Ex Signaling devices
Flashing Lights 5 / 10 / 15 Joules
BExBG05 / BExBG10 / BExBG15 ATEX
The ashing light is ideal for almost all mounting requirements:
side, ceiling and oor mounting
• categories 2G (Zones 1 and 2), 2D (Zones 21 and 22)
• extremely bright at up to 15 Joules ash energy
• large connection box for simple mounting
• also available with connection box in increased safety version
• very sturdy, manufactured from seawater-resistant
aluminium and stainless steel protection cage
• BExBG05 can be mounted in all operating positions
5 Joules 10 Joules 15 Joules
r =
11 m
Covering distance
as per EN 54
Electrical data
Rated voltage 230 V AC 115 V AC 230 V AC 115 V AC 230 V AC 115 V AC
Rated frequency 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz
Operating range ± 10% ± 10% ± 10% ± 10% ± 10% ± 10%
Nominal current consumption 55 mA 140 mA 110 mA 250 mA 170 mA 360 mA
Electrical data
Rated voltage 48 V DC 24 V DC 12 V DC 48 V DC 24 V DC 12 V DC 48 V DC 24 V DC
Operating range ± 25% ± 25% ± 25% ± 25% ± 25% ± 25% ± 25% ± 25%
Nominal current consumption 180 mA 300 mA 750 mA 340 mA 660 mA 1450 mA 480 mA 860 mA
Mechanical data
Type of protection Ex d IP 67 / Ex de IP 66
Explosion protection
Category (area of use)
Certicate of conformity KEMA 01 ATEX 2030
Testing body KEMA
Flash energy 5 J 10 J 15 J
Flash rate 60 ashes/min., stabilised
Lens colours clear, yellow, amber, red, green, blue
Temperature class T
Storage temperature - 50 °C … + 70 °C
Relative humidity 90%
Duty cycle 100%
Service life of the ash tube light emission still 70% after 8,000,000 ashes
Material
Type of connection 1 x 4 mm
Cable entry
Weight
1
Ex cable gland not included
r =
17 m
Covering distance
as per EN 54
r =
23 m
Covering distance
as per EN 54
AC
DC
IP 67
Protection
system
BExBG05 BExBG10 BExBG15
BExBG05 BExBG10 BExBG15
BExBG05D/BExBG05E BExBG10D/BExBG10E BExBG15D/BExBG15E
II2G Ex d IIC T4, T5 or T6
1
lens glass
housing die-cast aluminium, resistant to salt water, marine grade LM6, red (RAL 3000)
protective cage and bracket stainless steel
1
Exd 2.45 kg
Exde 2.75 kg
II2G Ex de IIC T4, T5 or T6
II2D Ex tD A21 IP67
T85, T100 or T115
T4 / T115°C @ Ta - 50 °C ... + 70 °C
T5 / T100°C @ Ta - 50 °C ... + 55 °C
T6 / T85°C @ Ta - 50 °C ... + 40 °C
+ 70 °C
- 50 °C
Operating
temperature
II2G Ex d IIC T4 or T5
II2G Ex de IIC T4 or T5
II2D Ex tD A21 IP67
2G (Zone 1, 2)
2D (Zone 21, 22)
2
or 2 x 2.5 mm
2 x M20, of which one open, optionally PG13.5 or 1/2“ NPT
T95, T110 or T125
T4 / T125°C @ Ta - 50 °C ... + 70 °C
T110°C @ Ta - 50 °C ... + 55 °C
T5 / T85°C @ Ta - 50 °C ... + 40 °C
2
Dimensions
Ex d Ex de
165
75
63
226.5
151.5
30 30
mounting holes 3 x 7 mm Ø
145
Ordering details
Article numbers BExBG05-E BExBG05-D
Lens colour Rated voltage 230 V AC 24 V DC 230 V AC 24 V DC
yellow 311 30 10 3 000 311 30 80 3 000 311 31 10 3 000 311 31 80 3 000
amber 311 30 10 4 000 311 30 80 4 000 311 31 10 4 000 311 31 80 4 000
red 311 30 10 5 000 311 30 80 5 000 311 31 10 5 000 311 31 80 5 000
Article numbers BExBG10-E BExBG10-D
Lens colour Rated voltage 230 V AC 24 V DC 230 V AC 24 V DC
yellow 311 20 10 3 000 311 20 80 3 000 311 21 10 3 000 311 21 80 3 000
amber 311 20 10 4 000 311 20 80 4 000 311 21 10 4 000 311 21 80 4 000
red 311 20 10 5 000 311 20 80 5 000 311 21 10 5 000 311 21 80 5 000
Article numbers BExBG15-E BExBG15-D
Lens colour Rated voltage 230 V AC 24 V DC 230 V AC 24 V DC
yellow 311 10 10 3 000 311 10 80 3 000 311 11 10 3 000 311 11 80 3 000
amber 311 10 10 4 000 311 10 80 4 000 311 11 10 4 000 311 11 80 4 000
red 311 10 10 5 000 311 10 80 5 000 311 11 10 5 000 311 11 80 5 000
Article numbers for other colours and voltages on request
Options / Accessories
GOST
Manufacturer’s declaration
We hereby declare that the explosion-protected ashing light with the type designation BExBG05 … 15 d or e ATEX
has been developed and manufactured in accordance with section 5.1.2 of EN 50014.
This declaration is based on compliance with the following regulations and standards:
94/9/EG CE conformity
EN 50014 Electrical equipment for areas at risk of explosions – General requirements
EN 50018 Pressure-resistant encapsulation ‘d’
EN 50019 Enhanced safety ‘e’
EN 50281-1-1 Electrical equipment for use in areas with combustible dust
EN 60529 Types of protection by enclosure (IP code)
89/336/EWG ‘Electromagnetic compatibility’
The Ex-BExBG05 - 15 d or e ashing lights are approved for use in potentially explosive areas in Zones 1, 2, 21 and 22 as per 94/9/EU.
75
63
239.5
164.5
Visual Ex
signaling devices
210
211
Loading...