Pentair Myers User Manual

MYERS

PROFESSIONAL

WATER SYSTEMS

PUMPS, TANKS, MOTORS AND CONTROLS

WWW.FEMYERS.COM

PENTEK® XE SERIES

Performance Proven Line-Up

Performance Proven Myers Now Feature the Pentek XE Series Motors.

Engineered for extra efficiency

and durability.

2-wire permanent split capacitor

design draws up to 22% fewer amps, patented toroidal capacitor reduces vibration and noise.

Pumps supplied with the XE Series

Motor are factory tested and comply with CSA CUS safety certifications.

3-wire motors, when operated

with a Pentek SMC-CR control box, draw 22% fewer amps, due to superior motor and controls technology.

4” Submersibles

UP TO

LOWER

AMP DRAW

FINALLY, A MOTOR AS TOUGH AS OUR PUMPS

Table of Contents

4” SUBMERSIBLE PUMPS

Predator Plus 4” Submersible Pumps.............................. 2-8

The Rustler 4” Submersible Pumps................................ 9-13

S Series Submersible Pumps ........................................ 14-20

The Ranger 4” Submersible Pumps .............................. 21-24

SUBMERSIBLE MOTORS and MOTOR COnTROLS

Pentek® XE Series 4” Submersible

Motors ........................................................................ 25-27

Cable Selection ............................................................... 28-29

Submersible Motor Controls .......................................... 30-31

Single-Phase Protectors ......................................................32

The Insider SPP-111P and SPP-231P ................................. 33

SPP-111-3RLP, SPP-233P and SPP-235P .........................34

The Informer Pump Protection ............................................ 35

Pentek Intellidrive

Pentek Intellikit

™

.......................................................... 36-37

™

............................................................. 38-39

PPC3 and PPC5 .............................................................. 40-41

6” Hitachi

6” Pentek

Submersible Motor ..................................... 42-44

Submersible Motor ..................................... 45-46

JET PUMPS

MPN Series Shallow Well ............................................... 47-48

Quick Draw Shallow Well................................................ 49-50

MPL Series ....................................................................... 51-52

HR Series ......................................................................... 53-54

HJ Series Convertible ..................................................... 55-58

HC and HCM Series ........................................................ 59-62

CEnTRIFUGaL PUMPS

Quick Prime Self-Priming 3/4 – 3 HP ............................ 78-79

Quick Prime Self-Priming 5 HP ..................................... 80-81

QP Series Field Assembly Kits ............................................. 82

PQP Series ....................................................................... 83-84

CT Series – Crusader ...................................................... 85-86

Centri-Thrift ..................................................................... 87-90

BOOSTER PUMPS

MPB Series Servicable High Pressure

Booster ....................................................................... 91-94

UTILITY PUMPS

MSP Swimming Pool Pumps ......................................... 95-96

Composite Engine-Driven

Self-Priming Pump ................................................... 97-98

MES106 Utility Transfer Pump ............................................. 99

aCCESSORIES

Pressure Switches ..............................................................100

Valves and Regulators ................................................ 100-101

Well Adapters, Seals ........................................................... 102

GEnERaL InFORMaTIOn

Pipe Friction Loss Charts ........................................... 103-104

Cable Selection Guide – Hitachi

6"-8" Submersible Motors ................................... 105-108

Cable Selection Guide – Pentek®

6" Submersible Motors

........................................... 109-110

TanKS

Pro-Source® Fibrewound Pressure ............................... 63-65

Pro-Source Fibrewound ................................................. 66-67

Pro-Source Plus Premium Steel

Pressurized ................................................................ 68-70

Pro-Source Steel Pressurized ....................................... 71-75

Pro-Source Steel EpoxyLined ........................................ 76-77

Noryl® is a registered trademark of the General Electric Company.

Nylatron

is a registered trademark of The Polymer Corporation.

Teflon

is a registered trademark of E. I. du Pont de Nemours and Company

is a registered trademark of Hitachi Industrial Equipment Systems Co., Ltd.

Hitachi

All other brand or product names are trademarks or registered trademarks of Pentair Ltd.

4” SUBMERSIBLE PUMPS

Predator Plus

The Predator Plus Series 4” submersible pumps have a proven track record for reliability and performance, and are the preferred brand by many industry professionals. Stainless steel construction and self-lubricating impellers provide reliable performance under the most demanding conditions. The Predator Plus also features the Pentek

XE Series, high-thrust motor for increased efficiency and extended service life.

APPLICATIONS

n Water systems…residential,

industrial, commercial, multiple housing and farm clean water use.

SPECIFICATIONS

Shell – 300 Series Stainless Steel

Discharge – 300 Series Stainless Steel

Discharge Bearing – Nitrile rubber

Impellers – Engineered composite

Diffusers – Engineered composite

Suction Caps – Engineered composite

Shaft and Coupling – 300

Series Stainless Steel

Intake – 300 Series Stainless Steel

Intake Screen – 300 Series

Stainless Steel

Cable Guard – 300 Series Stainless Steel

Internal Check Valve – Spring loaded

Fasteners – 304 Stainless Steel

FEATURES

Nothing Better – Top-of-the-line 4”

submersible pump is unequalled in the marketplace.

Stainless Steel – Shell, discharge bowl, shaft and coupling, wear ring and suction screen – all lead-free.

Gritty Performance – Self-lubricating impellers resist abrasion from grit and sand – Teflon proven to outlast the competition.

Supreme Power – Features the highthrust Pentek XE motor for the ultimate in power, efficient performance and longer life. Thermal overload and lightning protected.

On the Job – Field serviceable, threaded pump assembly.

An Eye for Safety – Built-in eyelet for safety line connection.

impregnated staging

Teflon® is a registered trademark of E. I. du Pont de Nemours and Company

All other brand or product names are trademarks or registered trademarks of Pentair Ltd.

M9108WS

4” SUBMERSIBLE PUMPS

Predator Plus

OUTLINE DIMENSIONS

Pump

End

Length

Assembled

Pump Length

Pump

3.78”

Width

CABLE SELECTION

THREE WIRE CABLE, 60 Hz (Service Entrance to Motor –Maximum Length in Feet)

Motor Rating Wire Size, AWG

HP Volt 14 12 10 8 6 4 3 2 1 0 00

CSIR Control Boxes

1/2 115 87 138 221 349 544 867 1090 1376 1734 2188 2761 1/2 230 348 553 883 1398 2175 3467 4359 5505 6935 8753 – 3/4 230 264 420 670 1061 1651 2632 3309 4178 5264 6644 8383

1 230 226 359 573 908 1413 2252 2831 3575 4504 5685 7173

CSCR Control Boxes

1/2 230 447 711 1135 1797 2796 4458 5604 7078 8916 11254 – 3/4 230 348 553 883 1398 2175 3467 4359 5505 6935 8753 11044

1 230 304 484 772 1223 1903 3034 3814 4817 6068 7659 9663

1 1/2 230 197 314 501 793 1234 1968 2474 3124 3936 4968 6268

2 230 180 286 456 722 1123 1790 2251 2843 3581 4520 5703 3 230 133 211 337 534 830 1324 1664 2102 2648 3342 4217 5 230 – – 206 326 507 809 1017 1284 1618 2042 2577

TWO WIRE CABLE, 60 Hz (Service Entrance to Motor –Maximum Length in Feet)

Motor Rating Wire Size, AWG

HP Volt 14 12 10 8 6 4 3 2 1 0 00

1/2 115 115 183 293 463 721 1150 1445 1825 2299 2902 3662 1/2 230 466 742 1183 1874 2915 4648 5843 7379 9295 11733 – 3/4 230 342 545 869 1376 2141 3413 4291 5419 6826 8617 10871

1 230 241 383 611 968 1506 2400 3018 3811 4801 6060 7646

1 1/2 230 199 317 505 801 1246 1986 2496 3153 3972 5013 6325

M9108WS

4” SUBMERSIBLE PUMPS

Predator Plus

ORDERING INFORMATION

Motor

GPM

Type HP Stg. PH Volt

1/2 11 1 115 2ST51-5PLUS-P4 22-1/2 36 ST5-5PLUS 13 P42B0005A1

1/2 11 1

2-Wire

3-Wire

2-Wire

3-Wire

2-Wire

3-Wire

*Length and weight are approximate.

3/4 15 1 2ST72-5PLUS-P4 26-1/2 40 ST72-5PLUS 16 P42B0007A2

1 19 1 2ST102-5PLUS-P4 30-1/2 45 ST10-5PLUS 18-1/2 P42B0010A2

1-1/2 26 1 2ST152-5PLUS-P4 39 54 ST15-5PLUS 23-1/2 P42B0015A2

1/2 11 1 115 3ST51-5PLUS-P4 22-1/2 33 ST5-5PLUS 13 P43B0005A1 —

1/2 11 1

3/4 15 1 3ST72-5PLUS-P4 26-1/2 37 ST72-5PLUS 16 P43B0007A2 SMC-CR0721

1 19 1 3ST102-5PLUS-P4 30-1/2 43 ST10-5PLUS 18-1/2 P43B0010A2 SMC-CR1021

1-1/2 26 1 3ST152-5PLUS-P4 39 52 ST15-5PLUS 23-1/2 P43B0015A2 SMC-CR1521

1/2 9 1 115 2ST51-8PLUS-P4 22 35 ST5-8PLUS 12-1/2 P42B0005A1

1/2 9 1

3/4 12 1 2ST72-8PLUS-P4 26 39 ST7-8PLUS 15 P42B0007A2

1 15 1 2ST102-8PLUS-P4 29-1/2 42 ST10-8PLUS 17-1/2 P42B0010A2

1-1/2 20 1 2ST152-8PLUS-P4 37 49 ST15-8PLUS 21-1/2 P42B0015A2

1/2 9 1 115 3ST51-8PLUS-P4 22 33 ST5-8PLUS 12-1/2 P43B0005A1 —

1/2 9 1

3/4 12 1 3ST72-8PLUS-P4 26 36 ST7-8PLUS 15 P43B0007A2 SMC-CR0721

1 15 1 3ST102-8PLUS-P4 29-1/2 42 ST10-8PLUS 17-1/2 P43B0010A2 SMC-CR1021

1-1/2 20 1 3ST152-8PLUS-P4 35 50 ST15-8PLUS 21-1/2 P43B0015A2 SMC-CR1521

2 24 1 ST20-8PLUS 31 P43B0020A2 SMC-CR2021

3 33 1 ST30-8PLUS 38 P43B0030A2 SMC-CR3021

1/2 7 1 115 2ST51-12PLUS-P4 21 34 ST5-12PLUS 11-1/2 P42B0005A1

1/2 7 1

3/4 9 1 2ST72-12PLUS-P4 24 38 ST7-12PLUS 13-1/2 P42B0007A2

1 11 1 2ST102-12PLUS-P4 27 44 ST10-12PLUS 15 P42B0010A2

1-1/2 16 1 2ST152-12PLUS-P4 34-1/2 51 ST15-12PLUS 19-1/2 P42B0015A2

1/2 7 1 115 3ST51-12PLUS-P4 21 33 ST5-12PLUS 11-1/2 P43B0005A1 —

1/2 7 1

3/4 9 1 3ST72-12PLUS-P4 24 36 ST7-12PLUS 13-1/2 P43B0007A2 SMC-CR0721

1 11 1 3ST102-12PLUS-P4 27 41 ST10-12PLUS 15 P43B0010A2 SMC-CR1021

1-1/2 16 1 3ST152-12PLUS-P4 33 48 ST15-12PLUS 19-1/2 P43B0015A2 SMC-CR1521

2 19 1 ST20-12PLUS 28 P43B0020A2 SMC-CR2021

3 25 1 ST30-12PLUS 33 P43B0030A2 SMC-CR3021

5 37 1 ST50-12PLUS 41-1/2 P43B0050A2 SMC-CR5021

Assembled Pump Pump End Pentek

Catalog Number

2ST52-5PLUS-P4 22-1/2 36 ST5-5PLUS 13 P42B0005A2

230

3ST52-5PLUS-P4 22-1/2 33 ST5-5PLUS 13 P43B0005A2 SMC-CR0521

230

2ST52-8PLUS-P4 22 35 ST5-8PLUS 12-1/2 P42B0005A2

230

3ST52-8PLUS-P4 22 33 ST5-8PLUS 12-1/2 P43B0005A2 SMC-CR0521

230

2ST52-12PLUS-P4 21 34 ST5-12PLUS 11-1/2 P42B0005A2

230

3ST52-12PLUS-P4 21 33 ST5-12PLUS 11-1/2 P43B0005A2 SMC-CR0521

230

Length

Inches*

Weight

Pounds*

Catalog

Number

Length

Inches*

Motor Control Box

Catalog

Number

Catalog

Number

M9108WS

4” SUBMERSIBLE PUMPS

Predator Plus

ORDERING INFORMATION

Motor

GPM

Type HP Stg. PH Volt

1/2 4 1 115 2ST51-20PLUS-P4 19 32 ST5-20PLUS 9-1/2 P42B0005A1

1/2 4 1

2-Wire

3-Wire

*Length and weight are approximate.

3/4 6 1 2ST72-20PLUS-P4 22-1/2 37 ST7-20PLUS 11-1/2 P42B0007A2

1 8 1 2ST102-20PLUS-P4 25-1/2 41 ST10-20PLUS 14 P42B0010A2

1-1/2 11 1 2ST152-20PLUS-P4 32 48 ST15-20PLUS 17 P42B0015A2

1/2 4 1 115 3ST51-20PLUS-P4 19 31 ST5-20PLUS 9-1/2 P43B0005A1 —

1/2 4 1

3/4 6 1 3ST72-20PLUS-P4 22-1/2 34 ST7-20PLUS 11-1/2 P43B0007A2 SMC-CR0721

1 8 1 3ST102-20PLUS-P4 25-1/2 39 ST10-20PLUS 14 P43B0010A2 SMC-CR1021

1-1/2 11 1 3ST152-20PLUS-P4 30-1/2 46 ST15-20PLUS 17 P43B0015A2 SMC-CR1521

2 14 1 ST20-20PLUS 25 P43B0020A2 SMC-CR2021

3 18 1 ST30-20PLUS 29 P43B0030A2 SMC-CR3021

5 29 1 ST50-20PLUS 42 P43B0050A2 SMC-CR5021

Assembled Pump Pump End Pentek

Catalog Number

2ST52-20PLUS-P4 19 32 ST5-20PLUS 9-1/2 P42B0005A2

230

3ST52-20PLUS-P4 19 31 ST5-20PLUS 9-1/2 P43B0005A2 SMC-CR0521

230

Length

Inches*

Weight

Pounds*

Catalog

Number

Length

Inches*

Motor Control Box

Catalog

Number

Catalog

Number

M9108WS

4” SUBMERSIBLE PUMPS

Capacity liters per minute

Predator Plus

PUMP PERFORMANCE  5 GPM PUMP PERFORMANCE  8 GPM

01520105253035

1200

350

02010 30 40 50

1200

3 HP

1000

1-1/2 HP

800

600

1 HP

3/4 HP

400

Total head in feet

200

1/2 HP

0246810

Capacity gallons per minute

300

250

200

150

Total head in meters

100

1000

800

2 HP

1-1/2 HP

600

1 HP

400

Total head in feet

3/4 HP

1/2 HP

200

0246 10 14812

Capacity gallons per minute

PUMP PERFORMANCE  12 GPM PUMP PERFORMANCE  20 GPM

Capacity liters per minute

0255

1200

5 HP

350

0255075 100

1200

350

300

250

200

150

Total head in meters

100

350

1000

3 HP

800

2 HP

600

400

Total head in feet

1-1/2 HP

1 HP

3/4 HP

1/2 HP

200

Capacity gallons per minute

300

250

200

150

Total head in meters

100

1000

800

600

400

Total head in feet

200

5 HP

3 HP

2 HP

1-1/2 HP

1 HP

3/4 HP

1/2 HP

Capacity gallons per minute

300

250

200

150

Total head in meters

100

05202515

M9108WS

4” SUBMERSIBLE PUMPS

Predator Plus

PUMPPERFORMANCE

5 GALLONS PERMINUTE

1/2

3/4 2ST72-5PLUS-P4 3ST72-5PLUS-P4

1 2ST102-5PLUS-P4 3ST102-5PLUS-P4

1-1/2

8 GALLONS PERMINUTE

1/2

3/4 2ST72-8PLUS-P4 3ST72-8PLUS-P4

1 2ST102-8PLUS-P4 3ST102-8PLUS-P4

1-1/2 2ST152-8PLUS-P4 3ST152-8PLUS-P4

2 ST20-8PLUS

3 ST30-8PLUS

2-Wire

Cat. No.

2ST51-5PLUS-P4* 2ST52-5PLUS-P4

2ST152-5PLUS-P4 3ST152-5PLUS-P4

2ST51-8PLUS-P4* 2ST52-8PLUS-P4

12 GALLONS PERMINUTE

2ST51-12PLUS-P4*

1/2

2ST52-12PLUS-P4

3/4 2ST72-12PLUS-P4 3ST72-12PLUS-P4

1 2ST102-12PLUS-P4 3ST102-12PLUS-P4

1-1/2 2ST152-12PLUS-P4 3ST152-12PLUS-P4

2 ST20-12PLUS

3 ST30-12PLUS

All pumps wired for 230 volt operation. Values based on 1” minimum diameter pipe. *These 1/2 HP pumps are available with 115 Volt motors.

3-Wire

Cat. No.

3ST51-5PLUS-P4* 3ST52-5PLUS-P4

3ST51-8PLUS-P4* 3ST52-8PLUS-P4

3ST51-12PLUS-P4* 3ST52-12PLUS-P4

Tank Pres.

20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700

20/40 30/50 40/60

20/40 30/50 40/60 14.5

20/40 30/50 40/60 15.5

20/40 30/50 40/60 15.3

20/40 30/50 40/60 15.4

20/40 30/50 40/60

10.8

14.5

13.0

7.3

10.8

10.1

15.0

13.0

11.5

15.5

14.5

7.3

6.9

11.0

10.1

9.3

13.5

11.5

9.8

15.7

14.5

13.4

7.4

6.9

6.5

10.3

9.3

8.3

10.6

12.0

9.8

14.7

13.4

12.2

15.3

14.5

7.0

6.5

6.3

7.3

9.5

8.3

7.1

10.6

10.0

10.3

7.2

13.7

12.2

10.9

15.5

14.5

13.5

6.6

6.2

5.6

7.4

7.1

8.5

7.2

5.7

10.7

10.0

9.5

10.9

8.0

12.6

10.9

9.4

14.7

13.5

12.6

Pumping Depth in Feet

6.2

5.8

5.7

5.2

4.6

7.4

7.2

6.8

6.7

6.5

7.4

7.5

6.0

5.8

10.2

9.6

9.5

8.8

8.0

11.0

9.4

7.5

10.5

10.0

9.8

7.5

12.7

11.6

10.5

15.4

14.9

10.6

10.0

11.9

10.5

15.6

14.9

14.3

10.9

10.5

11.2

13.7

12.6

11.6

5.3

4.6

3.9

6.8

6.6

6.2

7.4

7.2

9.0

8.0

7.1

9.5

8.0

9.2

3.7

6.1

5.7

5.3

7.1

6.8

6.6

6.8

5.5

9.3

8.7

8.1

11.1

10.7

10.5

8.7

14.2

13.4

12.8

15.0

14.5

5.3

4.8

4.3

6.5

6.3

6.0

7.3

7.4

7.3

7.9

7.0

6.2

10.4

10.0

9.6

11.0

10.8

12.6

11.7

11.0

14.5

13.8

13.3

4.2

3.5

5.9

5.6

5.3

6.9

7.0

6.8

5.8

4.7

9.5

9.0

8.5

10.8

10.5

10.1

10.8

9.7

8.8

13.1

12.5

11.9

15.2

14.9

5.3

4.9

4.6

6.5

6.6

6.5

8.4

7.7

7.3

10.0

9.7

9.3

8.5

11.7

10.9

10.2

14.8

14.3

13.9

4.4

3.9

3.4

6.0

6.2

6.0

7.2

6.3

5.7

9.2

8.9

8.4

11.0

10.9

10.0

9.0

8.3

13.8

13.3

12.9

3.3

2.5

5.5

5.7

5.5

4.6

8.3

7.9

7.3

10.8

10.6

10.4

8.0

12.7

12.2

11.7

5.0

5.2

5.0

7.2

6.7

6.0

10.3

10.1

9.8

11.6

11.0

10.5

4.4

4.7

4.4

6.0

5.4

9.8

9.5

9.2

10.5

9.7

9.1

3.6

4.0

3.6

9.1

8.9

8.5

9.0

2.4

3.0

2.4

8.5

8.2

7.8

750

7.7

7.5

7.0

M9108WS

4” SUBMERSIBLE PUMPS

Predator Plus

PUMPPERFORMANCE

20 GALLONS PERMINUTE

3/4 2ST72-20PLUS-P4 3ST72-20PLUS-P4

1-1/2

2 ST20-20PLUS

3 ST30-20PLUS

5 ST50-20PLUS

2-Wire

Cat. No.

2ST10220PLUS-P4

2ST15220PLUS-P4

3-Wire

Cat. No.

3ST102-20PLUS-P4

3ST152-20PLUS-P4

All pumps wired for 230 volt operation. Values based on 1” minimum diameter pipe. *These 1/2 HP pumps are available with 115 Volt motors.

Tank

Pres.

20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750

20/40

23.5

30/50

21.5

40/60

19.5

20/40 30/50

24.0

40/60

23.0

20/40 30/50 40/60 24.5

20/40 30/50 40/60 23.6

20/40 30/50 40/60 24.0

20/40 30/50 40/60

22.0

19.5

16.0

24.5

23.0

21.5

20.0

16.0

23.0

21.5

20.0

24.5

23.5

17.0

22.0

20.0

17.5

24.5

23.5

22.5

20.5

17.5

14.5

23.5

22.5

21.5

18.0

14.5

22.5

21.5

20.0

23.6

23.0

15.5

21.5

20.0

18.5

23.6

23.0

22.2

Pumping Depth in Feet

20.5

19.0

16.5

14.5

22.4

21.3

20.4

24.5

23.1

17.0

14.5

12.5

21.5

20.5

19.3

23.7

22.5

18.5

16.5

23.0

22.2

21.3

23.7

23.6

19.0

17.0

15.5

22.4

21.0

15.0

20.8

18.8

24.4

24.0

18.5

15.5

15.8

24.0

23.6

23.3

15.4

23.2

22.8

22.4

22.3

22.0

21.4

21.5

20.8

20.2

20.0

19.5

18.8

18.7

17.7

17.0

16.0

15.0

M9108WS

4” SUBMERSIBLE PUMPS

The Rustler

The Rustler 4” submersible pump is one of the most popular models in the Myers

line. They have an exceptional history of durability and trouble-free operation. Stainless steel design and self-lubricating impellers offer the best service for extreme conditions. The Rustler also includes the Pentek

XE Series, high-thrust motor for efficient performance and years of extended service.

APPLICATIONS

n Water systems… residential,

industrial, commercial, multiple housing and farm clean water use

SPECIFICATIONS

Shell – 300 Series Stainless Steel

Discharge – High-density composite resin

Discharge Bearing – Nylatron

Impellers – Engineered composite

Diffusers – Engineered composite

Suction Caps – Engineered composite

Shaft and Coupling – 300

Series Stainless Steel

Intake Screen – Highdensity composite resin

Cable Guard – PVC

Check Valve – Acetal

Fasteners – 300 Series Stainless Steel

FEATURES

Leading Performer – Premium 4”

submersible pump series field proven and preferred by industry pros.

True Grit – Self-lubricating impellers

resist abrasion from grit and sand – outlasts the competition.

Awesome Power – Features the

high-thrust Pentek XE motor for the ultimate in power, efficient performance and longer life. Thermal overload and lightning protected.

Built-in Safety – Built-in eyelet for

safety line connection.

Nylatron® is a registered trademark of The Polymer Corporation. All other brand or product names are trademarks or registered trademarks of Pentair Ltd.

M9109WS

4” SUBMERSIBLE PUMPS

Width

The Rustler

OUTLINE DIMENSIONS

Pump

Length

End

Assembled

Pump Length

Pump

CABLE SELECTION

THREE WIRE CABLE, 60 Hz (Service Entrance to Motor –Maximum Length in Feet)

Motor Rating AWG Copper Wire Size

Volts HP 14 12 10 8 6 4 3 2 1 0 00

115 1/2 87 138 221 349 544 867 1090 1376 1734 2188 2761

1/2 348 553 883 1398 2175 3467 4359 5505 6935 8753 11044

230

TWO WIRE CABLE, 60 Hz (Service Entrance to Motor –Maximum Length in Feet)

Motor Rating AWG Copper Wire Size

Volts HP 14 12 10 8 6 4 3 2 1 0 00

115 1/2 115 183 293 463 721 1150 1445 1825 2299 2902 3662

230

3/4 264 420 670 1061 1651 2632 3309 4178 5264 6644 8383

1 226 359 573 908 1413 2252 2831 3575 4504 5685 7173

1-1/2 197 314 501 793 1234 1968 2474 3124 3936 4968 6268

1/2 466 742 1183 1874 2915 4648 5843 7379 9295 11733 14803 3/4 342 545 869 1376 2141 3413 4291 5419 6826 8617 10871

1 241 383 611 968 1506 2400 3018 3811 4801 6060 7646

1-1/2 199 317 505 801 1246 1986 2496 3153 3972 5013 6325

M9109WS

4” SUBMERSIBLE PUMPS

The Rustler

ORDERING INFORMATION

GPM Motor Type HP Stg. PH Volt

1/2 11 1 115 2NFL51-5-P4 24-3/4 33 N55R 15-1/4 P42B0005A1

2-Wire

3-Wire

2-Wire

3-Wire

2-Wire

3-Wire

2-Wire

3-Wire

1/2 11 1

3/4 15 1 2NFL72-5-P4 28-3/4 35 N75R 18 P42B0007A2

1 19 1 2NFL102-5-P4 32-1/2 42 N105R 20-3/4 P42B0010A2

1/2 11 1

3/4 15 1 3NFL72-5-P4 28-3/4 34 N75R 18 P43B0007A2 SMC-CR0721

1 19 1 3NFL102-5-P4 32-1/2 39 N105R 20-3/4 P43B0010A2 SMC-CR1021

1/2 9 1 115 2NFL51-8-P4 24-1/2 31 N58R 15 P42B0005A1

1/2 9 1

3/4 12 1 2NFL72-8-P4 27-3/4 35 N78R 17 P42B0007A2

1 15 1 2NFL102-8-P4 31-1/2 40 N108R 19-3/4 P42B0010A2

1-1/2 20 1 2NFL152-8-P4 38-3/4 49 N158R 23-1/2 P42B0015A2

1/2 9 1 115 3NFL51-8-P4 24-1/2 29 N158R 15 P43B0005A1 SMC-IR0511

1/2 9 1

3/4 12 1 3NFL72-8-P4 27-3/4 33 N78R 17 P43B0007A2 SMC-CR0721

1 15 1 3NFL102-8-P4 31-1/2 37 N108R 19-3/4 P43B0010A2 SMC-CR1021

1-1/2 20 1 3NFL152-8-P4 37 39 N158R 23-1/2 P43B0015A2 SMC-CR1521

1/2 7 1 115 2NFL51-12-P4 23-1/4 29 N512R 13-3/4 P42B0005A1

1/2 7 1

3/4 9 1 2NFL72-12-P4 26-1/4 34 N712R 15-1/2 P42B0007A2

1 11 1 2NFL102-12-P4 29 38 N1012R 17-1/4 P42B0010A2

1-1/2 16 1 2NFL152-12-P4 36-3/4 45 N1512R 21-1/2 P42B0015A2

1/2 7 1 115 3NFL51-12-P4 23-1/4 28 N512R 13-3/4 P43B0005A1 SMC-IR0511

1/2 7 1

3/4 9 1 3NFL72-12-P4 26-1/4 33 N712R 15-1/2 P43B0007A2 SMC-CR0721

1 11 1 3NFL102-12-P4 29 36 N1012R 17-1/2 P43B0010A2 SMC-CR1021

1-1/2 16 1 3NFL152-12-P4 35 43 N1512R 21-1/2 P43B0015A2 SMC-CR1521

3/4 6 1

1 8 1 2NFL102-20-P4 27-1/2 36 N1020R 15-3/4 P42B0010A2

1-1/2 11 1 2NFL152-20-P4 34-1/4 43 N1520R 19 P42B0015A2

3/4 6 1 3NFL72-20-P4 25-1/2 31 N720R 13-3/4 P43B0007A2 SMC-CR0721

1 8 1 3NFL102-20-P4 27-1/2 35 N1020R 15-3/4 P43B0010A2 SMC-CR1021

1-1/2 11 1 3NFL152-20-P4 32-1/2 41 N1520R 19 P43B0015A2 SMC-CR1521

Assembled Pump Pump End Pentek

Catalog Number

2NFL52-5-P4 24-3/4 33 N55R 15-1/4 P42B0005A2

230

115

3NFL51-5-P4 24-3/4 30 N55R 15-1/4 P43B0005A1 SMC-IR0511

3NFL52-5-P4 24-3/4 30 N55R 15-1/4 P43B0005A2 SMC-CR0521

230

2NFL52-8-P4 24-1/2 31 N58R 15 P42B0005A2

230

3NFL52-8-P4 24-1/2 29 N58R 15 P43B0005A2 SMC-CR0521

230

2NFL52-12-P4 23-1/4 29 N512R 13-3/4 P42B0005A2

230

3NFL52-13-P4 23-1/4 28 N512R 13-3/4 P43B0005A2 SMC-CR0521

230

2NFL72-20-P4 25-1/2 31 N720R 13-3/4 P42B0007A2

230

Length

Inches*

Weight

Pounds*

Catalog

Number

Length

Inches*

Motor Control Box

Catalog

Number Catalog Number

*Length and weight are approximate.

M9109WS

4” SUBMERSIBLE PUMPS

Capacity liters per minute

The Rustler

PUMP PERFORMANCE  5 GPM PUMP PERFORMANCE  8 GPM

01520105253035

700

1 HP

600

3/4 HP

500

400

1/2 HP

300

Total head in feet

200

100

06824 10

Capacity gallons per minute

200

150

100

Total head in meters

02010 30 40 50

700

600

500

400

300

Total head in feet

200

100

1-1/2 HP

1 HP

3/4 HP

1/2 HP

0246810 12 14

Capacity gallons per minute

PUMP PERFORMANCE  12 GPM PUMP PERFORMANCE  20 GPM

Capacity liters per minute

0255

700

600

1-1/2 HP

500

400

300

Total head in feet

200

100

1 HP

3/4 HP

1/2 HP

200

150

100

Total head in meters

400

1-1/2 HP

350

300

1 HP

250

3/4 HP

200

150

Total head in feet

100

4020 60 80 100

200

150

100

Total head in meters

120

100

Total head in meters

0481

Capacity gallons per minute

016

05 15 252010 30

Capacity gallons per minute

M9109WS

4” SUBMERSIBLE PUMPS

The Rustler

PUMP PERFORMANCE

5 GALLONS PERMINUTE

1/2

3/4 2NFL72-5-P4 3NFL72-5-P4

1 2NFL102-5-P4 3NFL102-5-P4

8 GALLONS PERMINUTE

1/2

3/4 2NFL72-8-P4 3NFL72-8-P4

1 2NFL102-8-P4 3NFL102-8-P4

1-1/2 2NFL152-8-P4 3NFL152-8-P4

12 GALLONS PERMINUTE

1/2

3/4 2NFL72-12-P4 3NFL72-12-P4

1 2NFL102-12-P4 3NFL102-12-P4

1-1/2 2

20 GALLONS PERMINUTE

3/4 2NFL72-20-P4 3NFL72-20-P4

1 2NFL102-20-P4 3NFL102-20-P4

1-1/2 2NFL152-20-P4 3NFL152-20-P4

2-Wire

Cat. No.

2NFL51-5-P4* 2NFL52-5-P4

2NFL51-8-P4* 2NFL52-8-P4

2NFL51-12-P4* 2NFL52-12-P4

NFL152-12-P4 3NFL152-12-P4

3-Wire

Cat. No.

3NFL51-5-P4* 3NFL52-5-P4

3NFL51-8-P4* 3NFL52-8-P4

3NFL51-12-P4* 3NFL52-12-P4

Tank Pres.

20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500

20/40 30/50 40/60

20/40 30/50 40/60 14.5

20/40 30/50 40/60 15.5

20/40 30/50 40/60 15.3

20/40 30/50 40/60 15.4

20/40 30/50 40/60

20/40 30/50 40/60 24.5

23.5

21.5

19.5

24.0

23.0

10.8

14.5

13.0

22.0

19.5

16.0

24.5

23.0

21.5

10.8

10.1

15.0

13.0

11.5

15.5

14.5

20.0

16.0

23.0

21.5

20.0

24.5

23.5

11.0

10.1

9.3

11.1

13.5

11.5

9.8

15.7

14.5

13.4

17.0

22.0

20.0

17.5

24.5

23.5

22.5

6.5

10.3

9.3

8.3

11.1

10.6

12.0

9.8

14.7

13.4

12.2

15.3

14.5

20.5

17.5

14.5

23.5

22.5

21.5

Pumping Depth in Feet

6.6

6.5

6.2

6.3

5.6

9.5

8.5

8.3

7.2

7.1

5.7

11.2

10.7

10.6

10.0

9.5

10.9

10.3

8.0

7.2

13.7

12.6

12.2

10.9

9.4

15.5

14.7

14.5

13.5

12.6

18.0

15.5

14.5

22.5

21.5

20.0

18.5

6.2

5.7

5.2

6.7

7.5

5.8

10.2

9.5

8.8

10.9

10.5

11.2

9.4

7.5

13.7

12.6

11.6

20.5

18.5

16.5

5.8

5.3

4.6

3.9

6.6

6.2

9.0

8.0

7.1

10.6

10.0

9.5

8.0

11.9

10.5

9.2

15.6

14.9

14.3

17.0

14.5

12.5

3.7

6.1

5.3

4.8

4.3

6.5

6.3

6.0

7.9

7.0

6.2

10.4

10.0

9.6

12.6

11.7

11.0

4.2

3.5

5.9

5.6

5.3

5.8

4.7

9.5

9.0

8.5

10.8

9.7

8.8

5.7

5.3

6.6

6.8

5.5

9.3

8.7

8.1

11.1

10.7

10.5

8.7

14.2

13.4

12.8

5.2

4.6

6.5

6.0

9.6

8.8

8.0

11.0

10.5

10.0

9.8

7.5

12.7

11.6

10.5

15.4

14.9

19.0

16.5

14.5

5.3

4.9

4.6

8.4

7.7

7.3

8.5

4.4

3.9

3.4

7.2

6.3

5.7

3.3

2.5

5.5

4.6

All pumps wired for 230 volt operation. Values based on 1” minimum diameter pipe. *These 1/2 HP pumps are available with 115 Volt motors.

M9109WS

4” SUBMERSIBLE PUMPS

S Series

The S Series 4” submersibles have been a successful entry in the Myers well pump line for many years and have a history of tremendous reliability. The all stainless steel construction is ideal for extreme water conditions and easily resists harmful corrosion. The S Series subs are also available with high-performance Pentek motors for the very best in efficiency and trouble-free operation.

APPLICATIONS

n Water systems… residential,

industrial, commercial, multiple housing and farm clean water use

SPECIFICATIONS

Straps – 300 Series Stainless Steel

Discharge – 300 Series Stainless Steel

Discharge Bearing – Rubber

Impellers – 300 Series Stainless Steel

Diffusers – 300 Series Stainless Steel

Suction Caps – 300 Series

Stainless Steel

Shaft and Coupling – 300 Series Stainless Steel

Intake – 300 Series Stainless Steel

Intake Screen – 300 Series

Stainless Steel Stainless Steel

Cable Guard – 300 Series Stainless Steel Stainless Steel

Check Valve – 300 Series Stainless Steel

Fasteners – 300 Series Stainless

Steel Stainless Steel

FEATURES

Smooth and Quiet – Precision-

crafted, 4” submersible well pumps for quieter operation.

Stainless Steel Everywhere – Shell, impellers, discharge bowl, shaft and coupling, wear ring and suction screen.

Tough in Any Situation – Stainless steel impellers stand tough against sand and grit – nothing but the best.

All Powerful – Features applicationmatched Pentek motors for just the right mix of performance and efficiency.

No Slip-ups – Built-in hook assembly keeps pump safe from slip.

M9110WS

4” SUBMERSIBLE PUMPS

S Series

ORDERING INFORMATION

Assembled Pump Pump End Pentek

GPM

*Length and weight are approximate. DISCHARGE SIZES:

• The 5, 10 and 16 gallon SST pumps have 1-1/4” discharge

• The 25, 40 and 75 gallon SST pumps have 2” discharge

Motor

Type HP Volt

2-Wire

3-Wire

2-Wire

3-Wire

2-Wire

3-Wire

Catalog Number

1/2 3/4 2S72-5-P4 31-1/2 33 S7-5 21 P42B0007A2

1 2S102-5-P4 36-1/4 38 S10-5 24-1/4 P42B0010A2

1-1/2 2S152-5-P4 45-1/8 48 S15-5 29-5/8 P42B0015A2

1/2 3/4 3S72-5-P4 31-1/2 33 S7-5 21 P43B0007A2 SMC-CR0721

1 3S102-5-P4 36-1/4 38 S10-5 24-1/4 P43B0010A2 SMC-CR1021

1-1/2 3S152-5-P4 43-1/8 48 S15-5 29-5/8 P43B0015A2 SMC-CR1521

2 S20-5 40-3/4 P43B0020A2 SMC-CR2021 3 S30-5 50-1/8 P43B0030A2 SMC-CR3021

1/2 115 2S51-10-P4 23 25 S5-10 13-1/2 P42B0005A1 1/2 3/4 2S72-10-P4 26-1/2 29 S7-10 16 P42B0007A2

1 2S102-10-P4 30-1/2 33 S10-10 18-1/2 P42B0010A2

1-1/2 2S152-10-P4 39 43 S15-10 23-1/2 P42B0015A2

1/2 115 3S51-10-P4 23 25 S5-10 13-1/2 P43B0005A1 SMC-CR0511 1/2 3/4 3S72-10-P4 26-1/2 29 S7-10 16 P43B0007A2 SMC-CR0721

1 3S102-10-P4 30-1/2 33 S10-10 18-1/2 P43B0010A2 SMC-CR1021

1-1/2 3S152-10-P4 37 43 S15-10 23-1/2 P43B0015A2 SMC-CR1521

2 S20-10 30-3/8 P43B0020A2 SMC-CR2021 3 S30-10 36-1/4 P43B0030A2 SMC-CR3021 5 S50-10 48-1/8 P43B0050A2 SMC-CR5021

1/2 115 2S51-16-P4 21-3/4 23 S5-16 12-1/2 P42B0005A1 1/2 3/4 2S72-16-P4 23-1/4 27 S7-16 12-3/4 P42B0007A2

1 2S102-16-P4 28-3/8 31 S10-16 16-3/8 P42B0010A2

1-1/2 2S152-16-P4 33-1/8 42 S15-16 17-5/8 P42B0015A2

1/2 115 3S51-16-P4 21-3/4 23 S5-16 12-1/4 P43B0005A1 SMC-CR0511 1/2 3/4 3S72-16-P4 23-1/4 27 S7-16 13-3/4 P43B0007A2 SMC-CR0721

1 3S102-16-P4 28-3/8 31 S10-16 16-3/8 P43B0010A2 SMC-CR1021

1-1/2 3S152-16-P4 31-1/8 42 S15-16 17-5/8 P43B0015A2 SMC-CR1521

2 S20-16 21 P43B0020A2 SMC-CR2021 3 S30-16 26 P43B0030A2 SMC-CR3021 5 S50-16 39-7/8 P43B0050A2 SMC-CR5021

2S52-5-P4 26-3/8 29 S5-5 16-7/8 P42B0005A2

230

3S52-5-P4 22-3/8 29 S5-5 16-7/8 P43B0005A2 SMC-CR0521

230

2S52-10-P4 23 25 S5-10 13-1/2 P42B0005A2

230

3S52-10-P4 23 25 S5-10 13-1/2 P43B0005A2 SMC-CR0521

230

2S52-16-P4 21-3/4 23 S5-16 12-1/4 P42B0005A2

230

3S52-16-P4 21-3/4 23 S5-16 12-1/4 P43B0005A2 SMC-CR0521

230

Length

Inches*

Weight

Pounds*

Catalog

Number

Length

Inches*

Motor Control Box

Catalog

Number

Catalog

Number

M9110WS

4” SUBMERSIBLE PUMPS

S Series

ORDERING INFORMATION

Assembled Pump Pump End Pentek

GPM

*Length and weight are approximate. DISCHARGE SIZES:

• The 5, 10 and 16 gallon SST pumps have 1-1/4” discharge

• The 25, 40 and 75 gallon SST pumps have 2” discharge

Motor

Type HP Volt

2-Wire

3-Wire

2-Wire

3-Wire

Catalog Number

1/2 3/4 2S72-25-P4 20-3/4 27 S7-25 10-1/4 P42B0007A2

1 2S102-25-P4 23-7/8 31 S10-25 11-7/8 P42B0010A2

1-1/2 2S152-25-P4 29 39 S15-25 13-1/2 P42B0015A2

1/2 3/4 3S72-25-P4 20-3/4 27 S7-25 10-1/4 P43B0007A2 SMC-CR0721

1 3S102-25-P4 23-7/8 31 S10-25 11-7/8 P43B0010A2 SMC-CR1021

1-1/2 3S152-25-P4 27 39 S15-25 13-1/2 P43B0015A2 SMC-CR1521

2 S20-25 15-1/4 P43B0020A2 SMC-CR2021 3 S30-25 18-1/2 P43B0030A2 SMC-CR3021 5 S50-25 27-5/8 P43B0050A2 SMC-CR5021

7-1/2 S75-25 42-3/4 P43B0075A3

1-1/2 2S152-40-P4 31-3/4 42 S15-40 16-1/4 P42B0015A2

1-1/2 3S152-40-P4 29-3/4 42 S15-40 16-1/4 P43B0015A2 SMC-CR1521

2 S20-40 19-1/2 P43B0020A2 SMC-CR2021 3 S30-40 22-7/8 P43B0030A2 SMC-CR3021 5 S50-40 32-3/4 P43B0050A2 SMC-CR5021

7-1/2 S75-40 49-3/8 P43B0075A3

10 S100-40 57-5/8 P43B0100A4

2 S20-75 19-1/4 P43B0020A2 SMC-CR2021 3 S30-75 28-7/8 P43B0030A2 SMC-CR3021 5 S50-75 43-1/4 P43B0050A2 SMC-CR5021

7-1/2 S75-75 62-1/2 P43B0075A3

10 S100-75 86-1/2 P43B0100A4

2S52-25-P4 18-7/8 25 S5-25 8-5/8 P42B0005A2

230

3S52-25-P4 18-1/8 25 S5-25 8-5/8 P43B0005A2 SMC-CR0521

230

2S102-40-P4 24-7/8 32 S10-40 12-7/8 P42B0010A2

230

3S102-40-P4 24-7/8 32 S10-40 12-7/8 P43B0010A2 SMC-CR1021

230

Length

Inches*

Weight

Pounds*

Catalog

Number

Length

Inches*

Motor Control Box

Catalog

Number

Catalog

Number

M9110WS

4” SUBMERSIBLE PUMPS

Capacity liters per minute

S Series

PUMP PERFORMANCE  5 GPM PUMP PERFORMANCE  10 GPM

01520105253035

1400

3 HP

1200

1000

800

600

Total head in feet

400

200

2 HP

1-1/2 HP

1 HP

3/4 HP

1/2 HP

06824 10

Capacity gallons per minute

400

300

200

Total head in meters

100

02010 30 40 50

1400

1200

5 HP

3 HP

1000

800

2 HP

1-1/2 HP

600

1 HP

Total head in feet

400

3/4 HP

1/2 HP

200

0246810 12 14

Capacity gallons per minute

PUMP PERFORMANCE  16 GPM PUMP PERFORMANCE  25 GPM

Capacity liters per minute

020406080

1200

1000

5 HP

350

300

050 100 125 17525 75 150

1200

7-1/2 HP

1000

400

300

200

Total head in meters

100

350

300

800

3 HP

600

2 HP

1-1/2 HP

400

Total head in feet

1 HP

3/4 HP

200

1/2 HP

010

02515

Capacity gallons per minute

250

200

150

Total head in meters

100

800

600

5 HP

3 HP

400

Total head in feet

200

2 HP

1-1/2 HP

1 HP

3/4 HP

1/2 HP

020405010 30

Capacity gallons per minute

250

200

150

Total head in meters

100

M9110WS

4” SUBMERSIBLE PUMPS

Capacity liters per minute

S Series

PUMP PERFORMANCE  40 GPM PUMP PERFORMANCE  75 GPM

050 100 150 200

1000

10 HP

800

7-1/2 HP

600

5 HP

400

Total head in feet

3 HP

2 HP

200

1-1/2 HP

1 HP

Capacity gallons per minute

OUTLINE DIMENSIONS

300

250

200

150

100

Total head in meters

010 40 5030

0 100 200 250 35050 150 300

600

500

400

300

200

Total head in feet

100

04080 10020 60

Discharge

10 HP

7-1/2 HP

5 HP

3 HP

2 HP

Capacity gallons per minute

175

150

125

100

Total head in meters

3-7/8”

Length

Suction

Overall

Staging

Motor

DISCHARGE

GPM NPT

5 1-1/4 10 1-1/4 16 1-1/4 25 2 40 2 75 2

Dimensions (in inches) are for estimating purposes only.

M9110WS

4” SUBMERSIBLE PUMPS

S Series

PUMP PERFORMANCE

2-Wire

Cat. No.

3-Wire

Cat. No.

Tank

Pres.

Pump

End

0 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950

Only

5 GALLONS PERMINUTE

1/2 2S52-5-P4 3S525-P4

3/4 2S72-5-P4 3S72-5-P4 S7-5 6.5 6.3 6.0 5.8 4.8 4.0 3.0

1 2S102-5-P4 3S102-5-P4 S10-5 6.5 5.8 5.3 4.5 3.8 3.0

1-1/2 2S152-5-P4 3S152-5-P4 S15-5 6.3 5.8 5.3 4.5 4.0 3.3

1/2 2S52-5-P4 3S525-P4

3/4 2S72-5-P4 3S72-5-P4 S7-5 6.5 6.3 6.0 5.8 5.3 4.5 3.5

1 2S102-5-P4 3S102-5-P4 S10-5 6.5 6.2 5.5 4.9 4.3 3.3

1-1/2 2S152-5-P4 3S152-5-P4 S15-5 6.5 6.0 5.5 5.0 4.4 3.6 3.0

S5-5 6.5 6.0 5.8 5.3 4.8 4.5 3.8 3.0

10 GALLONS PERMINUTE

1/2 2S52-10-P4 3S52-10-P4

3/4 2S72-10-P4 3S72-10-P4 S7-10 13.2 12.3 11.5 11.0 10.7 9.5 8.5 6.7

1 2S102-10-P4 3S102-10-P4 S10-10 13.3 12.6 12.0 11.4 10.3 8.0 6.0

1-1/2 2S152-10-P4 3S152-10-P4 S15-10 12.6 12.1 11.5 10.5 8.8 7.0

1/2 2S52-10-P4 3S52-10-P4

3/4 2S72-10-P4 3S72-10-P4 S7-10 13.0 12.0 11.2 10.6 9.5 8.5 7.0

1 2S102-10-P4 3S102-10-P4 S10-10 12.7 12.0 11.1 10.3 9.3 7.2

1-1/2 2S152-10-P4 3S152-10-P4 S15-10 13.0 12.2 11.2 9.8 8.3 6.2

S5-10 13.0 12.0 11.0 9.5 8.0 6.5

S5-10 13.0 12.1 11.1 9.5 8.0 6.0

16 GALLONS PERMINUTE

1/2 2S52-16-P4 3S52-16-P4

3/4 2S72-16-P4 3S72-16-P4 S7-16 20.0 18.0 15.0 11.5

1 2S102-16-P4 3S102-16-P4 S10-16 20.5 18.5 17.0 15.5 13.5 11.0

1-1/2 2S152-16-P4 3S152-16-P4 S15-16 20.0 18.8 17.0 14.0

1/2 2S52-16-P4 3S52-16-P4

3/4 2S72-16-P4 3S72-16-P4 S7-16 20.0 18.0 15.5 12.0

1 2S102-16-P4 3S102-16-P4 S10-16 20.5 19.0 17.0 16.0 14.0 11.0

1-1/2 2S152-16-P4 3S152-16-P4 S15-16 20.0 19.0 17.5 16.3 12.0

S5-16 20.5 18.5 16.5 12.0

S5-16 18.5 16.0 12.0

Pumping Depth in Feet

M9110WS

4” SUBMERSIBLE PUMPS

S Series

PUMP PERFORMANCE

2-Wire

Cat. No.

25 GALLONS PERMINUTE

1/2 2S52-25-P4 3S52-25-P4

3/4 2S72-25-P4 3S72-25-P4 S7-25 28.0 24.0 17.0

1 2S102-25-P4 3S102-25-P4 S10-25 33.0 30.0 27.0 22.5 17.0

1-1/2 2S152-25-P4 3S152-25-P4 S15-25 32.0 30.0 28.0 23.0 20.0 14.5

1/2 2S52-25-P4 3S52-25-P4

3/4 2S72-25-P4 3S72-25-P4 S7-25 24.0 18.0

1 2S102-25-P4 3S102-25-P4 S10-25 30.5 27.5 23.0 16.0

1-1/2 2S152-25-P4 3S152-25-P4 S15-25 30.5 28.0 24.5 19.5 14.0

40 GALLONS PERMINUTE

1 2S102-40-P4 3S102-40-P4

1-1/2 2S152-40-P4 3S152-40-P4 S15-40 48.0 36.0 17.0

1 2S102-40-P4 3S102-40-P4

1-1/2 2S152-40-P4 3S152-40-P4 S15-40 47.0 35.0 16.0

3-Wire

Cat. No.

Tank

Pres.

Pump

End

0 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900

Only

S5-25 15.0

S5-25

S10-40 30.0

S10-40

Pumping Depth in Feet

M9110WS

4” SUBMERSIBLE PUMPS

The Ranger

The Ranger Series 4” high-flow submersible pumps are perfect for applications requiring a large volume of water. Stainless steel components and high-density composite resin impellers provide exceptional resistance to corrosion in harsh water conditions. The high-torque motor and superior pump hydraulics are carefully matched to handle virtually any job.

APPLICATIONS

n Water systems… irrigation, industrial,

commercial, multiple housing and farm clean water use

SPECIFICATIONS

Shell – 300 Series Stainless Steel

Discharge – 300 Series Stainless Steel

Discharge Bearing – Buna-N

Impellers – Engineered Composite

Diffusers – Engineered Composite

Suction Caps – Engineered Composite

Shaft and Coupling – 300 Series

Stainless Steel

Intake – 300 Series Stainless Steel

Intake Screen – 300 Series Stainless

Steel

Cable Guard – 300 Series Stainless Steel

Fasteners – 300 Series Stainless Steel

FEATURES

Turn Up the Volume – High-flow

capacities to 100 GPM make the Ranger 4” sub the easy choice for the really big jobs.

More Stainless Steel – Shell, discharge and suction bowl, shaft and coupling, lead guard and suction screen.

Staged for Toughness – Specially designed, high-density thermo-plastic impellers resist the corrosive wear from harsh water conditions.

High-powered Performance – Features a high-torque, heavy-duty motor for the most demanding applications.

M9111WS

4” SUBMERSIBLE PUMPS

The Ranger

ORDERING INFORMATION  PUMP

Assembled Pump

GPM HP Stages

1 7 SS10-25 18 12

1-1/2 9 SS15-25 21 14

2 11 SS20-25 24 15 3 15 SS30-25 30 19 5 25 SS50-25 48 27

7-1/2 37 SS75-25 67 55

1 4 SS10-35 15 10

1-1/2 6 SS15-35 18 12

2 8 SS20-35 22 14 3 11 SS30-35 28 17 5 18 SS50-35 43 24

7-1/2 28 SS75-35 62 52

10 37 SS100-35 75 63

1-1/2 6 SS15-50 21 14

2 7 SS20-50 23 15 3 10 SS30-50 31 19 5 16 SS50-50 48 27

7-1/2 25 SS75-50 70 59

10 32 SS100-50 84 68

2 6 SS20-80 29 16 3 9 SS30-80 39 20 5 14 SS50-80 59 45

7-1/2 22 SS75-80 66 59

10 27 SS100-80 100 69

Catalog Number

Length

Inches*

OUTLINE DIMENSIONS

Weight

Pounds*

Pump Length

MOTOR / CONTROL BOX

Pentek

Motor

No. of

Wires Volts PH

2 230 1 P42B0010A2 12 22

1-1/2

2 3

3 3

5 3

7-1/2 3

10 3 460 3 P43B0100A4 31 78

*Length and weight are approximate.

230 1 P43B0010A2 12 22 SMC-CR1021

460 3 P43B0010A4 12 23

2 230 1 P42B0015A2 15 30

230 1 P43B0015A2 14 27 SMC-CR1521

230 3 P43B0015A3 13 23 460 3 P43B0015A4 12 23 230 1 P43B0020A2 15 29 SMC-CR2021 230 3 P43B0020A3 14 27 460 3 P43B0020A4 14 27 230 1 P43B0030A2 24 49 SMC-CR3021 230 3 P43B0030A3 21 40 460 3 P43B0030A4 15 32 230 1 P43B0050A2 30 66 SMC-CR5021 230 3 P43B0050A3 24 50 460 3 P43B0050A4 22 55 230 3 P43B0075A3 30 66 460 3 P43B0075A4 28 70

Catalog

Number

Length

Inches*

Weight

Pounds*

Pentek

Control Box

Catalog Number

Pump

3.78”

Width

M9111WS

4” SUBMERSIBLE PUMPS

Capacity liters per minute

The Ranger

PUMP PERFORMANCE  25 GPM PUMP PERFORMANCE  35 GPM

02575 12550 100 150 175

1200

7-1/2 HP

1000

800

600

5 HP

3 HP

400

Total head in feet

2 HP

1-1/2 HP

200

1 HP

02010 40 5030

Capacity gallons per minute

350

300

250

200

150

Total head in meters

100

050 100 150 200

1200

10 HP

1000

7-1/2 HP

800

600

5 HP

400

Total head in feet

200

3 HP

2 HP

1-1/2 HP

1 HP

Capacity gallons per minute

PUMP PERFORMANCE  50 GPM PUMP PERFORMANCE  80 GPM

Capacity liters per minute

050 100 200 300150 250

1000

10 HP

800

7-1/2 HP

600

5 HP

400

Total head in feet

200

3 HP

2 HP

1-1/2 HP

300

250

200

150

100

Total head in meters

0 150 300 450100 250 40050 200 350

700

600

500

400

300

Total head in feet

200

10 HP

7-1/2 HP

5 HP

3 HP

2 HP

100

350

300

250

200

150

Total head in meters

100

010 40 5030

200

150

100

Total head in meters

010 40 60 705030

Capacity gallons per minute

04020 60 80 120100

Capacity gallons per minute

M9111WS

4” SUBMERSIBLE PUMPS

The Ranger

PUMP PERFORMANCE

Catalog

Number

25 GALLONS PERMINUTE

1 SS10-25

1-1/2 SS15-25

2 SS20-25

3 SS30-25

5 SS50-25

7-1/2 SS75-25

35 GALLONS PERMINUTE

1 SS10-35

1-1/2 SS15-35

2 SS20-35

3 SS30-35

5 SS50-35

7-1/2 SS75-35

10 SS100-35

50 GALLONS PERMINUTE

1-1/2 SS15-50

2 SS20-50

3 SS30-50

5 SS50-50

7-1/2 SS75-50

10 SS100-50

80 GALLONS PERMINUTE

2 SS20-80

3 SS30-80

5 SS50-80

7-1/2 SS75-80

10 SS100-80

Tank

Pressure

20/40 30/50

20/40 30/50 36 33

20/40 30/50 36

20/40 30/50 36 34 32

20/40 30/50

20/40 30/50 37 36

20/40 30/50

20/40 30/50 50

20/40 30/50 49

20/40 30/50

20/40 30/50 64

20/40 30/50

20/40 30/50 100 94

20/40 30/50

Pumping Depth in Feet

0 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 650 700 750 800 850

35 3031 2827 2222 1718 1211

33 3030 2727 2323 2020 1515

36 3333 3131 2728 2425 2021 1617

37 2525

49 4243 3435 2628

65 5556 4546 3437

63 5556 4747 4040 2930

75 5856 4040

93 8181 7172 6060 4850

50 4646 4041 3335 2627

49 4546 4242 3738 3333 2627

6464 6060 5555 4950 4444 3536

6667 6464 6061 5757 5454 5051 4641 3630

94 8887 8080 7272 6263 5857 5049 4040

100 9696 9091 8787 8282 7877 7272 6760 5245

100

33 3030 2825 2218

21 15

49 4747 4545 4339 3632 2823

6767 6565 6360 5855 5349 4643 4035

97 9595 9393 9089 8684 8172 7068 6558

37 3634 3331 3028 2725 2422 2118 1613

34 3432 3230 2928 2726 2423 2219 1816

50 4947 4644 4340 3836 3432 3027

51 4949 4848 4746 4543 4240 3938 3735 3432 3029 2725

68 6765 6361 5958 5653 5148 4644 4239 3733

24 16

M9111WS

SUBMERSIBLE MOTORS AND MOTOR CONTROLS

PENTEK® XE Series 4” Submersible Motors

Built with the latest design, manufacturing and testing technology, the Pentek XE Series 4” submersible high-thrust motors feature laserwelded 304L stainless steel construction, higher thrust capacities and higher efficiencies. The Pentek XE Series submersible motors incorporate “encapsulated, epoxy stator design,” and professional-grade Class F insulation provides longer life in harsh environments. Each motor is 100% factory pressure and run tested to support our quality standards.

APPLICATIONS

n Water systems… for residential,

industrial, commercial, multiple housing and farm clean water use.

SPECIFICATIONS

End Bell – 304 Stainless Steel

Shell – 304 Stainless Steel

Motor Shaft – 17-4 Precipitation

Hardened Stainless Steel

Insulation – Class F, 311°F (155°C)

Max. Water Temp – 86°F (30°C)

Fasteners – 304 Stainless Steel

Sand Boot – Nitrile

Cable – Field-serviceable, Controlled

Compression Design, UL and CSA Approved

Cable Length – 48”

Diaphragm – EPDM

Thrust Bearings – Kingsbury-type, pivot

shoe, carbon graphite mating ring

Thrust Load Capacity – 700 lbs.

FEATURES

700# Rated Kingsbury Thrust Bearing Design –

bearings are standard on all HPs allowing for higher thrust loads, providing many years of trouble-free service under severe-duty operation.

2-Wire Permanent Split Capacitor –

operation and improved operating efficiency.

3-Wire Motors –

SMC and other single-phase motor controls.

All Stainless Steel Exterior

Professional-Grade Class F-Compliant Motor Insulation –

service life.

UL, CSA Approved and 100% Factory Pressure and Run Tested

Equipped withSurge Arrestor

Automatic Thermal Protection on 1/2 – 1 HP Models

Large high-performance

Design insures quiet

Operate with Pentek

Allows for longer

LIGHTNING PROTECTION

M9112WS

SUBMERSIBLE MOTORS AND MOTOR CONTROLS

PENTEK® XE Series 4” Submersible Motors

ORDERING INFORMATION

Rating

HP kW Volts Hz

PSC 2 Wire

1/2 0.37

3/4 0.55 230 1.5 P42B0007A2 5.0 6.4 24.8 3.0-4.8 12.4 314 22.7 10.3

1 0.75 230 1.4 P42B0010A2 7.9 9.1 21.7 4.2-5.2 13.3 337 24.5 11.1

1-1/2 1.1 230 1.3 P42B0015A2 9.2 11.0 42.0 1.9-2.3 14.9 378 28.9 13.1

CSIR 3 Wire

1/2 0.37

3/4 0.55 230 1.5 P43B0007A2 7.2 8.3 32.0 2.6-3.6 11.8-13.0 10.8 275 21.4 9.7

1 0.75 230 1.4 P43B0010A2 8.4 9.7 41.2 2.2-3.2 11.3-12.3 11.7 297 23.1 10.5

CSCR 3 Wire

1/2 0.37 3/4 0.55 1.5 P43B0007A2 5.1 6.3 32.0 2.6-3.6 11.8-13.0 10.8 275 21.4 9.7

1 0.75 1.4 P43B0010A2 6.1 7.2 41.2 2.2-3.2 11.3-12.3 11.7 297 23.1 10.5

1-1/2 1.1 1.3 P43B0015A2 9.7 11.1 47.8 1.6-2.3 7.9-8.7 13.6 345 27.4 12.4

2 1.5 1.25 P43B0020A2 9.9 12.2 49.4 1.6-2.2 10.8-12.0 3 2.2 1.15 P43B0030A2 14.3 16.5 76.4 1.1-1.4 2.0-2.5 18.3 466 40.0 18.1 5 3.7 1.15 P43B0050A2 24 27 101.0 0.62-0.76 1.36-1.66 1500 27.7 703 70.0 31.8

3 Phase

HP kW Volts Hz

1/2 0.37

3/4 0.55

1 0.75

1-1/2 1.1

2 1.5

3 2.2

5 3.7

7-1/2 5.6

10 7.5 460 60 1.15 P43B0100A4 15.6 17.2 1.8-2.2 110.0 30.7 780 78 35.4

115 230 1.6 P42B0005A2 3.7 4.7 19.5 4.5-5.2 11.0 279 19.2 8.7

115 230 1.6 P43B0005A2 5.5 6.3 22.3 4.2-4.9 17.4-18.7 9.7 246 18.1 8.2

230 60

Rating

200 230 P43B0005A3 2.4 2.9 5.72-7.2 17.3 10.0 254 18.9 8.6 460 P43B0005A4 1.3 1.5 23.6-26.1 9 10.0 254 18.9 8.6 200 230 P43B0007A3 3.3 3.9 3.3-4.3 27 10.8 274 21.4 9.7 460 P43B0007A4 1.7 2.0 14.4-16.2 14 10.8 274 21.4 9.7 200 230 P43B0010A3 4.0 4.7 4.1-5.1 26.1 11.7 297 23.1 10.5 460 P43B0010A4 2.2 2.5 17.8-18.8 13.0 11.7 297 23.1 10.5 200 230 P43B0015A3 5.2 6.1 2.8-3.4 32.4 11.7 297 23.1 10.5 460 P43B0015A4 2.8 3.2 12.3-13.1 16.3 11.7 297 23.1 10.5 575 P43B0015A5 2 2.4 19.8-20.6 11.5 11.7 297 23.1 10.5 200 230 P43B0020A3 6.5 7.6 1.8-2.4 44.0 13.8 351 27.4 12.4 460 P43B0020A4 3.3 3.8 8.00-8.67 23.0 13.8 351 27.4 12.4 575 P43B0020A5 2.7 3.3 9.4-9.7 21.4 15.3 389 32 14.5 200 230 P43B0030A3 9.2 10.1 1.3-1.7 58.9 15.3 389 32 14.5 460 P43B0030A4 4.8 5.3 5.9-6.5 30.0 15.3 389 32 14.5 575 P43B0030A5 3.7 4.1 9.4-9.7 21.4 15.3 389 32 14.5 200 230 P43B0050A3 15.7 17.5 0.85-1.25 93.0 21.7 551 55 24.9 460 P43B0050A4 7.6 8.5 3.58-4.00 48.0 21.7 551 55 24.9 575 P43B0050A5 7.0 7.6 3.6-4.2 55.0 27.7 703 70 31.8 200 230 P43B0075A3 24.0 26.4 0.55-0.85 140.0 27.7 703 70 31.8 460 P43B0075A4 12.2 13.5 1.9-2.3 87.0 27.7 703 70 31.8 575 P43B0075A5 9.1 10.0 3.6-4.2 55.0 27.7 703 70 31.8

Service

Factor

1.6 P42B0005A1 7.4 9.5 36.4 1.3-1.8

1.6 P43B0005A1 11.0 12.6 49.6 0.9-1.6 5.7-7.0

1.6 P43B0005A2 4.1 4.9 22.3 4.2-4.9 17.4-18.7

Service

Factor In. mm Lb. Kg

60 1.6

60 1.5

60 1.4

60 1.3

60 1.25

60 1.15

Catalog

Number

Catalog

Number

P43B0005A8 2.9 3.4 4.1-5.2 22

P43B0007A8 3.8 4.5 2.6-3.0 32.0 10.8 274 21.4 9.7

P43B0010A8 4.6 5.5 3.4-3.9 29.0 11.7 297 23.1 10.5

P43B0015A8 6.3 7.2 1.9-2.5 40.0 11.7 297 23.1 10.5

P43B0020A8 7.5 8.8 1.4-2.0 51.0

P43B0030A8 10.9 12.0 0.9-1.3 71.0 15.3 389 32 14.5

P43B0050A8 18.3 20.2 0.4-0.8 113.0

P43B0075A8 27.0 30.0 0.5-0.6 165.0 27.7 703 70 31.8

Full

Load

Amps

Full

Load

Amps

Max. Load

(SF Load)

Amps

Max. Load

(SF Load)

Amps

Locked

Rotor

Amps

Line to Line

Resistance Ohms

Winding

Main

Resistance

Length Weight

Start

Resistance In. mm Lb. Kg

Locked Rotor

Amps Thrust Rating

Thrust

Rating

700

900

700

900

1500

11.0 279 19.2 8.7

10.0 253 18.9 8.6

9.7 246 18.1 8.2

15.1 383 31.0 14.1

Length Weight

10.0 254 18.9 8.6

13.8 351 27.4 12.4

21.7 551 55 24.9

NOTE: Amp ratings on 3-wire motors reflect use with CSIR controls. A CSCR control is recommended for lower values.

M9112WS

SUBMERSIBLE MOTORS AND MOTOR CONTROLS

PENTEK® XE Series 4” Submersible Motors

OUTLINE DIMENSIONS

LEADLENGTH

Catalog Number # of Wire Type Length Gauge

XESERIESREPLACEMENTMOTORLEADS

P18-1485K 2 Wire XLPE 48" 14 Ga

P18-1486K 3 Wire XLPE 48" 14 Ga

P18-1651K 2 Wire XLPE 100" 14 Ga

P18-1652K 3 Wire XLPE 100" 14 Ga

Dimensions (in inches) are for estimating purposes only.

M9112WS

SUBMERSIBLE MOTORS AND MOTOR CONTROLS

Cable Selection

Two different cable sizes can be used.

The example below is for reference. Depending on the installation, any number of combinations may be used, as long as the total percentage length of the two cables used does not exceed 100%. This is to ensure that adequate voltage will be supplied to the motor.

In a replacement installation, the well already has 210 feet of buried #12 cable between the service entrance and the well head. The question is: What size cable is required in the well with a 1 HP, 230 Volt, 1 PH, 3W motor setting at 310 feet?

1. According to the table, #12 cable is large enough for the 1 HP motor so the percent of the maximum allowable cable used by the 210-foot run is 210 ÷ 359 = 58.5%, since 359 feet is the total allowable.

Example:

1 HP, 230 Volt, 3W, 1 PH Motor

2. With 58.5% of the total allowable cable already used between the service entrance and the well head, only 41.5% is left for the well. Therefore, the 310 feet needed in the well can only utilize 41.5% of the total feet allowed in the table.

3. From the table, 41.5% of the 573 feet for #10 cable equals only 238 feet, so a larger size is needed. For #8, 41.5% of 908 feet = 377 feet. As a result, #8 can be used for the 310 feet in the well.

CAUTION

Use of wire size smaller than listed will void warranty.

MOTOR LEAD LENGTHS  PENTEK® 2WIRE MOTORS

60 Hz Motor Rating 60C and 75C Insulation – AWG Copper Wire Size

Volts HP 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0

115 1/2 115 183 293 463 721 1150 1445 1825 2299 2902 3662 4623 5824

1/2 466 742 1183 1874 2915 4648 5843 7379 9295 11733

230

3/4 342 545 869 1376 2141 3413 4291 5419 6826 8617 10871

1 241 383 611 968 1506 2400 3018 3811 4801 6060 7646 9652

1-1/2 199 317 505 801 1246 1986 2496 3153 3972 5013 6325 7985

MOTOR LEAD LENGTHS  PENTEK 3WIRE PSC MOTORS

CSIR Control Boxes

60 Hz Motor Rating 60C and 75C Insulation – AWG Copper Wire Size

Volts HP 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0

115 1/2 87 138 221 349 544 867 1090 1376 1734 2188 2761 3485 4391

1/2 348 553 883 1398 2175 3467 4359 5505 6935 8753

230

CSCR Control Boxes

60 Hz Motor Rating 60C and 75C Insulation – AWG Copper Wire Size

Volts HP 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0

230

All lengths in feet. NOTE: Based on service factor amps, 30C ambient and 5% voltage drop. (1) This table is based on copper wire. If aluminum wire is used it must be two sizes larger.

(2) Cables #14 to #0000 are AWG sizes.

3/4 264 420 670 1061 1651 2632 3309 4178 5264 6644 8383

1 226 359 573 908 1413 2252 2831 3575 4504 5685 7173

1/2 447 711 1135 1797 2796 4458 5604 7078 8916 11254

3/4 348 553 883 1398 2175 3467 4359 5505 6935 8753 11044

1 304 484 772 1223 1903 3034 3814 4817 6068 7659 9663

1-1/2 197 314 501 793 1234 1968 2474 3124 3936 4968 6268

2 180 286 456 722 1123 1790 2251 2843 3581 4520 5703

3 133 211 337 534 830 1324 1664 2102 2648 3342 4217 5323

5 206 326 507 809 1017 1284 1618 2042 2577 3253

Example: When the table calls for #12 copper wire you would use #10 aluminum wire.

M10269WS

+ 86 hidden pages