Petsafe ScoopFree Original Self-Cleaning Litter Box User Manual

User Guide!
!
Thank you for purchasing a ScoopFree®
The Only Self-Cleaning Litter Box You Can Leave Alone For Weeks At A Time
Read User Guide Completely Before First Use
Save for Reference
Register your ScoopFree
litter box at Scoopfree.com
ScoopFree Overview 2 Automatic Operation 2 Cycle Button 2 Product Setup 3 Litter Tray Installation 4 Privacy Hood 5 Adjustable Rake Delay 6 Health Counter 7 Maximizing Litter Tray Life 8 Acclimating Your Cat 8 Indicator Light 9 Safety Precautions 9 Changing the Litter Tray 10 Care and Cleaning 11 Troubleshooting 11,12 Replacement Litter Trays 13 Customer Service 13 Guarantee & Limited Warranty 14 Important Safeguards 15
Don’t forget to register your ScoopFree
Litter Box at www.scoopfree.com
2
ScoopFree Overview
This ScoopFree Self-Cleaning Litter Box includes your first litter tray, which is filled with premium crystal litter.
The crystal litter absorbs urine and dries out solid waste, resulting in unbeatable odor control.
ScoopFree automatically rakes solid waste into a covered waste trap after each use, leaving the litter clean and fresh.
There is nothing to fill, empty or clean for weeks at a time.
Automatic Operation
Your cat will use ScoopFree just like any other litter box.
Optical sensors will detect when your cat is inside the box.
The crystal litter will immediately start to absorb moisture, dry out
waste and lock in odors. Please note: crystal litter does not clump.
A 20-minute countdown cycle will begin when your cat leaves the box and the indicator light will blink slowly.
If your cat returns to the litter box, the countdown cycle will stop.
The 20-minute countdown cycle will reset when your cat leaves the
litter box again.
After the 20-minute countdown, the rake will sweep the litter and move solid waste into the waste trap.
The rake will flip over on its return path to smooth out and level the litter bed.
Cycle Button
Although ScoopFree™ is designed to operate automatically; you may manually control the rake by pushing the cycle button on the top of the litter box.
Push once to start rake cycle.
Push again to stop cycle.
Push one more time, and rake returns to home position.
If the rake is stopped somewhere other than the home position, pressing the cycle button resets the box and returns the rake home.
Don’t forget to register your ScoopFree
Litter Box at www.scoopfree.com
3
Product Setup
ScoopFree is packaged for protection during shipping. Please remove all packaging material carefully.
Packaging material is not a toy. Keep away from children and pets.
The power cord is shipped inside a small white box. Do not discard
packaging until you complete product setup.
Find a clean, dry, and level location for your ScoopFree litter box.
Connect the power cord to the litter box and an electrical outlet.
IMPORTANT:
The rake may move automatically when you connect power to the litter box. Make sure there is nothing inside the litter box when you plug in the litter box.
If not at the home position, the rake will automatically move to the home.
After the rake stops, the indicator light will glow steady green.
Waste Trap
Lid
Litter Tray
Litter Box
Frame
Litter Tray with Cover
Underneath
Don’t forget to register your ScoopFree
Litter Box at www.scoopfree.com
4
Litter Tray Installation
Step 1: Place cover of litter tray under litter tray. The cover is extra protection against leaks and will be used later for disposal.
Step 2: Record Today’s Date of litter tray installation and Tray Change Date on the waste trap label.
Recommended Disposable Litter Tray Replacement:
o At least every
20−30 days for 1 cat 10−15 days for 2 cats 7−10 days for 3 cats
Step 3: Grab waste trap lid to lift litter box until it is standing on its end.
Step 4: Grab litter tray near waste trap and slide opposite end of tray against back of litter box. See illustration at right for orientation.
Step 5: Lower litter box onto litter tray. You should hear a click, which confirms the magnets on the waste trap lid have connected to the magnet contacts on the litter tray waste trap. Make sure the litter box is level and sitting on the tray.
Step 6: Open the litter bag by tearing corner notch. Empty litter into tray. Spread litter evenly but do not put litter under the waste trap. Discard bag.
Step 7: Make sure indicator light is on steady green. If flashing, level out the litter so that it is not blocking the optical sensors.
Your litter box is now ready for use!
Important Warning: Using tray
longer than recommended
may result in leakage
Don’t forget to register your ScoopFree
Litter Box at www.scoopfree.com
5
Privacy Hood
In addition to making ScoopFree look better, a removable Privacy Hood adds more comfort and privacy for your cat along with better litter containment and odor control for you.
This feature does not come with ScoopFree Original.
The Privacy Hood is included with ScoopFree Ultra, and may be
purchased separately for use with ScoopFree Original from leading retailers or www.ScoopFree.com.
TO INSTALL THE HOOD:
Remove plugs, if installed, to reveal holes on top of litter box.
Put the pegs on the bottom of the hood into the holes on the top of
the litter box.
Insert the pegs at the back of the litter box first, shown as #1 in the picture.
Then insert the front pegs, shown as #2 on the right.
The hood should fit snuggly into all the holes.
Pegs
#1
Pegs
#2
Loading...
+ 11 hidden pages