Pelican flow 106, vibe 80 Owner's Manual
Eric Marchand - ericmarchandphotos.com
SUP OWNER’S MANUAL
IP1380-4
3
4
4
4
4
5
5
5
6
7
8
8
10
10
11
12
Your S UP
Getting Star ted
Materials / Manufacturing
Transportation
Pre-Launch Checklist
Launching Procedure
Mooring/Docking
Basic SUP Principles
Safety Precautions
Care and Maintenance
Storage
Extended Limited Warranty
Manufacturer’s Declaration of Origin
SUP Description
Warranty Registration Card
Outfitting and Features
INDEX
1000 Place Paul-Kane, Laval
Quebec, Canada H7C 2T2
1.800.463.6960
PELICANSPORT.COM
IMPORTANT INFORMATION
Model
Date of Purchase
Dealer Name
Registration No.
Province/State
Model No.
Serial No. (ZEP)
HOW TO LOCATE THE SERIAL NUMBER
The serial number is located on the outside of the hull in the back right-hand
corner. The number starts with ZEP and is twelve (12) digits long.
Example: ZEP12345A678
WELCOME!
Thank you for choosing a Pelican SUP. This SUP was built in accordance
with strict quality standards and with the benefit of more than 40 years of
expertise. We hope you thoroughly enjoy this product. Please take the time
to read the content in this manual in order to optimize your satisfaction of
this product. We believe that a Pelican SUP offers incomparable value.
We wish you years of enjoyment and rewarding experiences with this
Pe li c a n SUP.
Antoine & Christian Elie
2
It is important for EVERY person to read
WARNINGS, CAUTIONS and NOTES carefully
in this manual.
WARNING
A WARNING indicates a hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION
A CAUTION indicates a hazardous situation which, if
not avoided, could result in minor or moderate injury.
NOTE
A NOTE provides information and sometimes suggests
how to make better use of your SUP.
YOUR SUP
Take the time to familiarize yourself with the various
components of your SUP.
Note: Not all models include each of the parts shown here.
MODEL SHOWN: FLOW 106 MODEL SHOWN: VIBE 80
CARRYING HANDLE
ELA STIC BU NGEE COR DS
BOTTOM GROOVES
FOR INCREASED TRACKING
INTE GRATED R AIL R AMPS
FOR ADD ITIO NAL LE VER AGE
AND BETTER BALANCE
ANTI -SLIP DEC K PAD
FOR SECURE FOOTING
CARRYING HANDLE
SINGLE FLEXIBLE RUBBER FIN
DRAIN PLUG
SIDE CARRYING HANDLE
BOTTLE HOLDER
MOLDED-IN CARRYING HANDLE
EMBOSSED LOGO
ANTI-SLIP ZONE
DRAIN PLUG
FLEXIBLE RUBBER FIN
3
4
GETTING STARTED
Please read all the instructions in this owner’s manual. Keep this manual in a
safe place for future reference if necessary. The manual consists of:
1. Important information
There is a space provided at the beginning of the manual to record important
information about your SUP (page 2). This information will come in handy if you
need to contact our customer service department.
2. Warranty registration card
As outlined in the warranty section (page 8), you can register your warranty
online at our website (www.pelicansport.com) or by mail by filling out and
returning the registration card. You can find the registration card in the center of
this manual. (page 11).
3. Manufacturer’s Declaration of Origin
Certain governments require a Manufacturer’s Declaration of Origin to complete
the registration. The declaration is located in the center of this manual (page 10).
MATERIALS/MANUFACTURING
All Pelican SUP’s are made of high density
polyethylene. If your SUP has a Ram-X™ dome
on it, please read the information below regarding
thermoformed Ram-X™ products.
Your SUP is made of Ram-X™. Its great flexibility offers exceptional shock
resistance. This flexibility increases with heat or with the craft’s prolonged
exposure to the sun but may also slightly warp the hull. The warping disappears
when the hull cools and never affects the craft’s performance.
Ram-X™ is a superior material that was developed and registered in 1978. It
quickly became the benchmark of quality in the industry thanks to its shock
resistance and ability to regain its initial shape following an impact. Widely hailed
by consumers, Ram-X™ is a step above other materials used in the industry.
TRANSPORTATION
Handles located on the SUP enable it to be easily carried by hand
By hand:
• Carry the board by using handles located at the front, rear or center depending
on the model.
• If necessary, use a device to aid in the transport.
By vehicle:
• Remove all accessories before transporting your SUP to avoid losing or damaging
them.
• Before starting your vehicle, ensure that the SUP is properly fastened using a
transportation device on the roof of the vehicle or on a trailer.
• It is recommended that you stop shortly after starting your trip to double check
that all the connections are secure and the SUP will not move during transport.
During a trip in bad weather, remember to regularly check the straps to ensure
they do not lose tension after getting wet.
NOTE
Avoid keeping the SUP firmly attached to your vehicle for an extended period of
time, particularly when exposed to the sun. This could create distortions in the
hull over time.
PRE-LAUNCH CHECKLIST
•
Always wear a proper personal flotation device (PFD).
• Always have an emergency safety kit on hand that is required by applicable law
(whistle, etc.)
• Verify that the hardware used to attach the SUP during transport has been
removed.
• Make sure the drain plug is securely in place and properly fastened (if applicable).
• Make sure the length of your paddle is adjusted according to your size (see details
described in “Basic SUP Principles”).
Loading...