Philio Technology PAN27 User Manual
PAN27
Smart Home DIN Rail box
Note: The power cord must meet 1.25mm² or 16AWG or better
This Smart home din rail mounted box with dongles is “simply fabulous”
Smart home DIN rail box looks ok, but it’s really one lean mean machine
boasting 8 output slots that can control just about anything with plug n’
play dongles. The 8 outputs correspond to 8 inputs, so the unit can be
used from the start without programming. Four additional inputs can be
used to run scenarios without the app, and the input method can also be
easily changed from push button to switch.
• On/Off
• Dimm e r
• Dry co n t act
Compatible with just about anything
By default Smart home din rail box communicates via RJ11 or RJ45 (WiFi). By simply
adding a dongle to one of the two USB ports, the box supports Z-Wave and ZigBee.
(
Note: For FCC ID: RHHPAN27, it supports WLAN 2.4G mode only without Z-Wave and
Zigbee function.)
compatibility with just about any system or device from any manufacturer.
A one-time installation of the all-in-one box ensures support and
Safety Precautions and Installation
• Disconnect from supply before removing
• Avoid installing the unit in storming or raining weather.
• Be sure to isolate or switch off power source before installing or
maintenance.
• Do ensure that the power supply circuit protected by a 16A circuit breaker or
suitable equivalent fuse.
• Make sure to protect each external power circuit 5A (relay dongle) by using
either circuit breaker or equivalent suitable fuse.
IMPORTANT
• Installation and any maintenance must be performed by skilled technicians
• Check your local codes as they apply to your situation. If the house wiring is
Before proceeding with the installation, TURN OFF THE POWER TO THE LIGHTING
CIRCUIT AT THE CIRCUIT BREAKER OR FUSE BOX TO AVOID ELECTRICAL
SHOCK.
Security
Before making any connections, please read these instructions carefully.
Never remove the plastic base from DIN rail.
Do not touch live parts. High voltages present in module.
To access the interior of this equipment must first be disconnected from the mains.
who are informed about the standards and technical requirements of the appliance and its proper installation. Installing or changing dongle shall also be
performed by skilled technicians. Disconnect from supply before any maintenance or serving. The accessible parts to user is LED display plate after installation.
of aluminum, consult with an electrician about proper wiring methods.
Connect to the internet.
• Go to Settings, Wi-Fi, choose your own Wi-Fi SSID, and connect it.
• Once you connect to Wi-Fi, open the app
1
• Add UID: Can enter 10.10.10.254 or press Search or press QR Code to scan
the QR Code to set up the gateway address.
•Name: arbitrary input
• ID: admin
• Password: 888888
Add your devices
Add IP Cam
• In the Divice page, press Plus Gear Add IP Cam QR Code to add
IP Cam by scanning the QR Code with camera.
Add a room
• Press Add new Room in the Device page to add a new room, enter the name of
• In the Device page, press Plus Gear Include Device to add Z-wave or ZigBee
devices. (Remember to activate the include mode of your device by
flipping three times the trigger on it.)
the room as you like.
2
Scene
• Scene can set the room ambiance quickly. It can help you to have a
better experience at the special
moment.
Macro
Still worry about your flat security?
Macro is just like your 24-7 personal home guard.
It secures your flat. Just set the reactive you wishes, it obeys your orders faithfully.
Overview
Front view
Side view
Internal view
3
A. Reset
B. AC Power input
D. RJ45 Ethernet port
E. RJ 22 port
F. Learn Key
Loading...