Philips 14PV120 07 User Manual
TVCR
MODEL NO.:
14PV120/07,14PV125/07,14PV225/07
14PV422/07,14PV425/07
Thank you for buying a Philips TV-Video combi.This TV-Video combi is one of the most sophisticated and easy-to-use TV-Video combi on the market.Please take the time to read this operating manual before using your TV-Video combi.It contains impor tant information and notes regarding operation.
The TV-Video combi should not be turned on immediately after transportation from a cold to a
hot area or vice versa, or in conditions of extreme humidity.Wait at least three hours after transporting the device.The TV-Video combi needs this time in order to become acclimatised to its new environment (temperature, air humidity, etc.).
This TV-Video combi is used for the recording and playback of VHS videocassettes.
Cassettes with the VHS-C label (VHS cassettes for camcorders) may only be used
with a suitable adapter.
PAL
We hope you enjoy your new TV-Video combi.
Important notes regarding operation
Danger: High voltage!
"
There is a risk of an electrical shock!
The TV-Video combi does not contain any
"
components that can be repaired by the
customer.Please leave all maintenance
work for qualified personnel.
As soon as the TV-Video combi is connect-
"
ed to the power supply, some components
are in constant operation.To-switch off the
TV-Video combi completely you must disconnect it from the mains or switch it off with
the main switch.
Make sure that air can circulate freely
!
through the ventilation slots on the TV-Video
combi. Do not place the device on an
unsteady base.
Make sure that no objects or liquids enter
!
the TV-Video combi. Do not place vases or
the like on the TV-Video combi.If liquid is
spilt into it, immediately disconnect the TVVideo combi from the power supply and call
After-sales Service for advice.
Do not place any combustible objects on the
!
device (candles, etc.).
Make sure that children do not place any
!
foreign objects within the openings or ventilation slots.
These operating instructions have been
printed on non-polluting paper.
Deposit old batteries at the appropriate collection points.
Please make use of the facilities available in
your country for disposing of the packaging
of the TV-Video combi in a way that helps to
protect the environment.
This electronic device contains many materials that can be recycled. Please enquire
about the possibilities for recycling your old
device.
So that you can identify your machine for service
questions or in the event of theft, enter the serial
number here.The serial number (PROD.NO.) is
printed on the type plate fixed at the back of the
device.
This product complies with the requirements of
Directive 73/23/EEC +89/336/EEC +93/68 EEC.
MODEL NO. : 14PV120/07, 14PV125/07
14PV225/07, 14PV422/07
14PV425/07
PROD. NO. ...........................
Interference
The Department of Trade and industry operates a
Radio lnvestigation Service to help TV licence holders improve reception of BBC and ITC programmes
where these are being spoilt by interference.
If your dealer cannot help, ask at a Main Post Office
for the booklet 'How to lmprove Television and Radio
Reception'.
IN BRIEF
o
l
p
o
l
p
The remote control
REC STANDBY/ON
1 2 3
4 5 6
7 8 9
SLEEP SYSTEM
0
PLAYSTATUS/EXIT CLEAR
REW FWD
MENU
STOP
P
P
PROGVOL
STILL
P
MUTE
p
l
o
o
l
p
CLEAR
To delete last entry/Clear programmed recording (TIMER).
REC I
To record the TV channel selected at this moment or press repeatedly to
start a One-Touch Recording.
22
STILL
To stop the tape and show a still picture.
+
PROG P–PROG P
To select the programme number.During normal or slow
motion playback, press to adjust the tracking or vertical jitter.
MUTE
To eliminate the sound. Press again to restore the volume.
+
VOL5
SYSTEM
SLEEP
STANDBY/ON
MENU
STATUS/EXIT
–
VOL5
To adjust the volume.
Doesn’t work on these models.
To select the switch-off time in 30 minutes intervals.
yy
To switch TVCR on or off, interrupt menu function.
To call up main menu of TVCR.
To access or remove the TVCR’s on-screen status display.To exit on-
screen menus.
0..9
Press to select channels.
FWD
When tape playback is stopped, press to fast forward the tape at hight
1- B
speed. During playback, press to fast forward the tape while the picture stay on the
screen.To store or confirm entry in the menu. Press to adjust the controls of TVCR
menu.
REW
When tape playback is stoped, press to rewind the tape at high speed.
0- s
During playback, press to rewind the tape while the picture stay on the screen.To return
the cursor in the menu. Press to adjust the controls of TVCR menu.
PLAY
STOP
To play a tape, select an item in the menu of TVCR.
B- K
C- L
To stop the tape, select an item in the menu of TVCR.
Red button / Green button / Yellow button/ Blue button / Doesn’t work on these
models.
<14PV225>
: To switch TELETEXT on or off, or transparent mode.
: enlarge font
: select TELETEXT sub-page
: recall hidden information
: stop page changes
: go back to start page.
EN
2
Front of the device
EXT/AV1
VIDEO AUDIO
STANDBY
Standby/on: To switch TVCR on or off, interrupt menu function.
yy
Volume:In connection with the button , to adjust the volume.
55
Programme number minus: previous programme number
P-
Programme number plus: next programme number
P+
I
Record: To record the programme currently selected.
B
Playback: To play a recorded cassette.
C
AA
/
Pause/Stop, eject cassette:To stop the tape; If this key is depressed while in STOP, the cassette is then
P
–+
ejected from the machine.
When tape playback is stopped, press to fast forward the tape at hight speed.
1
0
When tape playback is stoped, press to rewind the tape at hight speed.
Sockets on the front:
White socket / input socket: To connect a camcorder or video games (audio).
Yellow socket / input socket: To connect a camcorder or video games (video).
AUDIO
VIDEO
Small socket / socket for headphones: To connect headphones.
Back of the set
Aerial input socket: To connect the aerial cable
EXT1/AV1
Scart socket :To connect a satellite receiver, decoder, video recorder, etc
Power switch: To switch the TV-Video Combi off.
Caution: If you switch off using the power switch, TIMER-recordings are impossible!
The control lights at the front of machine
STANDBY Standby light:lights up when the TV-Video Combi has been switched on by means of the main
switch.
RECORD Recording light:lights up during recording.
Fast blink:recording pause, timer recording not stand-by.
Slow blink: timer recording is stored in a timer block.
3
EN
Specifications
Voltage: 220-240V/50Hz
Power consumption (Standby): less than 5W
Rewind time: less than 260 seconds (cassette E-180)
Number of video heads : 2
Recording/playback time: 3 hours (SP)
(cassette E-180), 6 hours (LP) (cassette E-180)
Weight without packing in kg: 11.5
Dimensions in cm (HxWxD):40.0x37.3x38.0
Power consumption : 52W
Supplied accessories
• Operating instructions
• Remote control and batteries
1. Connecting the TV-Video Combi
Important for the United Kingdom
This apparatus is fitted with an approved 5 Amp
plug.To change a fuse in this type of plug proceed as follows:
1.Remove fuse cover and fuse.
1.
2.Fix new fuse which should be a BS1362
2.
5A,ASTA or BSI approved type.
3.Refit the fuse cover.
3.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5A.If a plug without a fuse is
used, the fuse at the distribution board should not
be greater than 5A.
The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A
socket elsewhere.
How to connect a plug:
The wires in the mains lead are coloured in accordance with the following code:
BLUE- 'NEUTRAL' ('N')
BROWN- 'LIVE' ('L')
4.The BLUE wire must be connected to the termi-
4.
nal which is marked with the letter 'N' or
coloured BLACK.
5.The BROWN wire must be connected to the
5.
terminal which is marked with the letter 'L' or
coloured RED.
6.Do not connect either wires to the earth termi-
6.
nai in the plug which is marked with the letter
'E' or by the safety earth symbol or coloured
green or green-and-yellow.
Before replacing the plug cover, make certain that
the cord grip is clamped over the sheath of the
lead-not imply over the two wires.
Preparing the remote control for
operation
The remote control and its batteries are packed
separately in the original TV-Video Combi packaging.You must install the batteries in the
remote control before use.
1.Take the remote control and the enclosed bat-
1.
teries (2 batteries).
2.Open the remote control's battery compart-
2.
ment and place the batteries in it as shown in
the picture and close the battery compartment.
The remote control is now ready to use.
Its range is approximately 7 metres.
Connecting the cable
1.Insert the aerial cable plug into the AERIAL at
1.
the back of the TV-Video Combi.
2.Connect the mains cable to the wall socket.
2.
3.If the little red standby light (STANDBY ) at
3.
the front panel of the set is not lit, please
switch on the set using the main power
switch.The power switch is located on the
left side panel of the set.
EN
4
4.The following screen will appear on the TV.
4.
PLEASE CONNECT AERIAL OR
CABLE TO THE TVCR
THEN...
KEY
PUSH P+
OR...
FOR PLAY ONLY PUSH PLAY
Connecting additional devices
You can connect additional devices such as
decoders, satellite receivers, camcorders, etc.to
the EXT1 socket.
You can find more details in chapter
'Preparation for use'.
The respective scart socket is usually marked
'AV'
or 'TV'on the decoder or satellite receiver.
2. Important notes for operation
Switching on
You can switch on the TV-Video Combi with
STANDBY/ON
If you press , ,
PROG P–
yy
.
STOP C-LPLAYB-K
REW0- sFWD 1- B
,
, or while
PROG P+
0..9
,
the set is in Stand-by, the power will be automatically turned on.
Note that the keys will be inactive for
0..9
about 5 seconds just after having switched the
TV-Video combi off.
Power outage/no power
Channel information remains saved for up to 10
year, the time and timer information is saved for
up to 1 minute.
Navigation in the screen menu
You can check/change many functions and settings of your TV-Video Combi via on-screen
menu.The individual functions are selected, via
the remote control as follows:
0..9
CLEAR
MENU
STOP C-LPLAYB-K
STOP C-LPLAYB-K
FWD 1- B
Call up the menu: with .
To select: with .
To enter or change your selection: with the
number buttons or with .
To save or confirm: with .
To cancel: with .
To end: with .
STATUS/EXIT
SELECT KL CHOOSE B
→TIMER
PICTURE CONTROL
RECORD SET UP
VCR SET UP
TUNER SET UP
GENERAL SET UP
END=EXIT
5
EN
Loading...