Pelikan DNDC540DV, DNDC540 User Manual

Model# DNDC540 & DNDC540DV

Digital Day&Night

Dome Camera

Instruction Guide

www.PelikanCam.com

󱇲

Features

Warning

󱇲

Horizontal Resolution of 540 TV
Lines

Clear image quality has been achieved by
employing a SONY CCD with 410,000
(effective) pixels, which provides a
horizontal resolution of 540 TV lines.

DAY & NIGHT

This camera has a function that auto­matically selects the mode that is
appropriate for daytime or night-time
conditions. The COLOR mode operates in
daytime conditions to provide optimum
colors, and BW mode operates in night­time conditions to enhance the definition
of the image.

Electronic IRIS

The electronic IRIS function enables
continuous automatic control of the
shutter between 1/60~1/120,000 seconds.

PRIVACY Function

The PRIVACY function conceals the
areas not required to appear on
the image.

High Sensitivity

The built-in high sensitivity SONY COLOR
CCD enables a clear image even in

0.3Lux(0.1Lux B/W) or as low as 0.002Lux
with SENS-UP.

DNR (Digital Noise Reduction)

The amount of low illuminance noise
has been significantly reduced, and the
signal-to-noise ratio (S/N ratio) as well as
horizontal resolution have been improved,
resulting in clear and sharp images
displayed even in low light.

Controlled by OSD Menu

The camera functions are controlled by
selecting text displayed on the monitor
screen.

Additional Functions

SENS-UP, MOTION DETECTION,
MIRROR, SHARPNESS and SYNC
(INT/LL) functions are also available.

The camera requires periodic inspection.

Contact an authorised technician to carry out the inspection.

Stop using your camera when you find it malfunctioning.

If the camera emits smoke or is unusually hot for a long period,
a fire may be caused.

Do not Install the camera on a surface that can not support it.

If the camera is installed on an inappropriate surface, it may fall
and cause injury.

Do not hold plug with wet hands.

It could cause an electric shock.

Do not dis-assemble the camera.

It may result in an electric shock or other hazards.

Do not use the camera close to a gas or oil leak.

It may result in a fire or other hazards.

3

Axis built-in 120mm Dome Housing

Digital Day&Night Dome Camera

2

3

Digital Day&Night Dome Camera

󱇲

Contents

Features

Warnings and Precautions

Components

Names and Functions of Parts

󱇲 Lens

󱇲 OSD

󱇲 VBS-EXTRA

󱇲 3 Axis Bracket

󱇲 SMPS

Dimensions

Installation

Cable Connections

2

3

8

9

10

10

11

11

11

11

12

13

Camera Operation

󱇲 Menu

󱇲 Settings

• LENS (selection)

• SHUTTER (condition and speed control)

• WHITE BALANCE control

• BLC (Back Light Compensation)

• AGC (Auto Gain Control)

• DNR (Digital Noise Reduction)

• SENS-UP

• SPECIAL

• EXIT

Troubleshooting

Specification

14

14

15

16

18

19

20

21

22

23

24

29

30

32

Digital Day&Night Dome Camera

4

5

Digital Day&Night Dome Camera

󱇲 Precautions

• If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.

• Please check that the power satisfies the normal specification before
connecting the camera.

Do not install the camera in
extreme temperature conditions.

Only use the camera under conditions
where temperatures are between

-10°C and +50°C. Be especially
careful to provide ventilation when
operating under high temperatures.

Do not install the camera under
unstable lighting conditions.

Severe lighting change or flicker can
cause the camera to work improperly.

Do not install or use the camera in an
environment where the humidity is high.

It can cause the image quality to be
poor.

Do not touch the front lens of the
camera.

This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.

Do not drop the camera or protect
it from physical shocks.

It can cause malfunctions to occur.

Do not expose the camera to rain
or spill beverage on it.

If it gets wet, wipe it dry immediately.
Liquids can contain minerals that
corrode the electronic components.

Never keep the camera pointed
directly at strong light.

It can damage the CCD.

Do not expose the camera to
radioactivity.

If exposed to radioactivity the CCD
will fail.

Digital Day&Night Dome Camera

6

7

Digital Day&Night Dome Camera

󱇲 Components

1. COLOR DOME CAMERA

2. SCREWS

3. WIRE FOR VBS-EXTRA

Names and Functions of Parts

󱇲

4. INSTRUCTION GUIDE

Digital Day&Night Dome Camera

8

9

Digital Day&Night Dome Camera

■ Names and Functions of Parts

Names and Functions of Parts

■

①

LENS : Vari-Focal DC Auto Iris Lens

(2.5mm~6.0mm / F1.2, 3.8mm~9.5mm / F1.2

2.9mm~10.0mm / F1.2, 4.0mm~9.0mm / F1.5)

(unit : mm)

②

OSD PCB

●

●

SET button : Used for the menu display. This button can be used to
confirm settings after changing the value of the selected function or
current conditions.

●

●

UP & DOWN buttons : Used for selecting items by moving the cursor
up or down on the menu screen.

③

VBS-EXTRA FOR CONNECTING TO LCD

Please use the supplied wire when connecting to LCD

VBS-EXTRA

④

3 AXIS BRACKET

Please loosen screws and fix tilted and panned position.

⑤

SMPS PCB FOR DUAL POWER

Dimensions

■

(unit : mm)

●

●

LEFT & RIGHT buttons : Used when changing item values, by moving
the cursor to the left or right on the menu screen.

Digital Day&Night Dome Camera

10

11

Digital Day&Night Dome Camera