Pfannenberg FLZ 600 Data Sheet

FLZ 600

Control range 40 .. 90% r.H.

Differential gap approx. 5%

Switch point accuracy +/- 4% based on 50% r.H.

Humidification: 24V .. 250V AC / 2(0.2)A - min. 100mA

Dehumidification: 24V .. 250V AC / 5(0.2)A - min. 100mA

Switch capacity
(Value in brackets:
inductive load cos.φ =0.6)

DC: 50V, 1A
75V, 0,5A
min. 100mA

Working temperature range 0°C..+60°C / +30°F..+140°F

Storage temperature -20°C..+80°C / -5°F..+180°F

Type of contact Change-over switch

Sensor Polyamide band

Type of connection 2-pole clamp, 0,5 .. 2,5mm²

Colour RAL 7035 – grey

Protection category IP 20

Assembly Sn ap fastening for 35mm profile bars in accordance with EN 60715

Монтаж

Montage
Assembly
Montage
Montage
Montering
Montaggio
Montaje

Humidistat FLZ 600 Instructions for use

Application:

- The humidistat is used for the monitoring and regulating of humidity in switch cabinets.

- It is implemented as a changeover contact and is either used to humidify ( ) or dehumidify ( ).

- The adjustment of the switch point is made using a slotted screwdriver.

- The adjustment head is used as protection from twisting in the static form.

- The installation position is optional, it must however be in a casing with an authorised protection class (e.g.
switch cabinet).

Safety instructions
The humidistats may only be installed by qualified staff.

The protective measures and the protection against contact are to be ensured by the installation.

The information on the name plate (voltage and current) is to be heeded.

The operational reliability of the humidistat is to be ensured by an operating test.