Pentax RCWL2200, RCWL2200A Installation Information
RCWL2200A
69-2111EFS-01
Wireless MyChimeTM Door Chime, Software and
Customizable Sound Card
Installation
Instructions
Installation Instructions
BATTERY
COMPARTMENT C
BATTERY
COMPARTMENT A
BATTERY
COMPARTMENT B
HANGING
SLOT
VOLUME CONTROL
CODE DIAL
FIXING HOLES
USB SOUND
CARD SLOT
Supports Windows 2000 and XP
Safety
Before proceeding with the installation, please note the following safety warnings:
• Always follow the manufacturer’s advice when using power tools and wear
suitable protective equipment (e.g. safety goggles) when drilling holes, etc.
• Before drilling holes in walls, check for hidden electricity cables and water pipes.
The use of a cable/pipe locator is advisable if in doubt.
69-2111EFS—01 ii
RCWL2200
1. Install batteries. Push batteries (2 x AAA) not included. Chime batteries 3x C cell,
not included.
2. Choose a code between 1 & 16. Apply the same code for push and chime.
1 69-2111EFS—01
Installation Instructions
150 FT MAX
50 M MAX
3. Test your Chime and push.
4. Volume Control—Push button.
69-2111EFS—01 2
5. Selecting your standard tune.
RCWL2200
Switch A
3 69-2111EFS—01
Switch B
Switch A
Position
3 Plays list of pre-
2 Westminster 8 note Westminster 8 note
1 Ding Dong Dong Ding Dong Dong
To change
your tune
Switch B at
Position 2
recorded songs one
after the other.
Switch B to
position 2
Play through your
list of tunes by
pressing the push
until desired tune is
reached, then…
Switch B at
Position 1
Plays the same
selected tune.
Switch B to
position 1
this selects the
desired tune.
Installation Instructions
6. How to download tunes to your USB Soundcard:
Insert the CD and USB sound card into your computer. Click on the Help
dropdown for instructions on how to download tunes to your USB Soundcard.
The sound properties of this Door Chime work best with
acoustic music clips.
You can download:
MP3 sound files, Midi (type 0 and 1 only), and Wav (PCM
only)
Soundcard Size: 4 MB Memory.
There are many types of Wav files available on the Web.
The most basic is Wav PCM.
If you have a Wav that does not work in the Chimes editing program it may be a
non PCM Wav file.
More advice can be found at: http://yourhome.honeywell.com
69-2111EFS—01 4
7. Fit your uploaded USB Card into your Chime.
8. Playing your own downloaded tunes: Follow the instructions in
sections 6-7, then follow instructions in table below.
RCWL2200
Switch A
Switch B at Position 2 Switch B at Position 1
Position
3 Plays list of pre-recorded
Plays the same selected tune.
songs one after the other.
2 Westminster 8 note Westminster 8 note
1 Ding Dong Dong Ding Dong Dong
5 69-2111EFS—01
Installation Instructions
150 FT MAX
50 M MAX
9. Mounting your Chime and Push
Drill two 1/4-in. (5 mm) fixing holes for mounting the push
back plate.
Do not mount on or next to a metal surface.
69-2111EFS—01 6
RCWL2200
Dense walls and metal can reduce range, before final installation adjust distance and
position between push and chime while operating the push to optimize the chime
within your environment.
Wall Type Range Reduction
Dry-lined partition wall 10–30%
Single-layer brick wall 20–40%
Double-layer brick wall 30–70%
Metal panel/radiator 90–100%
7 69-2111EFS—01
Installation Instructions
Troubleshooting
“My Chime does not work…”
Make sure the batteries are fitted correctly + / - polarity.
Replace batteries every 12-18 months. Only use alkaline batteries.
Make sure push and Chime are within range, see section 9.
Check that the dial code on the bell push and chime are set at the same position. See
section 2.
Chime does not play tune selected:
Ensure you have selected the right options – see section 5-6.
Support website link: http://yourhome.honeywell.com - with automatic updates.
Disposal and Recycling
At the end of their useful life the packaging and product should be disposed
of via a suitable Recycling Center. Do not dispose of as normal household
waste. DO NOT BURN.
Check with your local authority or retailer for recycling advice.
69-2111EFS—01 8
RCWL2200
Declaration
Honeywell hereby declares that this product complies with Part 15 of the FCC rules
and Industrial Canada standards. This device operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interfer-
ence that may cause undesired operation.
Caution:
Changes or modification not expressly approved by the party responsible for regula-
tory compliance could void the user’s authority to operate the equipment.
Guarantee
Honeywell guarantees this product for 1 year from the date of purchase. Proof of purchase is required: this does not affect your statutory rights. If you require further information about your product call the Honeywell help line at 1-800-468-1502.
9 69-2111EFS—01
Loading...