How it Works
Perfect Aire
Loading...
PAC12000
User Manual
18 pgs2.78 Mb0

Perfect Aire PAC12000 User Manual

CONTENTS
1. SAFETY PRECAUTIONS..................................................................2
2. IMPORTANT SAFETY INSTRUCTIONS ..........................................4
3. NORMAL SOUNDS ...........................................................................5
4. AIR CONDITIONER FEATURES .......................................................5
5. INSTALLATION INSTRUCTIONS......................................................10
6. CARE AND CLEANING ....................................................................14
7. TROUBLESHOOTING TIPS...............................................................15
Read This Manual
Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner. You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.
!
CAUTION
NOTE:
All the illustrations in this manual are for explanation purpose only. Your air conditioner may be slightly different. The actual shape shall prevail.
The design and specifications are subject to change without prior notice for product improvement.Consult with the sales agency or manufacturer for details
1
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classified by the following indications.
WARNING
!
CAUTION
!
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to property.
Meanings of symbols used in this manual are as shown below.
Never do this.
!
!!
Plug in power plug properly.
Otherwise, it may cause electric shock or fire due to excess heat generation.
Do not modify power cord length or share the outlet with other appliances.
It may cause electric shock or fire due to heat generation.
!!
!!
Always ensure effective grounding.
Incorrect grounding may cause electric shock.
!!
Unplug the unit if strange sounds, smell, or smoke comes from it.
It may cause fire and electric shock.
!!
Keep firearms away.
It may cause fire.
Always do this.
WARNING
!
Do not operate or stop the unit by inserting or pulling out the power plug directly from the wall.
It may cause electric shock or fire due to heat generation.
Do not operate with wet hands or in damp environment.
It may cause electric shock.
Do not allow water to run into electric parts.
It may cause failure of machine or electric shock.
Do not use the socket if it is loose or damaged.
It may cause fire and electric shock.
Do not use the power cord close to heating appliances.
It may cause fire and electric shock.
Do not damage or use an unspecified power cord.
It may cause electric shock or fire. If the power cord is damaged, it must be replaced by the manufac­ turer or an authorized service center or a similarly qualified per­ son in order to avoid a hazard.
Do not direct airflow at room occupants only.
This could damage your health.
!!!!
Always install circuit breaker and a dedicated power circuit.
Incorrect installation may cause fire and electric shock.
Do not open the unit during operation.
It may cause electric shock.
Do not use the power cord near flammable gas or combustibles, such as gasoline, benzene, thinner, etc.
It may cause an explosion or fire.
!!
Ventilate room before operating air conditioner if there is a gas leakage from another appliance.
It may cause explosion, fire and, burns.
Do not disassemble or modify, or drill holes into the air conditioner.
It may cause failure and electric shock.
2
When the air filter is to be removed, do not touch the metal parts of the unit.
CAUTION
!
Do not clean the air conditioner with water.
!!
Ventilate the room well when used together with a stove, etc.
It may cause an injury.
!!
When the unit is to be cleaned, switch off, and turn off the circuit breaker.
Do not clean unit when power is on as it may cause fire and electric shock, it may cause an injury.
!!
Stop operation and close the window in severe storms or hurricanes.
Operation with windows opened may cause moisture to enter the room.
Do not place obstacles around air-inlets or inside of air-outlet.
Water may enter the unit and degrade the insulation. It may cause an electric shock.
Do not put a pet or house plant where it will be exposed to direct air flow.
This could injure the pet or plant.
!!
Hold the plug by the head of the power plug when taking it out.
It may cause electric shock and damage.
!!
Ensure that the installation bracket of the outdoor appliance is not damaged due to prolonged exposure.
An oxygen shortage may occur.
Do not use for special purposes.
Do not use this air conditioner to preserve precision devices, food, pets, plants, and art objects. It may cause deterioration of quality, etc.
!!
Turn off the main power switch when not using the unit for a long time.
It may cause failure of product or fire.
!!
Always insert the filters securely. Clean filter once every two weeks.
It may cause failure of appliance or accident.
If bracket is damaged, there is concern of damage due to falling of unit.
Do not use strong deter­gent such as wax or thinner but use a soft cloth.
Appearance may be deteriorated due to change
Do not place heavy object on the power cord and ensure that the cord is not compressed.
There is danger of fire or
electric shock. of product color or scratching of its surface.
!!
Use caution when unpacking and installing. Sharp edges could cause injury.
Operation without filters may cause failure.
!!
Never drink water drained from air conditioner.
It contains contaminants and could make you sick.
!!
If water enters the unit, turn the unit off at the power outlet and switch off the circuit breaker. Isolate supply by taking the power-plug out and contact a qualified service technician.
3
IMPORTANT SAFETY INSTRUCTIONS
NOTE The power supply cord with
this air conditioner contains a current detection device designed to reduce the risk of fire. Please refer to the section Operation of Current Device for details. In the event that the power supply cord is damaged, it must be replaced by an authorized repairman.
Power supply cord with 3-prong grounding plug and current detection device
,
Do not, under any circumstances, cut, remove, or bypass the grounding prong.
,
WARNING
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord.
WARNING
Be sure the electrical service is adequate for the model you have chosen. This information can be found on the serial plate, which is located on the side of the cabinet and behind the grill. Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a three-prong grounding plug for protection against shock hazards. Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle. Ensure the receptacle is accessible after the unit installation. Do not run air conditioner without side protective cover in place. This could result in mechanical damage within the air conditioner.
Do not use an extension cord or an adapter plug.
For your safety
Electrical Information
Operation of Current Device
The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following:
1. Plug in the air conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button, you will notice a click as the RESET button pops out.
3. Press the RESET button, again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also indicated by a light on the plug head.)
NOTES:
Do not use this device to turn the unit on or off. Always make sure the RESET button is pushed in for correct operation. The power supply must be replaced if it fails reset when either the TEST button is pushed, or it cannot be reset. A new one can be obtained from the product manufacturer. If power supply cord is damaged, it cannot be repaired. It MUST be replaced by an authorized repairman.
NOTE:This air conditioner is designed to be operated under conditions as follows:
Ambient temp.: 64 ~109 18~43
Operation temp.: 62 ~90 17~32
Cooling Operation
Note:
If the unit is used in a condition with a relative humidity over 80%, there will be condensed water on the surface of the unit.
The relative humidity of room should be less than 80%.
If the unit operated beyond the conditions specified above, it may cause a failure of the unit.
4
NORMAL SOUNDS
High Pitched Chatter
High efficiency compressors may have a high pitched chatter during the cooling cycle.
Vibration
Unit may vibrate and make noise because of poor wall or window construction or incorrect installation.
Sound of Rushing Air
At the front of the unit, you may hear the sound of rushing air being moved by the fan
Pinging or Switching
Droplets of water hitting condenser during normal operation may cause pinging or switching sounds.
Gurgling or hissing noise may be heard due to refrigerant passing through evaporator during normal operation.
NOTE: All the pictures in this manual are for explanation purposes only. The actual shape of the air conditioner you purchased may be slightly different, but the operations and functions are almost the same.
AIR CONDITIONER FEATURES
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panels as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the
unit control alone or with the remote control.
Gurgle/Hiss
ADJUSTS TEMPERATURE OR TIME
ACTIVATES TIMER
CHECK FILTER RESET BUTTON
SETS MODE
TTeemmpp
TTi i mme err
On On
Timer Timer
Check Check
CleanClean
Filter Filter
AutoAuto LowLowAutoAuto
AirAir
CoolCool
Mode Mode
Fan Fan Dry Dry
T T eemmpp
TTiimmeerr
OffOff
SleepSleep
Med Med HighHigh
ADJUSTS TEMPERATURE OR TIME
DISPLAYS TEMPERATURE OR TIME
CLEAN AIR MODE (on some models)
SLEEP MODE
SET FAN SPEED
Fan Fan
FOLLOW ME INDICATOR (on some models)
ENERGY SAVER MODE
Follow Follow
Energy Energy
Saver Saver
Me Me
On/OffOn/Off
UNIT CONTROL(1)
5
TURNS UNIT ON OR OFF
Loading...
+ 12 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use