Petsafe Big/Little Dog Remote Trainer, Comfort-Fit Operating And Training Manual

2 1-800-732-2677
Thank you for choosing PetSafe®. Our mission is to ensure your pet’s safety by providing you the tools and techniques to successfully train your pet. If you have any questions, please contact the Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net.
____________________________________________________________________
Table of Contents
Components ...............................................................................................3
Other Items You May Need ..........................................................................3
How the System Works ................................................................................3
Key Defi nitions ...........................................................................................4
Operating Guide
Prepare the Remote Transmitter ................................................................5
Prepare the Receiver Collar .......................................................................6
Fit the Receiver Collar ..............................................................................7
Find the Best Intensity Level for Your Pet ..................................................8
Understanding the Remote Transmitter .....................................................9
Training Guide
General Tips ...........................................................................................10
Teaching Basic Obedience
The “Sit” Command ............................................................................ 10
The “Come” Command ....................................................................... 11
The “Stay” Command .........................................................................12
Eliminating Unwanted Behavior
Jumping Up .........................................................................................12
Digging ............................................................................................... 13
Chasing ............................................................................................... 14
Trash Raiding ......................................................................................14
Excessive Barking ................................................................................ 15
Frequently Asked Questions ......................................................................16
Troubleshooting ........................................................................................ 17
To Pair the Remote Transmitter and Receiver Collar ................................... 18
Test Light Instructions ..............................................................................18
Terms of Use and Limitation of Liability ....................................................19
FCC ......................................................................................................... 19
www.petsafe.net 3
Components
Warranty
Card
Warranty
Receiver
Collar (Big Dog Shown)
Operating and
Training Guide
9-Volt Battery
Remote
Transmitter
Battery
(PetSafe® RFA-67)
Test Light
Tool
ID Tag Ring
Other Items You May Need
• Scissors
• Non-metallic collar and 10-foot leash
How the System Works
The PetSafe Remote Trainer has been proven safe, comfortable, and effective for all pets over 8 pounds. This system assists you in controlling your pet without a leash in a range up to 100 yards. At the push of a button, the Remote Transmitter sends a signal, activating the Receiver Collar. Using the Remote Trainer consistently and correctly, many misbehaviors that your pet exhibits can be corrected or any basic obedience commands can be taught.
4 1-800-732-2677
Key Defi nitions
Remote Transmitter: Transmits the radio signal to the
Receiver Collar.
Intensity Level Dial: Provides a choice of 10 different levels of stimulation to enable you to match the level to your pet’s temperament.
Transmitter Indicator Light: Indicates when any button on the Remote Transmitter is pressed. This light also serves as a low battery indicator.
Tone Button: Sends an audible tone to your pet. There is no stimulation associated with this button.
Stimulation Button: Delivers stimulation to your pet through the Contact Points. When this button is held down continuously for 8 seconds, the Remote Transmitter will “time-out”, and you must release and press the button again before any additional stimulation can be delivered to your pet.
Remote Transmitter
Intensity Level Dial
Transmitter Indicator Light
Tone Button
Stimulation Button
Intensity Level
Receiver Collar: Receives the radio signal from the Remote Transmitter.
Receiver Indicator Light: Indicates when the Receiver Collar has been turned on or off. This
light also serves as a low battery indicator
Contact Points: Deliver stimulation to your pet.
.
Battery
Contact Points
Antenna
ON/OFF
Button
o
n
/
o
f
f
Receiver
Indicator
Light
Big Dog Receiver Collar
Receiver Collar
ON/OFF
Button
Antenna
Contact Points
Battery
o
n
/
o
f
f
Little Dog Receiver Collar
Receiver
Indicator
Light
www.petsafe.net 5
Operating Guide
Prepare the Remote Transmitter
To Insert and Remove the Battery
1.
Hold the Remote Transmitter face down and pull the battery door open (1A, 1B).
2. Insert the 9-volt battery with the positive side oriented as shown (1C).
3. Replace the battery door by positioning the bottom edge (1D), and snap the battery door into place.
+ --
+ --
1A 1B 1C 1D
Transmitter Indicator Light – Function and Response
Remote Transmitter Function Transmitter Indicator Light Response
Any button is pressed Solid in color
Low battery Flashes every 4 to 5 seconds
Step
1
6 1-800-732-2677
Prepare the Receiver Collar
To Insert and Remove the Battery
Note: Do not install the battery while the Receiver Collar is on your pet.
This Receiver Collar utilizes a replaceable PetSafe® battery (RFA-67). This unique battery is designed to make battery replacement easier and increase water protection.
To insert the battery, align the symbols on the battery (arrow) and Receiver Collar (triangle). Using the edge of the Test Light Tool as shown, turn the battery clockwise until the arrow lines up with the lock symbol on the housing (2A, 2B) .
To remove the battery, turn the battery counter-clockwise using the edge of the Test Light Tool as shown, (2C, 2D).
2A
2B
2D
2C
DO NOT attempt to cut into or pry open the battery. Be sure to discard the used battery properly.
A replacement PetSafe® battery (RFA-67) can be found at many retailers. Contact the Customer Care Center at 1-800-732-2677 or visit our web site at www.petsafe.net for a list of common retailers.
Turning the Receiver Collar On and Off
To turn the Receiver Collar on, press and release the On/Off Button. The Receiver Indicator Light will fl ash twice after the button is released, indicating the Receiver Collar is ready to receive signals from the Remote Transmitter.
Once the Receiver Collar has been turned on, press the top button of the Remote Transmitter. Upon pressing, the Receiver Collar should beep for as long as the top button is pressed. If it does not, see “To Pair the Remote Transmitter and the Receiver Collar” in the Troubleshooting section.
To turn the Receiver Collar off, press and release the On/Off Button. The Receiver Indicator Light will fl ash three times after the button is released, indicating the unit has been turned off.
Note: To extend the life of the batteries, turn the Receiver Collar off when it is not in use.
Important: If the Receiver Collar is left on continuously, the maximum battery life (before replacing batteries) will be two weeks.
Step
2
Loading...
+ 14 hidden pages