How it Works
Pentair
Loading...
EVERPURE H-54

Pentair EVERPURE H Series, EVERPURE H-54, EVERPURE H-300, EVERPURE H-104, EVERPURE H-300-HSD Installation Instructions Manual

...
EVERPURE® H SERIES WATER FILTRATION SYSTEMS
SISTEMA DE FILTRACIÓN DE AGUA DE LA SERIE H
H SÉRIE SYSTÈME DE FILTRAGE D’EAU
INSTALLATION INSTRUCTIONS  ENGLISH
INSTRUCCIONES DE INSTALACIÓN  ESPAÑOL
Instrucciones básicas de instalación..................Página 9
INSTRUCTIONS D’INSTALLATION  FRANÇAIS
2
Thank you for purchasing an Everpure commercial-grade water filtration system for your home. With your Everpure system, you get premium quality water direct from your tap that’s great-tasting, healthful and convenient for you and your family.
Product Specifications:
•For Cold Water Use Only
•Temperature Range: 35-100°F (2-38°C)
•Min.-Max. Working Pressure: 10-125 psi (0.7-8.6 bar)
•Service Flow Rate: 0.5 gpm (1.9 Lpm)
THE OWNER’S GUIDE IS APPLICABLE FOR THE FOLLOWING
Model H-54 Rated Capacity: 750 gal (2835 L)* Model H-300 Rated Capacity: 300 gal (1140 L)* Model H-104 Rated Capacity: 1,000 gal (3780 L)* Model H-300-HSD Rated Capacity: 300 gal (1140 L)* Model H-300-NXT Rated Capacity: 300 gal (1140 L)* Model H-1200 Rated Capacity: 1,000 gal (3780 L)*
For optimum performance, cartridge replacement
*
is required once a year, or sooner if flow becomes too slow for convenience, or if the unit’s rated capacity is reached.
For purchase of replaceable components please contact your local distributor. H-1200 customers: Instructions for installing the H-1200
begin on page 6 of this Installation and Operation Guide.
EVERPURE FILTER MODELS:
The Universal Plumbing Code adopted by over 20 states, and other specific state and county codes, prohibit the use of saddle valves and their use is never recommended. You must adhere to your state/local plumbing codes. Consult your licensed plumber if you have related questions.
Do NOT use copper tubing with the John Guest® Fittings provided with your Everpure Filter System. Copper tubing may appear to fit, but water leaks will develop over time and use. If copper tubing is required, you must use copper compression fittings available from any hardware/plumbing supply.
CALIFORNIA PROPOSITION 65 WARNING
State of California to cause cancer or birth defects or other reproductive harm.
Multiple Appliance Connections: You can also connect your
Everpure Filter to the refrigerator for ice and water, an instant hot water dispenser or chiller, or a plumbed-in coffee brewer. Simply install connection “tees” (available from any hardware/ plumbing supply) in the water line between the filter and the faucet adaptor, and run new tubing to each appliance.
NOTE:
These appliances require flow and volume beyond the design limits of your under-sink filter system.
NOTE:
faucet connection under the sink, a flush valve is required.
This product contains chemicals known to the
DO NOT connect this system to a commercial ice maker.
If connecting to a home icemaker and there is no filter
ENGLISH
EVERPURE
®
H-Series Water Filtration Systems • 3
BASIC INSTALLATION INSTRUCTIONS
Tools Needed For Installation
• Phillips Screwdriver • Wrench • Pencil
• Utility Knife • Measuring Tape
1. OPEN CARTON & INSPECT PARTS
Installation Parts
Key Description Part No.
1 QL3 Filter Head EV925831
ENGLISH
2 Filter Cartridge (varies) 3 2 Locking Washers EV306204 4 2 Screws EV306196 5 Angle Stop Valve Adaptor EV312120 6 Tubing, 1/4" poly A0860119
Elbow Fitting Pack Restrictor
7 8 Plumbers Tape EV312119 9 Faucet Connector EV312135
10 Everpure Filter Timer EV314160
EV308168
1
3
4
1
5
7
2
6
10
8
2. VERIFY UNDERSINK MOUNTING LOCATION
Measure 22” from the base of the cabinet, and mark the mounting location for the top of the filter head. Make sure there is adequate space above the head to open and close the built in shut-off valve and to avoid crimping the water line tubing. Also, make sure your chosen location offers easy access for future cartridge changes.
DIMENSION Width Height Depth H-54 5" 15" 5" H-104 5" 20" 5" H-300 5" 22" 5" H-300-HSD 5" 22" 5" H-300-NXT 5" 22" 5"
The head and cartridge must be mounted in the
NOTE:
vertical position, with the cartridge hanging down.
9
2
22"
4 • EVERPURE
®
H-Series Water Filtration Systems
3. MOUNT FILTER HEAD UNDER SINK
A. Identify Filter Head and the two Elbow Fittings, and
note that the Outlet Fitting has a black band. This fitting includes a small restrictor insert to ensure maximum flow at 1/2 gallon per minute.
B. Apply Plumbers Tape to the threads of each Elbow
Fitting. Wrap tape in direction of the threads to assure a tight fit and avoid small leaks.
C. Screw Inlet Elbow Fitting into the left side of the
filter head, and hand tighten only.
D. Screw Outlet Elbow Fitting (black band) into the
right side of the filter head in the same manner.
E. Securely mount the filter head on the cabinet wall
using the enclosed mounting screws and washers.
4. ATTACH INLET WATER SUPPLY
F. Locate and close the cold water Angle Stop Valve
under your kitchen sink. Open cold water line of faucet to release water pressure.
G. Unscrew and disconnect the braided tubing on top of
the Angle Stop Valve.
H. Attach the bottom of Angle Stop Adaptor to the
existing cold water Angle Stop Valve.
I. Attach the braided tubing to the top of the Angle
Stop Adaptor.
J. Close side valve on Angle Stop Adaptor and open
cold water Angle Stop Valve to return water service to kitchen sink. Check for leaks.
Plumbers Tape should not be required for
NOTE:
these next steps.
K. Measure length of tubing needed to connect Angle
Stop Adaptor to Inlet Elbow Fitting on Filter Head.
Allow adequate tubing to avoid sharp turns. L. Cut tubing at a 90° angle using a sharp knife. M. Insert ends of tubing into quick-connect fittings.
Push tube into fitting and gently pull to confirm a
tight fit.
5. ATTACH FILTERED WATER TO SINK FAUCET
N. Install separate faucet for filtered drinking water.
Follow individual manufacturer’s instructions. O. Attach Faucet Connector Fitting to bottom end of
threads on new faucet assembly. Plumbers Tape
should not be required for this step. P. Measure length of tubing needed to connect the
Outlet Elbow Fitting on Filter Head to the new
Faucet Connector Fitting. Allow adequate tubing to
avoid sharp turns. Cut and insert each end of the
tubing into the fittings.
3
B
C
D
ENGLISH
E
4
F
I
G
H
L
M
5
N
P
O
EVERPURE
®
H-Series Water Filtration Systems • 5
6. INSTALL AND FLUSH FILTER CARTRIDGE
Q. Lift handle of the built-in shut off (QC Valve) on the
Head. R. Hold Head firmly with one hand. S. Align cartridge lug with label on filter Head. T. Insert filter Cartridge – Push upwards. U. Turn it to the right – About 1⁄4 turn – Until rotation
stops. V. Open Side Valve of Angle Stop Adaptor and check
for leaks up to Inlet Elbow Fitting. W. Open Filtered Water Faucet.
ENGLISH
X. Lower the QC Valve Handle to flush water to the
sink.
Flush new filter cartridges for at least
NOTE:
3 minutes (flush H-1200 system for at least 7
minutes) to remove air and any loose carbon. At
first the water may appear cloudy due to trapped
air in the filter and tubing. If water continues to
be cloudy for more than one week, please contact
Everpure Technical Services for assistance.
Y. Activate Filter Timer by pinching bubble until you
feel a change in resistance as the Filter timer
“pops”. Within a few seconds, a thin RED line will
appear in the white window showing the Timestrip®
has been activated. Peel away backing and adhere
to desired location. When the white window is
completely filled with RED, it is time to replace your
product.
6
Q
R
V W
Y
S
Label
Lug
U
T
X
H1200 INSTRUCTIONS
Tools Needed For Installation
• Phillips Screwdriver
• Wrench
• Utility Knife
• Measuring Tape
• Pencil
1. OPEN CARTON & INSPECT PARTS
Installation Parts
Key Description Part No.
1 QL Twin Series Filter Head EV927222 2 Filter Cartridges (Set of 2) EV928201 3 2 Locking Washers EV306204 4 2 Screws EV306196 5 Angle Stop Valve Adaptor EV312120 6 Tubing, 1/4" poly A0860119 7 Elbow Fitting Pack
Restrictor 8 Plumbers Tape EV312119 9 Faucet Connector EV312135
10 Everpure Filter Timer EV314160 11 Shut Off Valve,
3/8" John Guest® x 3/8" FPT
12 Coupler, 3/8" FPT
Stainless
EV308168
EV309860
EV312350
1
3
4
5
1
8
11
12
2
7
6
10
9
6 • EVERPURE
®
H-Series Water Filtration Systems
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use