Philips 14PV112-07 User Manual
Thank you for buying a Philips TV-Video combi.
This TV-Video combi is one of the most sophisticated and easy-to-use TV-Video combi on the
market. Please take the time to read this operating manual before using your TV-Video combi. It
contains important information and notes regarding operation. The TV-Video combi should not
be turned on immediately after transportation from a cold to a hot area or vice versa, or
in conditions of extreme humidity. Wait at least
three hours after transporting the device. The
TV-Video combi needs this time in order to
become acclimatised to its new environment
(temperature, air humidity, etc.).
This TV-Video combi is used for the recording and
playback of VHS videocassettes. Cassettes with
the VHS-C label (VHS cassettes for camcorders)
may only be used with a suitable adapter.
We hope you enjoy your new TV-Video combi.
Important notes regarding operation
Danger: High voltage!
There is a risk of an electrical shock!
The TV-Video combi does not contain any
components that can be repaired by the
customer. Please leave all maintenance
work for qualified personnel.
As soon as the TV-Video combi is connected to the power supply, some components
are in constant operation. To-switch off the
TV-Video combi completely you must disconnect it from the mains or switch it off
with the main switch.
Make sure that air can circulate freely
through the ventilation slots on the TVVideo combi. Do not place the device on an
unsteady base.
Make sure that no objects or liquids enter
the TV-Video combi. Do not place vases or
the like on the TV-Video combi. If liquid is
spilt into it, immediately disconnect the TVVideo combi from the power supply and call
After-sales Service for advice.
Do not place any combustible objects on
the device (candles, etc.).
Make sure that children do not place any
foreign objects within the openings or ventilation slots.
These operating instructions have been
printed on non-polluting paper.
Deposit old batteries at the appropriate collection points.
Please make use of the facilities available
in your country for disposing of the packaging of the TV-Video combi in a way that
helps to protect the environment.
This electronic device contains many materials
that can be recycled. Please enquire about the
possibilities for recycling your old device.
So that you can identify your machine for service
questions or in the event of theft, enter the serial number here. The serial number (PROD.NO.) is printed on
the type plate fixed at the back of the device.
This product complies with the requirements of
Directive 73/23/EEC +89/336/EEC +93/68 EEC.
Interference
The Department of Trade and industry operates a
Radio lnvestigation Service to help TV licence holders improve reception of BBC and ITC programmes
where these are being spoilt by interference.
If your dealer cannot help, ask at a Main Post
Office for the booklet 'How to lmprove Television
and Radio Reception'.
Specifications
Voltage: 230-240V/50Hz
Power consumption : 52W
Power consumption (Standby): less than 4W
Rewind time:
less than 240 seconds (cassette E-180)
Weight without packing in kg: 11.5
Dimensions in cm (HxWxD):40.0x37.3x38.0
Number of video heads : 2
Recording/playback time: 3 hours (SP)
(cassette E-180)
6 hours (LP) (cassette E-180)
Supplied accessories
• Operating instructions
• Remote control and batteries
PAL
MODEL NO.:14PV111/07, 14PV112/07, 14PV415/07
14PV203/07, 14PV460/07
PROD. NO.
...........................
!
"
"
"
!
!
!
TVCR
14PV111/07 14PV112/07
14PV415/07 14PV203/07 14PV460/07
EN
2
BRIEF
The remote control
To eject the cassette.
To delete last entry/Clear programmed recording (TIMER).
To record the TV channel selected at this moment or press
repeatedly to start a One-Touch Recording.
To stop the tape and show a still picture.
To select the programme number. During normal or slow motion playback,
press to adjust the tracking or vertical jitter.
To eliminate the sound. Press again to restore the volume.
To adjust the volume.
Doesn’t work in these models.
To select the switch-off time in 30 minutes intervals.
To switch TVCR On or Off or to interrupt menu function.
To call up main menu of TVCR.
To access or remove the TVCR’s on-screen status display. To exit
on-screen menus.
Press to select channels.
When tape playback is stopped, press to fast forward the tape at hight
speed. During playback, press to fast forward the tape while the picture stay on the
screen. To store or confirm entry in the menu. Press to adjust the controls of TVCR
menu.
When tape playback is stopped, press to rewind the tape at high speed.
During playback, press to rewind the tape while the picture stay on the screen.To
return the cursor in the menu. Press to adjust the controls of TVCR menu.
To play a tape, select an item in the menu of TVCR.
To stop the tape, select an item in the menu of TVCR.
<14PV203/07, 14PV460/07>
To switch TELETEXT on or off,or transparent mode.
: enlarge font
: switch TELETEXT decoder off temporarily
: Doesn’t work in these models.
:
recall hidden information
: stop page changes
: go back to start page.
Yellow button/ Select TELETEXT function when you are in TELETEXT mode.
TEXT
LC
KB
s0
B1
0..9
STATUS/EXIT
MENU
STANDBY/ON
yy
SLEEP
SYSTEM
5L5K
MUTE
P-P+
STILL
RECORD/OTR I
CLEAR
EJECT
AA
EJECT
STANDBY/ON
MENU STATUS/EXIT CLEAR
1 2 3
4 5 6
7 809
SLEEP
RECORD/OTR
P+
SYSTEM
STILL
MUTE
P-
TEXT
?
o
l
p
p
l
o
o
l
p
p
l
o
3
EN
Front of the device
Power switch: To s witch the TV-Video Combi off.
Caution: If you switch off using the power switch, TIMER-recordings are impossible!
Standby/on: To s witch TVCR On or Off or to interrupt a menu function.
Volume: In connection with the button , to adjust the volume.
Programme number minus: previous programme number
Programme number plus: next programme number
Record: To record the programme currently selected.
Playback: To play a recorded cassette.
Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then
ejected from the machine.
When tape playback is stopped, press to fast forward the tape at high speed.
When tape playback is stopped, press to rewind the tape at high speed.
Sockets on the front:
White socket / input socket: To connect a camcorder or video games (audio).
Yellow socket / input socket: To connect a camcorder or video games (video).
Small socket / socket for headphones: To connect headphones.
VIDEO
AUDIO
0
1
C
/
AA
B
I
P+
P-
–+
55
yy
Back of the set
Aerial input socket: To connect the aerial cable.
Scart socket :To connect a satellite receiver, decoder, video recorder, etc.
The control lights at the front of machine
STANDBY Standby LED: lights up when the TV-Video Combi has been switched On by means of the main
switch.
RECORD Recording LED: lights up during recording.
Fast blink: RECORDING PAUSE;TIMER RECORDING NOT STAND-BY.
Slow blink: TIMER RECORDING is stored in a timer block.
EXT1/AV1
STANDBY
EN
4
Important for the United Kingdom
This apparatus is fitted with an approved 5 Amp plug.
To change a fuse in this type of plug proceed as follows:
1.
1.Remove fuse cover and fuse.
2.
2.Fix new fuse which should be a BS1362
5A,ASTA or BSI approved type.
3.
3.Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5A. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5A.
How to connect a plug:
The wires in the mains lead are coloured in
accordance with the following code:
BLUE- 'NEUTRAL' ('N')
BROWN- 'LIVE' ('L')
4.
4.The BLUE wire must be connected to the ter-
minal which is marked with the letter 'N' or
coloured BLACK.
5.
5.The BROWN wire must be connected to the
terminal which is marked with the letter 'L' or
coloured RED.
6.
6.Do not connect either wires to the earth ter-
minal in the plug which is marked with the
letter 'E' or by the safety earth symbol or
coloured green or green-and-yellow.
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath of
the lead-not imply over the two wires.
Preparing the remote control for
operation
The remote control and its batteries are packed separately in the original TV-Video Combi packaging.You
must install the batteries in the remote control before
use.
1.
1.Ta ke the remote control and the enclosed
batteries (2 batteries).
2.
2.Open the remote control's battery compart-
ment and place the batteries in it as shown in
the picture and close the battery compart-
ment.
The remote control is now ready to use.
Its range is approximately 7 metres.
Connecting the cable
1.
1.Insert the aerial cable plug into the AERIAL
at the back of the TV-Video Combi.
2.
2.Connect the mains cable to the wall socket.
3.
3.If the little red standby light (STANDBY ) at
the front panel of the set is not lit, please
switch on the set using the main power
switch. The power switch is located on the
left side panel of the set.
This text will appear on the TV screen.
You can find more details in chapter 'Preparation
for use'.
Connecting additional devices
You can connect additional devices such as
decoders, satellite receivers, camcorders, etc. to
the EXT1 socket..
The respective scart socket is usually marked
'AV'
or 'TV'on the decoder or satellite receiver.
The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a
13A socket elsewhere.
1. Connecting the TV-Video Combi
PLEASE CONNECT AERIAL OR
CABLE TO THE TVCR
THEN...
PUSH P+
KEY
OR...
FOR PLAY ONLY PUSH PLAY
<14PV203/07, 14PV460/07>
3.
3.'TIME' and 'DATE' will appear on the TV
screen.
4.
4.Check 'TIME'. If required, please change the
time with the number buttons .
5.
5.Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
6.
6.When all information is correct, save by
pressing .
The preparation for use is now complete.
STATUS/EXIT
0..9
5
EN
2. Important notes for operation
Navigation in the screen menu
You can check/change many functions and settings of your TV-Video Combi via on-screen
menu. The individual functions are selected, via
the remote control as follows:
Call up the menu: with .
To select: with .
To enter or change your selection: with the
number buttons or with .
To save or confirm: with .
To cancel: with .
To end: with .
STATUS/EXIT
CLEAR
B1
LCKB
0..9
LCKB
MENU
Switching on
You can switch TV-Video Combi on with
.
Power outage/no power
Channel information remains saved for up to 10
year, the time and timer information is saved for
up to 1 minute.
STANDBY/ON
yy
SELECT KL CHOOSE B
→TIMER
PICTURE CONTROL
RECORD SET UP
VCR SET UP
TUNER SET UP
GENERAL SET UP
END=EXIT
3. Installing your TV-Video Combi
Preparation for use
1.
1.After you have connected the aerial or cable,
confirm the picture on the TV screen with
.
2.
2.The automatic TV channel search starts.
This picture will appear on the screen.
When automatic TV channel search is complete,'AUTO TUNING COMPLETE' will
appear on the TV screen.
B1
PLEASE WAIT
START FINISH
❚❚❚❚❚❚❚❚❚❚❚
❚❚❚❚❚❚❚❚❚❚❚❚
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
Loading...