Perlick 924 Specifications
Item #
uantity
Q
Drop-in Self-Leveling Dispensers
Adjust-a-Fit®- Open, Shielded and Heated
Adjustable Diameter And Dispensing
Height Adjustments Without Tools
Five tube sizes, each with a 3¼ (83mm)” diameter
•
adjustment range.
Heated dispensers feature thermostatic control.
•
Thermostat minimum 100°F (38°C) - maximum
175°F (79°C).
All models have a 25” (635mm) plate
•
stacking capacity.
Spec. # AIA #
Model 922
Open
Model 924
Heated
Model 923
Shielded
Specifications
Unit shall be of welded stainless steel construction. Dispensers shall hang from surface opening by an
18-gauge flange ring and feature three each 22-gauge vertical side supports welded to 20-gauge bottom plate. Self-leveling dish carriage shall be of welded stainless steel construction and shall travel
vertically in dispenser tube with 3 sets of nylon roller guides for smooth operation. Carriage shall have
22-gauge removable dish platform. Unit shall feature flange mounted perimeter extension springs,
which are detachable from the dish carriage to provide adjustment without tools for different weight
dishes. Unit shall also feature three stainless steel dish guides running the entire height of the dispenser. Dish guides shall pivot to provide diameter adjustability of 3-1/4” (83 mm) without tools or
removing components to accommodate various diameter dishes. Unit shall have a vertical plate
stacking capacity of 26” (660 mm). Unit shall be NSF listed.
Specifications continued on back.
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 1009 DISLDA Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-2
Drop-in Self-Leveling Dispensers
Adjust-a-Fit®- Open, Shielded and Heated
Specifications Continued
eated Models Only:Unit shall be 120 VAC 60 Hz and shall have 5´ (1524 mm) power supply cable
H
with L5-15P NEMA twist lock plug for 120 VAC. Dispenser tubes shall be fully enclosed in 22 gauge
stainless steel, and have a circular bottom mounted 300 or 450 watt heater element to provide
convection heat. Heating system shall feature thermostatic control in a tamper protective location with
safe high-end shut off. Control shall have infinite settings between low and high temperature cut-outs.
Thermostat shall be field adjustable for average interior air temperature between 100° F (38° C) and
175° F (79° C) at middle adjustable thermostatic setting. On-off switch and power indicator light shall be
mounted on top flange of dispenser. Average dish temperature rise of 40° F (22° C) above ambient
shall be achieved within one hour of initial heating cycle at middle adjustable thermostatic setting. Unit
shall be UL listed.
OPTIONAL ACCESSORIES
B
• Stainless steel dispenser covers
• 208/240 VAC 60Hz (heated models)
• 220 VAC 50 Hz (heated models)
Specification sheets available at www.eLakeside.com
Dimensions
Model
Open Models
902 2-3/4” to 6” (970 to 152)
912 4-1/4” to 7-1/2” (108 to 191)
922 6-1/2” to 9-3/4” (165 to 248)
932 8-3/4 to 12” (222 to 305)
1942 10” to 13-1/4” (254 to 337)
Shielded Models
903 2-3/4” to 6” (970 to 152)
Spec. # AIA #
913 4-1/4” to 7-1/2” (108 to 191)
923 6-1/2” to 9-3/4” (165 to 248)
933 8-3/4 to 12” (222 to 305)
1943 10” to 13-1/4” (254 to 337)
Heated Models
914 4-1/4” to 7-1/2” (108 to 191)
924 6-1/2” to 9-3/4” (165 to 248)
934 8-3/4 to 12” (222 to 305)
1944 10” to 13-1/4” (254 to 337)
Accommodates Plate Size
Height To Ring
(A)
27¾”
27¾”
27¾”
27¾”
27¾”
28”
28”
28”
28”
28”
28”
28”
28”
28”
(705) 10” (254)
(705) 11-1/2” (292)
(705) 13-3/4” (349)
(705) 16” (406)
(705) 17-1/16” (432)
(705) 10” (254)
(705) 11-1/2” (292)
(705) 13-3/4” (349)
(705) 16” (406)
(705) 17-1/16” (432)
(705) 11-1/2” (292)
(705) 13-3/4” (349)
(705) 16” (406)
(705) 17-1/16” (432)
Top Ring
Diameter (B)
AutoCAD drawings available through KCL CADalog
Counter Cut-Out
9-1/8”
10-5/8”
12-7/8”
15-1/8”
16-1/4”
9-1/8”
10-5/8”
12-7/8”
15-1/8”
16-1/4”
10-5/8”
12-7/8”
15-1/8”
16-1/4”
Measurements in ( ) denote metric millimeters, unless otherwise specified.
(232) _ _ 13 (5.9)
(270) _ _ 15 (6.8)
(327) _ _ 18 (8.2)
(384) _ _ 20 (9.1)
(413) _ _ 21 (9.6)
(232) _ _ 20 (9.1)
(270) _ _ 22 (10)
(327) _ _ 27 (12.2)
(384) _ _ 31 (14.1)
(413) _ _ 32 (14.5)
(270) 300 2.5 25 (11.3)
(327) 450 3.8 30 (13.6)
(384) 450 3.8 34 (15.4)
(413) 450 3.8 35 (15.9)
Electrical
Watts Amps
A
lbs. (kg.)
Lakeside Manufacturing, Inc.
4900 West Electric Avenue • West Milwaukee, WI 53219 U.S.A.
800-558-8565 • 414-902-6400 • Fax 414-902-6446 • www.eLakeside.com
Lit# 1009 DISLDA Lakeside reserves the right to modify specifications or discontinue models without prior notification. Printed in the U.S.A.
SL-2
Loading...