Philio Technology PSC02 User Manual

Philio-Tech corporation
User Manual

PSC01 Gateway Series
PSC02 Gateway Series

3. Connect to the the internet.

•

Go to Settings -> Wi-Fi, choose your own
Wi-Fi SSID, and connect it.

•

Once you connect to Wi-Fi, open the
app.

4. Go to Settings -> Gateway Address -> UID, and press QR Code.

•

Use the camera of your mobile device to scan the QR Code to
set up the gateway address.

5. Add your devices

•

In the Sensor page, press Blue Gear -> Include Device to
add Z-wave devices. (Remember to activate the include
mode of your device by flipping three times the trigger
on it.)