Pfister R89-7DFC User Manual [en, es, fr]

R89 Series

Serie R89 Série R89

Tub & Shower • Shower Only

Trim Kit

Juego con acabado para

Tinas y duchas o ● duchas solamente

Bain et douche ● Douche seule

Kit de garniture

Lifetime Limited Mechanical & Pnish Warranty

Price Pster

Covers Pnish and Pfunction for as Long as You

Own Your Home

(Commercial Applications Limit the Duration of the

Warranties as Provided Below)

Price Pster provides the following Warranties for its products. Proof of Purchase may be required in order to obtain any of the benets set forth below.

Limited Warranties: Price Pster warrants that for as long as the original purchaser owns the home in which the Price Pster product (the “Product”) is originally installed, the Product will be free of all defects in material and workmanship that would impair the intended and proper use of the Product. If the Product is installed in a commercial application, the above mechanical warranty shall be limited for a period of ten (10) years from the date of purchase of the Product.

Price Pster warrants against deterioration of the Product’s nish for as long as the original purchaser owns the home in which the Product is originally installed. If the Product is installed in a commercial application, the above nish warranty for Products that do not contain the Pforever nish shall be limited to a period of ve (5) years from the date of purchase.

Exclusive Remedy: In the event of any defect in the Product that breaches the foregoing warranties, Price Pster, at its option, will repair or replace the defective part of the Product. Repair or replacement of the Product is the exclusive remedy.

For any remedy under this warranty, Price Pster is to be notied describing the problem. In order to notify Price Pster and receive assistance or service under this warranty, the original purchaser may: (1) call 1-800-Pfaucet (1-800-732-8238) for a consumer service representative who can assist you, or (2) write consumer service department c/o Price Pster Inc., 19701 DaVinci, Lake Forest, CA 92610, and include a description of the problem, model number, your name, address, phone number and approximate date of purchase, or (3) email Price Pster’s customer service department by going to www.PricePster.com, or (4) notify the location or distributor from which the Product was purchased. In any case, you may be required to return the Product to Price Pster for inspection and proof of purchase may be required.

Limitations and Exclusions: PRICE PFISTER WILL NOT BE LIABLE FOR ANY OTHER DAMAGES OR LOSSES, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL AND/OR CONSEQUENTIAL DAMAGES, REGARDLESS OF THE LEGAL THEORY ASSERTED, INCLUDING ANY CLAIM OR BREACH OF WARRA NTY HEREUND ER OR ANY OTHER CAUSE, AND WHETHER ARISING IN CONTRACT OR IN TORT (including negligence and strict liability).

Price Pster has the right to discontinue or modify any product at any time. Some states do not allow limitations or exclusions of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.

The above warranties do not cover damage resulting from improper maintenance, repair, cleaning or installation, misuse, abuse, alterations, accidents or acts of God.

05-09-08 EO7249C

Garantía Mecánica y sobre el Acabado Limitada de por Vida

Price Pster

Cubre las funciones y el acabado por el tiempo en que usted sea

propietario de su casa

(Las Aplicaciones Comerciales Limitan la Duración

de las Garantías)

Price Pster suministra las siguientes Garantías para sus productos. Es posible que se requiera la presentación de una Prueba de compra para obtener cualquiera de los benecios indicados a continuación.

Garantías Limitadas: Price Pster garantiza que por el tiempo en que el comprador original sea propietario de la casa en el que se hubiese instalado inicialmente el producto Price Pster (el “Producto”), este Producto estará libre de todo defecto en material y mano de obra que pueda afectar el uso proyectado y correcto del Producto. Si el Producto se instala en una aplicación comercial, la garantía mecánica que antecede estará limitada a un período de diez (10) años a partir de la fecha de compra del Producto.

Price Pster garantiza el acabado del Producto contra deterioro por el tiempo en que el comprador original sea propietario de la casa en la que hubiese instalado inicialmente el Producto. Si el Producto se instala en una aplicación comercial, la garantía sobre el acabado que precede para Productos que no contengan el acabado “Pforever” estará limitada a un periodo de cinco (5) años a partir de la fecha de compra.

Recurso exclusivo: En el caso de que haya un defecto en el Producto que viole las garantías que preceden, Price Pster, a su opción, reparará o reemplazará la pieza defectuosa del Producto. La reparación o el reemplazo del Producto es el recurso exclusivo.

Para todo recurso con respecto a esta garantía, Price Pster deberá ser noticado, con una descripción del problema. Para noticar a Price Pster y recibir ayuda o servicio bajo esta garantía, el comprador original puede: (1) llamar al 1-800-Pfaucet (1-800-732-8238) para hablar con un representante de servicio al cliente que lo pueda ayudar, o (2) escribir al departamento de servicio al consumidor, c/o Price Pster Inc., 19701 DaVinci, Lake Forest, CA 92610 U.S.A., e incluir una descripción del problema, el número del modelo, su nombre, dirección, número de teléfono y fecha aproximada de compra, o (3) enviar un e-mail al departamento de servicio al consumidor de Price Pster entrando en la página web www.PricePster.com, o (4) avisarle al lugar o al distribuidor en donde se compró el Producto. En cualesquiera de los casos, podría pedírsele devolver el Producto a Price Pster para su inspección y es posible que se requiera la presentación de una prueba de compra.

Limitaciones y Exclusiones: PRICE PFISTER NO SE HARÁ RESPONSABLE DE NINGÚN OTRO DAÑO O PERJUICIO, INCLUYENDO, PERO SIN ESTAR LIMITADO A DAÑOS INCIDENTALES Y/O CONSECUENTES, SIN IMPORTAR LA TEORÍA LEGAL A LA QUE SE ALEGUE, INCLUYENDO TODO RECLAMO O VIOLACIÓN DE LA GARANTÍA PRESENTE O CUALQUIER OTRA CAUSA, Y YA SEAN COMO RESULTADO DE LA LEY CONTRACTUAL O LA DE ANTECEDENTES (incluyendo negligencia y responsabilidad estricta).

Price Pster tiene el derecho de discontinuar o modicar cualquier producto en cualquier momento. Ciertos estados no permiten limitaciones o exclusiones de daños incidentales o consecuentes, de manera que es posible que las limitaciones o exclusiones que preceden no correspondan en su caso. Esta garantía le otorga derechos legales especícos y es posible que usted también tenga otros derechos que dieren entre un estado y otro.

Las garantías que preceden no cubren daños y perjuicios ocasionados como resultado de mantenimiento, reparaciones, limpieza o instalación inadecuados, mal uso, abuso, alteraciones, accidentes o causas de fuerza mayor.

Price Pster

Une garantie limitée à vie

pour ce qui est de l’aspect mécanique et de la nition,

tant et aussi longtemps que vous serez propriétaire

de votre domicile.

(Garantie limitée en cas d’utilisation commerciale

– voir ci-dessous)

Veuillez noter qu’une preuve d’achat peut être requise en cas de recours au titre de la garantie.

Garantie limitée : Tant et aussi longtemps que l’acheteur sera propriétaire du domicile dans lequel le produit Price Pster a été installé, nous lui garantissons que ce dernier sera exempt de tout défaut de matériau ou vice de fabrication pouvant en entraver l’utilisation correcte tel que prévu. Dans le cas des produits d’utilisation commerciale, la garantie exprimée ci-dessus est restreinte à une période de dix (10) ans.

Par ailleurs, tant et aussi longtemps que l’acheteur sera propriétaire du domicile dans lequel le produit Price Pster a été installé, nous lui garantissons un article dont la nition ne pourra se détériorer. Dans le cas des produits d’utilisation commerciale qui ne comportent pas la nition “Pforever”, la garantie est restreinte à une période de cinq (5) ans.

Recours exclusif : En cas de défaut du produit relevant de la garantie, le fabricant pourra, à sa discrétion, réparer ou remplacer la partie défectueuse. Cette mesure constitue un recours exclusif.

Pour tout recours au titre de la garantie, les clients doivent communiquer avec le fabricant pour lui faire part du problème. L’acheteur d’origine peut : (1) composer le 1 800 732-8238 pour parler à un représentant qui l’assistera; (2) écrire au service à la clientèle : Price Pster Inc., 19701 DaVinci, Lake Forest, CA 92610 U.S.A., et fournir une explication du problème, en précisant le numéro de modèle, son nom, son adresse et son numéro de téléphone, ainsi que la date d’achat approximative; (3) communiquer par courrier électronique avec le service à la clientèle en utilisant le site www.PricePster.com, ou (4) aviser le détaillant qui a vendu le produit. On peut être obligé de retourner le produit au fabricant, et une preuve d’achat peut être exigée.

Limitations et exclusions : PRICE PFISTER NE SERA PAS RESPONSABLE DES AUTRES DOMMAGES OU PERTES, Y COMPRIS LES DOMMAG ES IN DIREC TS, IN DÉPEN DAMME NT DE TO UTE THÉO RIE JURID IQUE, Y COMPRIS TOUTE RÉCLAM ATIO N SELON LAQUELLE IL Y AURAIT EU RUPTURE DE GARANTIE, QUE CE SOIT PAR RAPPORT À UN CONTRAT OU PAR VOIE DE NÉGLIGENCE (cela comprend la négligence et la responsabilité stricte).

Price Pster se réserve le droit de discontinuer ou de modier un produit en tout temps. Certaines provinces ne permettent pas l’exclusion ou la limitation des dommages indirects, de sorte que la limitation exprimée peut ne pas s’appliquer. La présente garantie octroie aux clients certains droits d’ordre juridique, et ceux-ci pourraient en avoir d’autres, selon la province où ils habitent.

La garantie ne s’applique pas aux dommages résultant d’un entretien, d’un nettoyage ou d’une installation fautivement effectués, ou encore d’usages fautifs, d'abus, de modications, d'accidents ou de catastrophes naturelles.

33581-0100

A COMPANY

ENGLISH

Thank you for purchasing this Price Pster product. All Price Pster products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Re ad a ll t he in st ruc ti ons co mple te ly b efo re pro ce edi ng . Pr ic e P st er

recommends calling a professional if you are uncertain about installing this product! This product should be installed in accordance with all local and state plumbing and building codes.

ENGLISH

WARNING: This product has been designed for use with the Price Pster 0X8

series pressure balancing valve. It will not work with any other product.Please review the 0X8 valve installation instructions before installing this product

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are usually found near the water meter. If you are replacing an existing unit, remove the old unit and clean the mounting surface thoroughly.

30”

Tub & Shower

INSTALLATION STEPS

1 1/4” Dia.

4 3/4” Dia.

4” Dia. for Thin

Wall Installation

48”

Shower Only

1 1/4” Dia.

48”

Tub & Shower

8” Min.

30”

Shower Only

3 TOOLS RECOMMENDED

• PTFE plumber's tape or thread sealant

• Philips head screwdriver • Adjustable wrench • Pipe wrench • Flashlight

• Cloth

Your installation will require a pipe nipple for the spout installation as well as other additional tools.

5 WORK AREA INSPECTION

Verify that the hole sizes and positions in the wall are correct.

4 CHECKING THE CONTENTS OF THE BOX

Upon opening the box, check to ensure that all of the following items are included.

A Gasket & Trim Flange B Washer C Retainer Sleeve D Stem Extension E Handle F Set Screw G Hex Wrench H Diverter Spout J Shower Arm K Shower Head L Shower Flange M Spout Flange N Internal Connector

If any of these items are missing, please contact Price Pster Consumer Service at

1-800-Pfaucet (1-800-732-8238).

6 PLASTERGUARD OPTIONS

For installation using plasterguard, knock out Center Section (6B) from Plasterguard

(6A). The use of plasteguard is optional for standard installations.

B. For installation without plasterguard, remove Screws (6C), and Plasterguard (6A).

ENGLISH

7 TRIM FLANGE ATTACHMENT

Position Flange (7A) on Valve (7B) with Drain Hole (7C) at the bottom. Place Protective Washer (7D) on the short end of the reversible Retainer Sleeve (7E ). Screw Retainer Sleeve (7E) onto threaded section of the Stem and Bonnet (7G). Tighten Retainer Sleeve (7E) by hand until Flange (7A) is snug to nished wall surface. If the short end of the Retainer Sleeve (7E) is too short, reverse it to use the longer end.

9 SHOWER ARM INSTALLATION

Insert the short end of Shower Arm (9A) through the Shower Flange (9B). Apply PTFE plumber's tape to both ends of Shower Arm (9A) according to manufacturer's instructions. Screw the end of Shower Arm (9A) into pipe elbow inside the wall. Slide Shower Flange (9B) tight to the wall.

10C

10D

10B

10A

10C

10E

10F

/4”

/8”

to 3

/8”

”

to 4

8 HANDLE ATTACHMENT

Screw Stem Extender (8A) onto the Valve Stem (8B). Thread the Set Screw (8C) into the Handle (8D) and thread it in only three to four turns. Place Handle (8D) onto the Stem Extender (8A) and tighten the Set Screw (8C) by using the Hex Wrench (8E) that is provided.

Make sure Set Screw (8C) is securely tightened to handle

(8D)

10G

10D

10 SPOUT INSTALLATION

A. For Copper Pipe Connections:

Connect Copper Nipple (10A) (not included) into the elbow inside the wall and remove the sharp edges all around the outer tube (10B). The Copper Nipple (10A) is to project 3 1/4” to 3 3/8” from the nished wall. Press Tub Flange (10C) and Tub Spout (10D)

onto Copper Nipple (10A) until spout is properly positioned and ush to the nished wall

surface. Tighten Screw (10E) located at the bottom of spout.

B. For Threaded Iron Pipe Connections:

Ap pl y PT FE plu mb er s ta pe o n b oth en ds o f Pi pe Nip pl e (10F) ( not in clu de d). Sc rew Pip e Nipple (10F) into the elbow inside the wall and tighten with pipe wrench. The Pipe Nipple

(10F) is to project 3 7/8” to 4” from the nished wall. Remove Internal Connector (10G) from Spout (10D). Press Tub Flange (10C) and screw Tub Spout (10D) onto Pipe Nipple (10F) and tighten until Spout is properly positioned and ush to the nished wall.

11 UNIT START UP

Turn on hot and cold water supplies, and check all connections for leaks.

ENGLISH

FULL HOT

12A

CLOSED

12 VALVE FUNCTION

By rotating the Lever Handle (12A) slightly counterclockwise, the valve will be fully

ac ti vat ed to t he “CO LD ” p osi ti on. Th e wa te r te mpe ra tu re c an be i nc rea se d by co nti nu ing

to rotate the Lever Handle (12A) in a counterclockwise direction.

For

Shower

OPEN

FULL COLD

13A

13B

15B

15A

15 SHOWER HEAD INSTALLATION

Thread Shower Head (15A) onto Shower Arm (15B).

13 TUB SPOUT FUNCTION

When the valve is turned on, water normaly ows through the Tub Spout (13A). To activate the shower, turn valve on and pull the Knob (13B) up. Hold on until water ows continiously from the shower arm.

14C

14B

14A

14 FINAL FLUSHING

For nal ushing, turn valve on and allow water to run through the Tub Spout (14A) for se ver al min ut es. Pu ll S po ut K no b (14B) u p t o al low wa ter to r un thr ou gh S ho wer Ar m (14C ).

Allow water to run for several minutes untill all foreign mater clears the line.

Make sure Shower Head (15A) is securely tightened to Shower Arm (15B).

MAINTENANCE & CARE

CAUTION: Maintenance

DISASSEMBLY

1. Replacement parts may be available at the store where you purchased your faucet.

2. When replacement parts are not available, please write or call Price

Pster Consumer Service.

3. Always turn off water and relieve pressure before working on your faucet.

NOTE: Trim Care

Cleaning Instructions:

For all Handles and decorative nishes, use only a soft damp cloth to clean and shine. Use of polish, detergents, abrasive cleaners, organic solvents or acid may cause damage. Use of

other than a soft damp cloth will nullify our warranty! Special Trim:

Trim products which contain Porcelain or other similar substance are not acceptable for public areas or Commercial use. Installation of Said Trim is at Users Risk!

TROUBLE SHOOTING TIPS

ENGLISH

Water ow is very low.

Check the Cartridge Assembly (D), for debris. Sediment where the water enters the Shower Head (G) can also cause this symptom.

ENGLISH

Water starts out hot and becomes cooler as handle is rotated counter clockwise.

This is a potentially hazardous situation and should be corrected before using the unit.

Check the hot and cold inlet positions (hot- left cold-right). If you have a back to back

installation, (where hot and cold inlets are reversed) refer to Valve Body instruction sheets for back to back installation.

Water ows from the shower head while lling the tub.

Check the position of the Valve Body (J). The letters “SHWR” should be cast into the top and “TUB” on the bottom.

Water doesn’t get hot enough.

Remove Handle (A), Sleeve (B) and Flange (C) and then refer to Valve Body instruction sheets for adjusting temperature range.

Water ows from the tub spout while using the shower.

The seal inside of the diverter mechanism may have become dislodged. The Spout (H) may need replacement.

Temperature or ow does not remain consistent.

The Cartridge Assembly (D) may need cleaning. Shut off water supply. Remove Handle Assembly (A), unscrew Retainer Sleeve (B) and remove Flange (C). Remove Cartridge

assembly (D) and inspect Cartridge (E) and inlets for debris or sediment and ush with water. Reassemble whole unit and test. If problem persists you may need to replace the Cartridge (E).

Sleeve (B) is too short.

Extension kit 910-563 is available at a nominal charge for valves which have been roughed-

in too far back in the wall. The kit contains a one inch stem extension, and longer screw

and a sleeve which is one inch longer than the 972-300.

Dripping from either the tub spout or shower head.

Clean the Cartridge Assembly (D). Check to ensure the two Oval O-Rings (F) on the back of the Cartridge (E) are in place. Reassemble cartridge, stem and bonnet assembly and handle. Turn on the water and test. If the unit still leaks, replace the Cartridge (E).

Make sure that both hot and cold water inlets are turned on.

1–800–PFAUCET (1–800–732–8238)

For Toll-Free Pfaucet information call 1–800–PFAUCET (1–800–732–8238) or visit www.pricepster.com

• Installation Support

• Care and Warranty Information

+ 9 hidden pages