Permatex Anti-Seize Lubricant Technical Data Sheet
Toll Free: 87 PERMATEX
(877-376-2839)
10 Columbus Blvd., Hartford,
Connecticut 06106
6875 Parkland Boulevard, Solon
Ohio 44139
PRODUCT DESCRIPTION
Permatex Anti-Seize Lubricant is a heavy duty, high
temperature lubricant that prevents galling, seizing and
corrosion during assembly and assures easier disassembly.
Also reduces wear in heavy pressure applications. The
product contains a refined blend of aluminum, copper and
graphite lubricants that can be used on slow moving parts.
Meets or exceed the requirements of Military Specification MilA-907E.
PRODUCT BENEFITS
• Effectively lubricates assemblies exposed to high
temperatures and heavy contact pressures
• Suitable for service up to 870°C (1,600°F)
• Reduce corrosion and seizing due to weathering or
chemicals
• Permits easy disassembly of parts exposed to heat or
corrosive environments
• Brush-top aerosol available
TYPICAL APPLICATIONS
• Spark plug threads
• Exhaust manifold and engine bolts
• Anchor pins on brake assemblies
• U-bolts and spring bolts
• Lubricates and permits easy disassembly of assemblies
exposed to high temperatures and heavy contact
pressures, such as boiler and oven parts, jet engines, and
industrial turbines.
• Hinges, gears, chain, sprockets and rollers
DIRECTIONS FOR USE
1. Clean mating surfaces before application
2. For best results, apply to clean, dry surfaces.
3.
Clean surfaces with Permatex Brake & Parts Cleaner.
4. Wire brush any loose surface rust.
5. Apply Anti Seize to the parts that require protection.
6. Reassemble parts using normal torque values.
7. Wipe off excess material.
8. Clean brush on aerosol product to make future
applications easier.
For Cleanup
1. Clean parts of excess material with disposable towel.
2.
Clean hands with Permatex
PROPERTIES OF MATERIAL
Typical Value
Chemical Type Grease
Appearance Silver metallic paste
Odor Light petroleum
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., HARTFORD SQUARE NORTH, 10 COLUMBUS BOULEVARD, HARTFORD, CT 06106 PHONE – (1-87PERMATEX)
brand hand cleaners.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
NOT FOR PRODUCT SPECIFICATIONS.
Technical Data Sheet
Permatex
Specific Gravity 1.13
Temperature Range, °C (°F)
Viscosity, poise 1000 - 2000
Flash Point
GENERAL INFORMATION
This product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected
for use with chlorine or other strong oxidizing materials.
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
Ordering Information
Storage
Products shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8° and 28°C
(46° and 82°F) unless otherwise labeled. Optimal storage is at
the lower half of this temperature range.
Note
The data contained herein are furnished for information only
and are believed to be reliable. We cannot assume
responsibility for the results obtained by others over whose
methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Permatex, Inc.
products and disclaims any liability for consequential or
incidental damages of any kind, including lost profits.
This product may be covered by one or more United States or
foreign patents or patent applications.
Anti-Seize Lubricant
AAM Revised 02/09
-60(-51) to 870 (1,600)
>350°F
Part Number Container Size
81343(133AR) 1 oz. tube
80071 4 oz. bottle
80078(133K) 8 oz. brush-top bottle
80206 1 gallon pail
80208(767) 16 oz. brush-top bottle
09975 5 gm pouch
80643 4 oz. brush-top aerosol
Permatex is a trademark of Illinois Tool Works, Inc. 2009 Permtex, Inc. All rights reserved.
Loading...