Pepperl Fuchs NJ1.5-PD-E02-1.250-V95 Data Sheet
Inductive sensor NJ1.5-PD-E02-1.250-V95
Technical Data
General specifications
Switching element function NPN & PNP, NO
Model Number
NJ1.5-PD-E02-1.250-V95
Proximity switch
Features
•4-wire DC
• Weld Immune
• Sensing range 1.5 mm
• 3000 psi rating
Accessories
V95-G-YE2M-STOOW
Female cordset, 7/8" - 16 UNF, 5-pin, PUR cable
Rated operating distance s
Installation flush
Output polarity DC
Assured operating distance sa0 ... 1.21 mm
Reduction factor r
Reduction factor r
Nominal ratings
Operating voltage UB10 ... 30 V DC
Switching frequency f 30 Hz
Hysteresis H 10 ... 20 typ. 15 %
Reverse polarity protection yes
Short-circuit protection yes
Vol tag e d rop U
Operating current I
Off-state current I
No-load supply current I
Mag. Field strength, AC fields 250 mT
Mag. Field strength, DC fields 100 mT
Limit data
Operating pressure dynamically 3000 psi
Indicators/operating means
LED green Power on
LED yellow Output status
Standa rd c on for mity
Standards EN 60947-5-2
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type Connector 7/8"-16 UN , 5-pin
Degree of protection IP67
Material Housing: zinc
Note X = 1.250 in (31.8 mm)
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
0.4
Al
0.85
304
Dimensions
1.5 mm
n
d
≤ 2 V DC
≤ 200 mA
L
r
≤ 100 µA
0
≤ 35 mA
Probe: aluminum
Ø48
35
34.5
Ø31.75
Ø25
Ø12.7
LEDs
15.06
2 x
Ø6.5
7/8"-16
37.5
26.5
"X"
Release date: 2015-03-06 20:41 Date of issue: 2015-03-06 904455_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Inductive sensor NJ1.5-PD-E02-1.250-V95
Electrical Connection
Pinout
Wire colors
1 WH
2 RD
4 OR
5 BK
1
L+
2
4
5
1
L-
5
2
4
3
NPT Type Mounting Holes:
1000 and 3000 psi NPT Types:
Mounting hole screw thread
shall be 1/4" - 20.
Minimum thread engagement
depth is 0.250" (6.35 mm)
Hole spacing is 35 mm
center to center.
Mounting Screws:
Standard 1000 and 3000 psi
models use two, self-locking 1/4"- 20 socket head cap
screws (provided).
Recommended tightening torque: 150 in lb (16.95 N-m).
Important: When using spacers, make
certain to maintain the 0.250" (6.35 mm) minimum
mounting screw thread engagement.
Sensor through-hole Mounting hole (x2)
Mounting
hole spacing
Cylinder End-Cap Overhead View
Release date: 2015-03-06 20:41 Date of issue: 2015-03-06 904455_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...