PEUGEOT Elystar ADV 4, Elystar ADV 4 Temps Owner's Manual
Owner’s manual
Elystar ADV 4
Temps
Elystar ADV 4
Temps
1
Information
Information /Prolonged immobilisation .......................... 2-3
Equipment..........................................................................4
Instrument panel ................................................................5
Electronic display ............................................................... 6
Switch.................................................................................7
Petrol / Oil ..........................................................................8
Check and change engine oil.............................................9
Check and change coolant ..............................................10
Battery / Fuse...................................................................11
Lighting / Signalling ..........................................................12
Starting the engine ...........................................................13
Running / driving...............................................................14
Spark plug / Air filter ......................................................... 14
Braking .............................................................................15
Tyres ................................................................................16
Removing / Refitting front / rear wheel ............................1 7
Transponder.....................................................................18
Specifications...................................................................19
Elystar ADV 4
Temps
2
Information
You have just purchased a PEUGEOT scooter. Thank
you for the confidence that you have shown in our
company.
This guide describes how to control, use and perform basic
maintenance on your new PEUGEOT scooter. As with all
high technology machinery, you will find it easier to control
and you will obtain the best results from your SCOOTER if
you use it and maintain it with care and attention. Your
dealer will advise and inform you and use his experience to
strictly respect the maintenance plan this is essential to
keep your scooter in perfect working condition. Your PEUGEOT dealer knows all your scooter’s special features. He
has PEUGEOT original parts and special tools to perform
standard maintenance on your scooter under optimum conditions.
Safety recommendations
The safety of a scooter depends on the care taken by its
driver.
Excessive speed is a decisive factor in many accidents.
Respect speed limits and never go faster than is safe
under the road conditions. Take care not to skid on road
marking lines. Always do a general check before using
your scooter to make sure that it can be used safely.
Traffic rules require that the driver and his passenger wear
a helmet. It is also recommended that you wear gloves, an
eye protection and bright and visible clothes to increase
safety. A new Scooter driver should become familiar with
his scooter before starting to drive in traffic. A scooter
driver must signal his presence to other users by:
- Switching on his lights when in motion
- Avoiding driving in places in which he is not visible to
other vehicles
- Driving carefully
- T aking special care at intersections, car p ark entrances
and exits, and slip roads.
Your scooter is designed for town use on the road only.
Optional luggage and briefcase carriers are designed to
transport lightweight objects. Make sure that the weight is
distributed evenly and that loads are securely fastened :
Maximum Loads : 3 kg
Your scooter is designed to satisfy legal requirements,
please do not make any modifications to it particularly to
the exhaust.
Use only petrol, oil and lubricants tested and recommended
by PEUGEOT .
Maintenance recommendation
In order to keep your scooter in a safe and reliable riding
condition, do not modify it and only use gennine PEUGEOT
parts for maintenance and repair. Use of other spare parts
may detrimentel to your vehicle
If your scooter is involved in a crash, have the main parts
checked carefully, for example all parts making up the
frame,suspension and steering system. This inspection
will help to restore essential safety conditions.
It is recommended that you make a general check after
storing your scooter for an extended period of time .
To avoid injury, always make sure that the engine is
switched off and the scooter is stable on its stand on
a flat surface before performing any maintenance
operations.
Take your scooter to a Peugeot dealer to do any repair
work, checks, tune-ups, maintenance or to obtain
recommendations for use.
The bodywork is made of plastic parts coated with special
paints making it easy to keep it looking as good as new.
Cleaning consists of washing dirty parts with soapy water
or with a mild detergent, rinsing frequently with clean water
and drying with a chamois leather.
In general do not use high pressure cleaners or solvents
such as petrol or highly alkaline detergents.
You can always call a Peugeot dealer if in doubt. He will
advise you about how to use maintenance products or to
repair scratched or grazed parts.
Prolonged immobilisation
In the event of prolonged immobilisation of the vehicle,
(longer than 1 month), it necessary by precaution to :
- Remove the battery and to store it in a horizontal
position in a dry and cool place, recharge it (see page 23)
before and after storage if necessary
Start the engine after storage :
If the vehicle has been stored for more than 1 month,
drain the fuel tank, the carburator float chamber and fill
with new fuel.
- Activate the starter without accelerating.
Starter activation time can last up to 7 seconds.
- If the engine does not start within 7 seconds,
wait 3 to 5 seconds and repeat the previous action.
- Repeat these two operations until the engine
starts (the number of actions on the starter depends on
the time the vehicle has been stored.
Once the engine has started, gradually accelerate while
braking until the engine warms up (the time to reach the
temperature depends on the time the vehicle has been
stored). The engine will provide optimum performance
only after running a certain time, depending on the
external temperature.
Please take the
time to read it
carefully.
Elystar ADV 4
Temps
3
Inspection before the vehicle
leaves
What the buyer has to do.
To check
- The fuel level
- The oil level
- The possible leaks
- The state of the tyres and their inflating
- The level of the brake fluid
- The level of cooling fluid
- The state of wear of the brake pads
To check the smooth
working of
- The front and the back brakes
- The accelerator
- The front and back lightings
- The stop light and the indicators
- The horn
Protection of the environment
General points
- A worn spark plug, an incorrectly fixed interference suppresser, a clogged up air filter, a
poorly adjusted carburettor are all potential
sources of problems which may lead to a significant reduction in the life span of the catalytic
converter and the exhaust system.
- In the event of dismantling, check the tightness on the cylinder end after reassembly (it is
essential to replace the seal).
- Any changes made to engine specifications
(ignition, carburation, timing, ...) is likely to lead to
the rapid destruction of the exhaust system.
Fuel / Lubricant
- Use only unleaded fuel
- Avoid to run out of fuel while driving
- Use only the recommended lubricants
- Don´t use any additives for fuel or lubricants
Ignition
- In case of misfiring or loss of power, slow
down and cut off the engine as described.
Contact your local dealer when the problems
persists
Cutting off the engine
- Switch off ignition only when the engine runs
at idle speed
Starting the engine
- In case of problems when starting the
engine, contact your dealer to have it checked
Using your vehicle
- Avoid driving or stationing your vehicle on
flammable underground (e.g. dry leaves)
For reasons of continuous
improvement, Peugeot Motocycles
reserves the right to modify, delete or
add any part number quoted
(photos non-contractual)
Copyright forbidden without any
written authorisation from
Peugeot Motocycles.
For best operation of your engine,
use only non-leaded petrol 95 or 98
Elystar ADV 4
Temps
4
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
D
C
A
I
H
E
G
P
T
R
J
M
L
N
S
K
Q
F
B
O
Equipement
- Battery housing
- Manufacturer’s plate
- Saddle lock
- Passenger support handle
- Rear brake
- Engine number
- Stand lever
- Central stand with lever
- Side stand *
(with automatic lift)
- Front disk brake
- Expansion vessel cover
- Bag hook *
- Ignition key
- Throttle
- Flap
- Hand glove box
- Rear brake fluid level
- Rear brake lever
- Front brake fluid level
- Front brake lever
* According to the model
Elystar ADV 4
Temps
5
2
5
1
2
3
4
5
6
7
1
4
3
7
6
Instrument panel
- Speedometer
The needle shows the vehicle speed in km/h or mph.
- Oil pressure telltale
Warning
If the oil pressure telltale comes on when driving, it is
essential to stop the vehicle and to check the level of
engine oil (see level of engine oil page 19).
- Coolant temperature indicator
If the needle goes into the red area, it is essential to stop
the engine and to wait for it to cool down (check the level as
shown on page 21 and go to a dealer’s)
- Indicator light
- Headlight indicator light
- Antit theft warning light
- Electronic display
see page 13
Elystar ADV 4
Temps
PEUGEOT
Km
M
HRS
TOTAL THIP
PEUGEOT
Km
M
HRS
TOTAL THIP
A
A
8
9
10
11
12
8
9
10
11
12
A
A
A
A
A
A
A
6
B
B
Electronic display
- Mileage counter
- (TOTAL) Indicates the total distance travelled either in
Km or in miles.
- By pressing button the display will change to the
trip counter and vice versa.
- T rip counter
- (TRIP) Indicates the trip distance travelled in Km or in
miles.
- The trip counter can be reset by keeping button
pressed down for more than 5 seconds when the trip
counter value is displayed.
- Digital clock
The clock displays the hours and the minutes, the ‘‘:’’
flash on and off. In order to set the time (which must
be done with the vehicle at a standstill and with the
counter on ‘TOTAL’), keep button pressed down
for more than 2 seconds, the hour figure will flash on and
off; to change it, press button . In order to move
to the next figure, keep button pressed down for
more than 2 seconds. When the last figure has been set,
keep button pressed down for more than 2
seconds.
- Fuel level indicator
The 8 segments indicate the fuel level; the vehicle is
running on its reserve capacity when the first two
segments are flashing. The reserve capacity
covers about 20 km.
- Service indicator *
After the first 500 km and every 5000 km thereafter, the
indication ‘‘- - - -’’ appears on the clock display for 10
seconds each time the engine is started; this means that
the vehicle should go in for a service. In order to reset
the counter after the service, turn on the ignition whilst
simultaneously pressing button
* According to the model
Loading...