Pelican NS3 User Manual

4 (1)
Pelican NS3 User Manual

 

Water

Systems

Pelican

 

Owner’s Manual

 

Pelican NaturSoft NS3/NS6

Salt Free Water Softener/Conditioner

 

NS3-6 Rev H —

 

 

 

Systems

 

 

 

 

 

 

Pelican NaturSoft NS3/NS6 Salt Free Water Softener/Conditioner

Page 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pelican

Water

 

 

 

 

© Copyright 2011 E

viro Water Solutions Inc. All rights reserved.

 

 

All inform

tion cont

ined herein is the property of Pelican Water Systems. Pelican Water Systems makes

 

no warranty of

ny kind with regard to this material, including, but not limited to, the implied warranties of

 

mer hant

bility

nd fitness for a particular purpose. Pelican Water Systems shall not be liable for technical

 

or ed tor al errors or omissions contained herein or for incidental or consequential damages in connection

 

w th the furn sh ng, performance, or use of this material. The information is provided “as is” without

 

warranty of any k nd and is subject to change without notice. This document contains proprietary

 

nformat on wh ch s protected by copyright. No part of this document may be photocopied, reproduced, or

 

trans ated into another language without the prior written consent of Pelican Water Systems. Pelican Water

 

Syst ms is

Enviro Water Solutions, Inc. company.

 

 

 

 

 

© 2011 Enviro Water Solutions, Inc.

www.pelicanwater.com

 

3060 erformance Circle, Suite 2, DeLand, FL 32724

(877) 842-1635

 

 

Systems

NS3-6 Rev H —

 

 

 

Pelican NaturSoft NS3/NS6 Salt Free Water Softener/Conditioner

 

Page 3

Table of Contents

 

 

Table of Contents . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . . . . . . 3

Product Operation and Specifications . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 4

Important Information . . .

. . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 4

Water Conditions for Operation . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 4

Complete Parts List . . . . . .

. . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 5

Installation Overview . . . .

. . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 6

Pre-Installation . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 6

Bypass Valve Installation . .

. . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 6

Installation . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 7

Pre-Filter Assembly . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 7

Pre-Filter Installation . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 7

Whole House Salt Free Water Softener/Conditioner Tank Installation . . .

. . . . . . . . . . . . . . 7

Media Soak . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 9

 

Water

 

 

Media Flush/Condition . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . . 9

Complete the Installation . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 10

Clean your Hot Water Heater (optional) . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 10

What to Expect with your New NaturSoft

 

 

Salt Free Water Softener/Conditioner . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 11

Adding the Pelican Logo Sticker: . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 12

Care and Cleaning . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 13

Sediment Filter . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 13

Replacing the Sediment Filter . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 13

Troubleshooting . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 14

Warranty . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 15

Warranty Registration Form .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 16

Product Certifications . . . . .

. . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . . . . . . . 17

Pelican

 

 

 

© 2011 Enviro Water Solutions, Inc.

 

www.pelicanwater.com

3060 erformance Circle, Suite 2, DeLand, FL 32724

 

(877) 842-1635

NS3-6 Rev H —

 

 

 

 

 

 

 

Pelican NaturSoft NS3/NS6 Salt Free Water Softener/Conditioner

 

 

Page 4

 

 

 

 

 

 

 

 

Product Operation and Specifications

 

 

 

 

 

 

 

 

 

Specification Description

 

NS3

 

 

 

NS6

 

 

 

 

 

 

 

 

Max Flow Rate

 

10 GPM

 

 

15 GPM

 

 

 

 

 

 

 

 

 

Minimum Working Pressure

 

25 PSI

 

 

 

 

 

 

 

 

 

 

 

 

 

Maximum Working Pressure

 

80 PSI

 

 

 

 

 

 

 

 

 

 

 

Maximum Vacuum

 

5 inch/127 mm Hg

 

 

 

 

 

 

 

 

 

 

Operating Temperatures

 

36°F – 120°F

 

 

 

 

 

 

 

 

 

 

 

 

pH Range

 

7 - 11

 

 

 

 

 

 

 

 

 

 

 

 

Important Information

 

 

 

 

 

Read these instructions carefully and determine the location of all system components before

 

beginning installation.

 

 

 

 

 

 

 

Check all applicable plumbing, building, and electrical codes for installation compliance.

 

Install the system on the main water supply.

 

 

 

 

Systems that contain electronic components cannot be installed outside in uncovered areas.

 

Water Conditions for Operation

 

 

Systems

 

 

 

 

 

The water should be free of hydrogen sulfid

, a dissolv d gas with a characteristic smell of rotten

eggs. If present, it can coat the cataly ic surface of

he m dia and interfere with the process. The gas

should be removed through adequate pre- r a m nt.

 

 

 

The water should be free of hydrocarbons, oils, and lubricants. If present, they can coat the catalytic

surface of the media and interfere with the process. Remove through adequate pre-treatment.

 

The water should contain less th n 1 mg/l of phosphates. Phosphates sequester dissolved hardness

molecules preventing them from forming cryst ls

nd may coat the catalytic media surface and

interfere with the process.

 

 

 

 

 

 

 

The copper level in the water supply should be below the MCL of 1.3mg/L. If copper is present above

this level, it can attach to the surface of the catalytic media and interfere with the process.

 

WARNING:

 

 

 

 

 

 

 

If this or any other system is installed in

metal (conductive) plumbing system, i.e. copper or

galvanized metal, the plastic components of the system will interrupt the continuity of the

plumbing system. As a result a

y errant electricity from improperly grounded appliances

downstream or pote tial galvaWateric activity in the plumbing system can no longer ground

through contiguous metal plumbing. Older homes may have been built in accordance with

building codes from decades ago, some of which actually encouraged the grounding of

 

electric l ppli nces through the plumbing system. Consequently, the installation of a bypass

consisting of the s me m terial as the existing plumbing, or a grounded "jumper wire"

 

bridging the equipment nd re-establishing the contiguous conductive nature of the

 

plumbing system must be installed prior to your systems use.

 

CAUTION:

When add ng f ltration/softening system to homes/buildings supplied by well water, the system should be insta ed fo ow ng the pressure tank. DO NOT USE this system for pneumatic or hydro pneumatic app ications. If you are using a booster pump, then install this system following the booster pump. If you have questions, please call customer service.

© 2011 Enviro Water Solutions, Inc.

www.pelicanwater.com

3060 erformance Circle, Suite 2, DeLand, FL 32724

(877) 842-1635

Pelican

 

NS3-6 Rev H —

 

 

 

Systems

 

 

 

 

 

Pelican NaturSoft NS3/NS6 Salt Free Water Softener/Conditioner

 

Page 5

Complete Parts List

 

 

 

Note: Pelican supplies the parts below to accommodate a variety of water supply lines.

 

Table 1: Parts List

 

 

 

 

 

Part

Description

 

Qty.

Part

Description

Qty.

 

1" Plastic Male NPT

1

 

Bypass Valv :

1

 

Assembly:

 

 

 

In/Out Bypass Valve wi h Red

 

 

V3007-04 WS1 Fitting 1"

 

 

 

 

 

 

Arrow Handles

 

 

Plastic Male NPT Assembly

 

 

 

 

(2): O-Rings (2), Split Rings

 

 

 

 

(2), and Connectors (2)

 

 

 

 

 

Pre-Filter System:

 

1

 

Sediment Filter

1

 

PP5 Big Blue Pre-Filter

 

 

PC40-1 5 Micron Poly-Spun

 

 

Housing, Mounting Bracket,

 

ediment Filter

 

 

Phillips Head Screws (4),

Bolt

 

 

 

 

Head Screws (4), and Washers

 

 

 

 

(4)

Water

 

 

 

Pre-Filter Wrench

Pelican Whole House Salt

 

 

 

1

 

1

 

 

 

 

 

Free Water Softener

 

Note: Drawings are not to scale.

 

 

 

 

 

Additional fittings will be needed to d

pt to your plumbing.

 

 

Pelican

 

 

 

www.pelicanwater.com

© 2011 Enviro Water Solutions, Inc.

 

 

3060 erformance Circle, Suite 2, DeLand, FL 32724

 

(877) 842-1635

NS3-6 Rev H —

 

 

 

 

Systems

 

 

 

 

 

Pelican NaturSoft NS3/NS6 Salt Free Water Softener/Conditioner

Page 6

Installation Overview

 

 

 

Wall

 

 

Wall

 

 

 

Pre-Filter

 

 

 

 

IN

OUT

 

 

Incoming

 

 

 

 

Ou going

 

 

 

 

Wa er o

Water

 

 

 

 

 

 

 

 

Hou e

Supply

 

 

 

 

 

 

 

 

 

 

 

Water

 

19"

 

 

oftener/Conditioner

 

 

 

Salt F ee Water

Figure 1

 

 

 

 

 

Pre-Installation

 

 

 

 

Bypass Valve Installation

 

 

 

 

 

 

Red Arrow

 

 

 

 

 

Quick Connect Nut

 

 

Pelican

 

 

ater Filter Head

UPFLOW INLET

DOWNFLOW INLET

 

 

Salt Free Water

 

 

 

 

 

 

 

 

 

 

Softener/Conditioner

 

 

Figure 2

The Byp ss V lve comes pressembled and ready to install with the O-Rings, Split Rings, and Quick Connect Nuts. Push the Byp ss Valve into the head of the Pelican Whole House Salt Free Water Softener with the unthre ded ends oriented toward the tanks and hand-tighten the Quick Connect Nuts.

Not e:

The bypass va ve(s) in luded with this system are designed for multiple Pelican water systems. This may resu t the arrows on the bypass valve(s) pointing differently than shown. If the arrows on your bypass va ve(s) do not match the diagram, remove the red arrows by pulling them straight up, turn them 180° to match the drawing, and push them back down onto the stem.

© 2011 Enviro Water Solutions, Inc.

www.pelicanwater.com

3060 erformance Circle, Suite 2, DeLand, FL 32724

(877) 842-1635

Loading...
+ 11 hidden pages