PRODUCTS EX SIGNALING DEVICES
FLASHING LIGHTS 5/10/15 J
BExBG05 | BExBG10 | BExBG15 ATEX
The flashing light is ideal for almost all mounting requirements: side, ceiling
and floor mounting.
• Categories 2G (Zones 1 and 2), 2D (Zones 21 and 22).
• Extremely bright at up to 15 joules flash energy.
• Large connection box for simple mounting.
• Also available with connection box in increased safety version.
• Very sturdy, manufactured from seawater-resistant aluminium and stainless
steel protection cage.
• BExBG05 can be mounted in all operating positions.
IP 67
protection
system
+70 °C
–50 °C
Ex-certified operating
PRODUCT
DATA
Rated voltage
Operating range
Nominal current consumption
PRODUCT
Rated voltage
Operating range
Nominal current consumption
+70 °C
–40 °C
temperature
AC
BExBG05 BExBG10 BExBG15
230 V 115 V 230 V 115 V 230 V 115 V
AC 50 | 60 Hz
±10 %
55 mA 140 mA 110 mA 250 mA 170 mA 360 mA
DC
BExBG05 BExBG10 BExBG15
48 V 24 V 12 V 48 V 24 V 12 V 48 V 24 V
±25 %
180 mA 300 mA 750 mA 340 mA 660 mA 145 0 mA 480 mA 860 mA
PRODUCT BExBG05D | BExBG05E BExBG10D | BExBG10E BExBG15D | BExBG15E
Type of protection
Explosion protection¹
Category (area of use)
Certificate of conformity
Testing body
Flash energy
Flash rate
Temperature class T
Operating temperature
Storage temperature
Relative humidity
Duty cycle
Service life of the light source
Material
protective cage and bracket
Type of connection
Cable entry¹
Weight
¹ Ex cable gland not included
lens
housing
Exd
Exde
II2G Ex d IIC T4, T5 or T6
II2G Ex de IIC T4, T5 or T6
II2D Ex tD A21 IP67
T85, T100 or T115
5 J 10 J 15 J
T4 / T115°C @ Ta –50 °C ... +70 °C
T5 / T100°C @ Ta –50 °C ... +55 °C
T6 / T85°C @ Ta –50 °C ... +40 °C
light emission still 70 % after 8,000,000 flashes
die-cast aluminium, resistant to salt water, marine grade LM6, red (RAL 3000)
2 x M20, of which one open, optionally PG13.5 or 1/2“ NPT
Ex d IP 67 / Ex de IP 66
II2G Ex d IIC T4 or T5
II2G Ex de IIC T4 or T5
II2D Ex tD A21 IP67
T95, T110 or T125
2G (Zone 1, 2) | 2D (Zone 21, 22)
KEMA 01 ATEX 2030
KEMA
60 flashes/min, stabilised
T4 / T125°C @ Ta –50 °C ... +70 °C
T110°C @ Ta –50 °C ... +55 °C
T5 / T85°C @ Ta –50 °C ... +40 °C
–40 °C … +70 °C
–50 °C … +70 °C
90 %
100 %
glass
stainless steel
1 x 4 mm² or 2 x 2.5 mm²
2.45 kg
2.75 kg
DIMENSIONS
Ex d Ex de
165
75
63
151.5
ARTICLE NO.
Lens colour
31130103000 31130803000 31131103000 31131803000
31130104000 31130804000 31131104000 31131804000
31130105000 31130805000 31131105 000 31131805000
ARTICLE NO.
Lens colour
31120103000 31120803000 31121103 000 31121803000
31120104000 31120804000 31121104000 31121804000
31120105000 31120805000 31121105 000 31121805000
ARTICLE NO.
Lens colour
311101030 00 311108 03000 31111103 000 3111180 300 0
31110104000 31110804000 31111104 000 31111804000
311101050 00 311108 05000 31111105 000 3111180 500 0
Article numbers for other colours and voltages on request.
63
226.5
145
30 30
mounting holes 3x Ø 7
BExBG05-E BExBG05-D
230 V AC 24 V AC 230 V AC 24 V AC
BExBG10-E BExBG10-D
230 V AC 24 V AC 230 V AC 24 V AC
BExBG15-E BExBG15-D
230 V AC 24 V AC 230 V AC 24 V AC
75
239.5
164.5
EX SIGNALING TECHNOLOGY
PRODUCTS EX SIGNALING DEVICES
CONNECTION DIAGRAM
BExBG 15 | BExBG 10 | BExBG 05 – EEx e
internal potential
equalisation
internal earth
terminal
cable entries
2x M20
multi-pin connector for
alternating flash mode
BExBG 05 – EEx d BEXBG15 | BEXBG 10 – EEX D
connecting terminals connecting terminals
multi-pin connector for
alternating flash mode
MANUFACTURER’S DECLARATION
We hereby declare that the explosion-protected flashing light with the type designation BExBG05 … 15 d or e ATEX has been developed and manufactured
in accordance with section 5.1.2 of EN 50014.
This declaration is based on compliance with the following regulations and standards:
References to visual alarm devices can be found in the following standards:
94/9/EG CE conformity
EN 50014 Electrical equipment for areas at risk of explosions – General requirements
EN 50018 Pressure-resistant encapsulation “d”
EN 50019 Enhanced safety “e”
EN 50281-1-1 Electrical equipment for use in areas with combustible dust
EN 60529 Types of protection by enclosure (IP code)
89/336/EWG “Electromagnetic compatibility”
The Ex-BExBG05 – 15 d or e flashing lights are approved for use in potentially explosive areas in Zones 1, 2, 21 and 22 as per 94/9/EU.
Loading...