WWW.PENNBARRY.COM
©PENNBARRY 2008
4
PENNBARRY
TM
Supply & Exhaust Fans
D
o
m
e
x
A
x
i
a
l
Engineering Specifications
Domex Axial Supply & Exhaust Fans
DAS & DAE
›
Model
DAS = Axial Supply Fan
DAE = Axial Exhaust Fan
›
Unit Size
10
12
14
18
›
Damper
0 = None
BDD = Back Draft Damper
MD1 = Motor Operated Damper 115V
MD2 = Motor Operated Damper 230V
MD4 = Motor Operated Damper 460V
X = Special
›
Roof Curb
0 = None K = UCA18 V = UG18
A = UCG8 L = UG12 W = URA12
B = UCG12 M = SA16 Y = URA18
C = UCG18 N = SFG12 1 = URG12
D = UCA8 P = SFG18 2 = URG18
E = UCA12 Q = SG16 X = Special
F = SFA12 R = SRA16
G = SFA18 S = SRG16
H = SCG16 T = UA12
J = SCA16 U = UA18
›
Slope
0 = None
S = Single
D = Double
›
Supply Unit
Direct drive axial roof supply fans, shall be Axial Domex DAS, supplied by PennBarry, Richardson, TX 75081.
Ventilator housings shall be heavy gauge spun aluminum construction with galvanized steel support members and shall be weatherproof, incorporating an integral
weather bafe at the top of the air shaft. Bird Screen is included. An electrical conduit
shall be furnished as an integral part of the housing to provide a clear channel for
eld wiring.
Propellers shall be statically and dynamically balanced. Motors shall be Totally Enclosed (TE), continuous duty, and positively cooled.
Each fan shall be UL compliant.
›
Exhaust Unit
Direct drive axial roof exhaust fans, shall be Axial Domex DAE, supplied by PennBarry, Richardson, TX 75081.
Ventilator housings shall be heavy gauge spun aluminum construction with galvanized steel support members and shall be weatherproof, incorporating an integral
weather bafe at the top of the air shaft. Bird Screen is included. An electrical conduit
shall be furnished as an integral part of the housing to provide a clear channel for
eld wiring.
Propellers shall be statically and dynamically balanced. Motors shall be Totally Enclosed (TE), continuous duty, and positively cooled.
Each fan shall be UL compliant.
DAS
DAE
›
Metal Liner
0 = None
L = Metal Liner
›
Damper Holding Plate
0 = None
P = Damper Holding Plate
›
Neoprene Gasket
0 = None
G = Gasket
›
No Wooden Nailer
0 = Wood Nailer
N = No Wooden Nailer
›
Curb Paint/Coating
0 = None
B = Air Dried Epoxy
Q = Air Dried Enamel
X = Special
Loading...