettes, and emphasises
the detail on very good quality cassettes.

Simple programming system for TV-VIDEO Combis.Makes programming as easy
as making a telephone call. Simply enter the programmecode which you will
find in your listings magazine.

We guarantee that your TV-VIDEO Combi will switchto the new millennium with
no problems whatsoever.

2

1. CONNECTING YOUR TV-VIDEO COMBI

Important for the United Kingdom

This machine is fitted with an approved moulded 13Amp plug.
To change a fuse in this type of plug, please followthese
instructions.

a Take off the fuse cover and take out the fuse.
b Put in a new fuse which should be a BS1362 5A, A.S.T.A.

or BSI approved type.

c Refit the fuse cover.

If the plug fitted is not suitable for yoursocket, cut it off and fit
another type.
If the plug you fit contains a fuse, it shouldbe a 5Amp fuse. If
you fit a plug which does not need a fuse, make surethe fuse
on your fuse box is not greater than 5 Amps.

DNote: Please destroy the plug you have cut off so that it

cannot be used in a 13 Amp socket somewhere else.

How to connect a plug

The wires in the lead from the video recorder are coloured as
follows.
* Blue - ’neutral’ (’N’).
* Brown - ’live’ (’L’).

d Connect the blue wire to the terminal in the plug which is

marked with the letter ’N’ or coloured black.

e Connect the brown wire to the terminal in the plug which

is marked with the letter ’L’ or colouredred.

Connecting the cables

a Insert the aerial plug into the 2 socket.
b Insert the plug of the mains cable into the wall socket.
c If the little red light at the front of the set isnot alight,

please switch on the set. The power switch 8 is
located on the left side panel of the set.

Connecting a decoder or other equipment

You can also connect additional equipment to the EXT.1
socket. For instance, a satellite receiver,decoder or
camcorder.

f Do not connect either of the wires to the terminal in the

plug which is marked with the letter ’E’, thesymbol \or
coloured green or green and yellow.

Before you refit the plug cover, make sure thatthe grip at the
bottom of the plug is clamped over the plastic coverof the
lead, not just over the two wires.

4

2. INSTALLING YOUR TV-VIDEO COMBI

Initial installation

a Open up the battery compartment of your remote control

and place the batteries in it as shown in the picture.

b Close the battery compartment.
c If you have connected the aerial to the TV-VIDEO Combi,

press the OK button.
’Automatic TV channel search’ starts. This picturewill
appear on the screen:

Searching...
CHANNELS FOUND:

Allocating a decoder

Some TV stations will send coded TV channels, that youcan
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. Withthe
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.

a Choose the TV channel on which you wish to use the

decoder with the P pAB button on the TV-VIDEO
Combi or the number buttons 0-9 on the remotecontrol.

b Press the MENU button on the remote control. The main

menu will appear.

c Select the line ’Installation’ with the P rB or

AP q buton and confirm with the SqC button.

d Select the line ’Manual store’with the P rB or

AP q button and confirm with the SqC button.

e Select the line ’Decoder’ with the P rB or

AP q button.

//////,,,,,,,,,,,,,,,,,,,,,

Wait until all TV channels have been found. This can take
several minutes.

DIf you have connected a decoder, you must install it

as described in the next section.

DIf you have connected a satellite receiver, please

read the section ’satellite receiver’.

MANUAL STORE

Channel/Frequency FREQU.

Search 125
Fine tuning (,,,,,,n=,,,,,,$
Name edit xxx
Programme number 01
Decoder OFF

ã Exit:
« press MENU

f Select function ’ON’ with the DSr or SqC

button. When you select ’OFF’, the function willbe
switched off.

g Confirm with the OK button.
h To end, press the MENU button.

Your decoder has now been allocated to this TV channel.

i Press the MENU button again.

5

Manual TV channel search

In certain cases the ’Automatic TV channel search’ maynot be
able to find all of the TV channels (e.g. coded TV channels).In
that case, use this manual method to set the channels.

a Press the MENU button on the remote control. The main

menu will appear.

b Select the line ’Installation’ with the P rB or

AP q button and confirm with the SqC button.

c Select the line ’Manual store’with the P rB or

AP q button and confirm with the SqC button.

i If you want to change the automatic tv channel setting,

select the line ’Fine tuning’.
With the DSr or SqC button you can vary the
automatic tv channel setting. Important: This re-tuning is
only necessary and useful in special cases, e.g.:when
there are stripes on the picture with cable-TV systems.

j Press the OK button to store the TV channel.

DIf you want to search for further TV channels, start

again at step e.

k To end, press the MENU button.

Satellite receiver

MANUAL STORE

Channel/Frequency FREQU.

Search 125
Fine tuning (,,,,,,n=,,,,,,$
Name edit xxx
Programme number 01
Decoder OFF

ã Exit:
« press MENU

d In the line ’Channel/Frequency’, selectthe

display for:

’FREQU.’: frequency
’CCH’: channel
’SCH’: special channel

e If you know the frequency or channel of the desired TV

channel, you can enter the data in line ’Search’with
the digit buttons 0-9 .

DIf you don’t know the frequency or channel of the TV

channel of your choice, press the SqC button to
start the channel search.

You can receive channels from the satellite receivervia the
scart socket EXT.1 .
To do this, select the channel number ’E1’ with the

P pAB button. You will have to select the channels to be

received by the satellite receiver on the receiveritself.

f In the line ’Programme number’ select the

programme number you want e.g.: ’01’, using the

DSr or SqC button.

g If you want to change the TV channel name, press the

SqC button in line ’Name edit’.

E Select the letter or number you want to change with the

DSr or SqC button. Change it with the

P rB or the AP q button. Select the next letter or

number in the same way.

h Press the OK button to store the changes you have

made.

6