Philips 14PV135 58 User Manual
This TV-Video Combi is used for the recording and playback of VHS videocassettes. Cassettes with the VHS-C label (VHS cassettes for camcorders) may only
be used with a suitable adapter.
We hope you enjoy your new TV-Video Combi.
EN
Thank you for buying a Philips TV-Video Combi.This TV-Video Combi is one of the most sophisticated and easy-to-use TV-Video Combis (TVCR) on the market. Please take the time to read this operating manual before using your TV-Video Combi. It contains important information and notes regarding
operation. The TV-Video Combi should not be turned on immediately after transportation from a
cold to a hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after
transporting the device. The TV-Video Combi needs this time in order to become acclimatised to its
new environment (temperature, air humidity, etc.).
TVCR
0VMN03924
HG474ED*****
PA L
Important notes regarding operation
Danger: High voltage!
There is a risk of an electrical shock!
To reduce the risk of fire or electric shock, do
not expose this device to rain or moisture.
The TV-Video Combi does not contain any
components that can be repaired by the
customer. Please leave all maintenance
work for qualified personnel.
As soon as the TV-Video Combi is connected to the power supply, some components
are in constant operation. To switch off the
TV-Video Combi completely you must disconnect it from the power supply.
Make sure that air can circulate freely
through the ventilation slots on the TV-Video
Combi. Do not place the device on an
unsteady base.
Make sure that no objects or liquids enter
the TV-Video Combi. Do not place vases or
the like on the TV-Video Combi. If liquid is
spilt into it, immediately disconnect the TVVideo Combi from the power supply and
call After-sales Service for advice.
Do not place any combustible objects on
the device (candles, etc.).
Make sure that children do not place any
foreign objects within the openings or ventilation slots.
These operating instructions have been
printed on non-polluting paper.
Deposit old batteries at the appropriate collection points.
Please make use of the facilities available in
your country for disposing of the packaging
of the TV-Video Combi in a way that helps
to protect the environment.
This electronic device contains many materials that can be recycled. Please enquire
about the possibilities for recycling your old
device.
So that you can identify your machine for service
questions or in the event of theft, enter the serial
number here. The serial number (PROD. NO.) is
printed on the type plate fixed at the back of the
device. Also, we suggest that you put a mark
with your TVCR MODEL NO..
This product complies with the requirements of
Directive 73/23/EEC +89/336/EEC +93/68 EEC.
MODEL NO. 14PV135/58 14PV235/58
21PV385/58
PROD. NO. ...........................
!
!
!
!
"
"
"
1
"
MODEL NO.:
14PV135/58, 14PV235/58
21PV385/58
T6460/550/552EZ(EN)_EST.qx3 04.1.28 4:15 PM Page 1
To record the TV channel selected at this moment or press repeatedly to start
a One-Touch Recording.
To switch off or on, interrupt menu function.
Press to select channels.
To select the switch-off time in 30 minutes intervals.
To change Video (colour) system.
To access or remove the TVCR’s on-screen status display. To exit on-
screen menus.
To delete last entry. To clear a programmed recording (TIMER). To reset the
elapsed time counter in the playback, recording or stop mode.
To stop the tape and play back a picture step by step. (except for during
fast forwarding and fast rewinding)
To call up main menu of TVCR.
When tape playback is stopped, press to fast forward the tape at high
speed. During playback, press to fast forward the tape while the picture stays on the
screen. To store or confirm entry in the menu. Press to adjust the controls of TVCR
menu.
When tape playback is stopped, press to rewind the tape at high speed.
During playback, press to rewind the tape while the picture stays on the screen.To return
the cursor in the menu. Press to adjust the controls of TVCR menu.
To play back a tape, select an item in the menu of TVCR.
To stop the tape, select an item in the menu of TVCR.
To adjust the volume.
To select the programme number. During playback, press to
adjust the tracking.
To eliminate the TV’s sound. Press again to restore the volume.
Red button / Green button / Yellow button/ Blue button / Doesn’t work on these
models.
[14PV235/21PV385]
:To switch Teletext on or off, or transparent mode
: Enlarge font
: Select Teletext sub-page
: Recall hidden information
: Stop page changes
: Go back to start page
MUTE
PROG P–PROG P
+
VOL5
–
VOL5
+
STOP
C- L
PLAY
B- K
REW
0- s
FWD
1- B
MENU
STILL
22
CLEAR
STATUS/EXIT
SYSTEM
SLEEP
0..9
STANDBY/ON
yy
REC I
2
EN
IN BRIEF
The remote control
T6460/550/552EZ(EN)_EST.qx3 04.1.28 4:15 PM Page 2
REC STANDBY/ON
1 2 3
4 5 6
7 8 9
SLEEP SYSTEM
0
PLAYSTATUS/EXIT CLEAR
REW FWD
MUTE
MENU
STOP
P
P
PROGVOL
STILL
P
p
l
o
o
l
p
o
l
p
p
l
o
STANDBY/ON: To s witch off or on, interrupt menu function.
Volume: In connection with the button to adjust the volume.
Programme number: To select the programme number. During playback, press to adjust the tracking.
To remove vertical jitter in a Still picture.
Record: To record the programme currently selected.
Playback: To play a recorded cassette.
Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then
ejected from the machine.
When tape playback is stopped, press to fast forward the tape at hight speed.
When tape playback is stoped, press to rewind the tape at hight speed.
Sockets on the front:
White socket / input socket: To connect a camcorder or video game machine (audio).
Yellow socket / input socket: To connect a camcorder or video game machine (video).
Small socket / socket for headphones: To connect headphones.
VIDEO
AUDIO
0
1
C
/
AA
B
I
P+
P-
–+
55
yy
3
EN
Front of your TVCR
Back of your TVCR
Aerial input socket: To connect the aerial cable.
Scart socket : To connect a satellite receiver, decoder, TV-Video Combi, etc
Power switch: To s witch the TV-Video Combi off.
Caution: If you switch off using the power switch, TIMER-recordings are impossible!
The control lights at the front of machine
STANDBY Standby light: lights up when the TV-Video Combi has been switched on by means of the main
switch.
RECORD Recording light: lights up during recording.
FAST blink: RECORDING PAUSE; TIMER RECORDING NOT STAND-BY.
SLOW blink: TIMER RECORDING is stored in a timer block.
EXT1/AV1
[14PV135/ 14PV235]
T6460/550/552EZ(EN)_EST.qx3 04.1.28 4:15 PM Page 3
VIDEO AUDIO
STANDBY/ON
P
EXT1/AV1
Preparing the remote control for
operation
The remote control and its batteries are packed
separately in the original TV-Video Combi packaging. You must install the batteries in the
remote control before use.
1.
1.Ta ke the remote control and the enclosed
batteries (2 batteries).
2.
2.Open the remote control’s battery compart-
ment and place the batteries in it as shown in
the picture and close the battery compart-
ment.
The remote control is now ready to use. Its
range is approximately 7 metres.
Connecting the cable
1.
1.Insert the aerial
cable plug into
the AERIAL at
the back of the
TV-Video Combi.
2.
2.
Connect the
mains cable to
the wall socket.
3.
3.If the little red standby light (STANDBY ) at
the front panel of the set is not lit, please
switch on the set using the main power
switch. The power switch is located on the
left side panel of the set.
4.
4.Language setting picture will appear on the
screen.
You can find more details in chapter ‘Preparation
for use’.
Connecting additional devices
You can connect additional devices such as
decoders, satellite
receivers, camcorders,
etc. to the EXT1/AV1
socket.
The respective scart socket is usually marked
‘AV’ or ‘TV’ on the decoder or satellite receiver.
EN
Specifications
Voltage: 220-240V/50Hz
Power consumption (Standby): less than 5W
Rewind time: less than 260 seconds
(cassette E-180)
Number of video heads: 2
Recording/playback time:
3 hours (SP) (cassette E-180)
6 hours (LP) (cassette E-180)
Power consumption: 52W
Dimensions in cm (HxWxD): 40.1x37.9x38.0
Weight without packing in kg: 10.5
Power consumption: 65W
Dimensions in cm (HxWxD): 51.2x51.0x49.5
Weight without packing in kg: 20.6
Supplied accessories
• Operating instructions
• Remote control and 2 batteries
21PV385
14PV135 14PV235
1. Connecting the TV-Video Combi
4
I do not see a Language setting picture
• Check the cable connections.
Selection of the scart socket
•
To select the Scart socket, please enter 0,0,1,
with the keys on the remote control. AV1
appears on the screen.
Selection of the front A/V sockets
•
To select the front A/V sockets, please enter
0,0,2, with the keys on the remote control.
‘AV2’ appears on the screen.
0..9
0..9
T6460/550/552EZ(EN)_EST.qx3 04.1.28 4:15 PM Page 4
PUSH MENU TO CONTINUE
Navigation in the screen menu
You can check/change many functions and settings of your TV-Video Combi via the on-screen
menu. The individual functions are selected, via
the remote control as follows:
Call up the menu: with .
To select: with or .
To enter or change your selection: with the
number buttons , or .
To save or confirm: with .
To cancel: with .
To end: with .
STATUS/EXIT
CLEAR
FWD 1- B
STOP C-LPLAY B-K
0..9
STOP C-LPLAY B-K
MENU
5
EN
2. Important notes for operation
Switching on
You can switch on the TV-Video Combi with
.
If you press , ,
,
, or
while the set is in Stand-by, the power will
be automatically turned on.
Note that the keys will be inactive for
about 5 seconds just after having switched the
TV-Video combi off.
Power outage/no power
Channel information remains saved for up to 1
year, the time and timer information is saved for
up to 1 minute.
0..9
0..9
REW0- sFWD 1- B
PROG P–PROG P+
STOP C-LPLAY B-K
STANDBY/ON
yy
SELECT KL CHOOSE B
→TIMER
PICTURE CONTROL
RECORD SET UP
VCR SET UP
TUNER SET UP
GENERAL SET UP
END=EXIT
Preparation for use
This chapter shows you how to prepare your TVVideo Combi for use. The TV-Video Combi automatically seeks out and stores all available TV
channels.
1.
1.Select the desired language for the on-screen
menu by pressing or .
2.
2.Press .
3.
3.Confirm with .
The automatic TV channel search starts.
4.
4.The clock setting display appears on the TV
screen.
5.
5.Set the time with the number buttons .
6.
6.Set ‘DAY’, ‘MONTH’ and ‘YEAR’ with the num-
ber buttons .
7.
7.When all information is correct, save by
pressing .
The preparation for use is now complete.
STATUS/EXIT
0..9
0..9
P+
MENU
STOP C-LPLAY B-K
PLEASE WAIT
START FINISH
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚
•
The TV-Video Combi searches the entire frequency range in order to find and save the
largest possible number of TV channels. It is
possible that the TV channels in your country
are broadcast in a higher frequency range. As
soon as this range is reached during the search,
the TV-Video Combi will find the TV channels.
3. Installing your TV-Video Combi
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
Satellite receiver
If you are connecting a satellite receiver, please
read the section ‘Using the satellite receiver’.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
The TV-Video Combi does not find any TV
channels during the search
• Check the cable connection of the aerial (aerial socket) and TV-Video Combi.
[14PV235/ 21PV385]
T6460/550/552EZ(EN)_EST.qx3 04.1.28 4:15 PM Page 5
Loading...