PRODUCT SPECIFICATION
camera solutions
Spectra® IV SE Horizon Series Dome Systems
CRYSTAL CLEAR, INTEGRATED LOOK-UP DOME SYSTEM
Product Features
• Unparalleled Crystal Clear Video at Any Angle
• Vertical Tilt of up to 18° Above Horizontal
• Autofocus, High Resolution Integrated Camera/Optics Package
• Day/Night, 540 TVL, 128X Wide Dynamic Range (WDR), Motion
Detection, and Electronic Image Stabilization
• Autotracking
• Window Blanking
• Camera Title Overlay, 20 User-Definable Characters
• Horizontal and Zone Blanking
• On-Screen Compass and Tilt Display
• Password Protection
• Freeze Frame During Presets
• Built-in Surge and Limited Lightning Protection
• Integrated Passive Unshielded Twisted Pair (UTP) Circuit
An important, but often overlooked, component of a high-speed
dome system is the relationship between the dome bubble and the
camera lens. Special consideration was taken when designing the
®
Spectra
IV SE Horizon lower dome bubble to ensure that an optimal
optical relationship between the lens and bubble was achieved,
providing crystal clear video at long focal lengths and extended
vertical angles.
The Spectra IV SE Horizon dome drive’s unique integrated optics
package incorporates many advanced features that allow the
system to produce high quality video in the most difficult
environments. The camera in the Spectra IV SE Horizon dome drive
features vertical tilt of 18° above the horizon, providing optical clarity
and the ability to look up. LowLight
™
technology allows the camera
to compensate for scenes where minimal light is present. The
camera features advanced 128X wide dynamic range that enables
the system to compensate for scenes where dramatic contrasts in
lighting are present. Electronic image stabilization digitally
reduces blurring of the camera image due to vibration caused by
external sources such as wind and traffic.
Spectra IV SE Horizon back box options include environmental
in-ceiling, standard pendant, and environmental pendant models.
Each back box model features built-in back box memory to store
camera and location-specific dome settings, including labels,
presets, patterns, and zones. A passive UTP circuit is located on
the door assembly for convenient video transmission through twisted
pair wire. For added flexibility, Pelco fiber modules can also be
attached to the door assembly for transmission over single-mode or
multimode fiber.
ENVIRONMENTAL
IN-CEILING MODEL
SD4H36-F-E0
• Low Lux Noise Reduction
• Ability to Add IP Network Capability by Purchasing Optional TXB-N
Module
PENDANT MODEL
SD4H36-PG-0
Spectra IV SE Horizon dome systems feature many software
enhancements that increase performance and make configuration
and operation easy. An internal scheduling clock allows for the
scheduling of presets and patterns. Window blanking enables a
user to configure up to eight, four-sided, user-defined privacy areas.
Password protection prevents unauthorized users from changing
the system settings. Configurable on-screen compass and tilt
display provides positioning information when needed. Intuitive
multilingual on-screen menus can be displayed in English, Spanish,
Portuguese, Italian, French, German, Russian, Polish, Turkish, and
Czech.
Spectra IV SE Horizon’s variable speed capabilities range from a
smooth, fast pan motion of 400 degrees per second to a smooth
“creep” speed of 0.1 degree per second. The system is capable of
continuous 360 degrees rotation and has an “auto flip” feature that
allows the dome to rotate 180 degrees and reposition itself for
uninterrupted viewing of any subject that passes directly beneath
the dome.
In addition, with the optional Pelco TXB-N module, you can add IP
network capability at any time to a Spectra IV dome system without
losing analog viewing and control. By snapping the TXB-N module
into the back box, you can stream network video to a Web browser,
®
Endura
, Digital Sentry®, or third-party software recording solution
allowing integration into virtually any IP-based system.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3434 / REVISED 12/21/12
TECHNICAL SPECIFICATIONS
DOME DRIVE FEATURES
• Vertical Tilt of 18° Above Horizontal
• 256 Presets
• ±0.1° Preset Accuracy
• Electronic Image Stabilization
• Extended Vertical Angles
• Multilanguage Menus (English, Spanish, Portuguese, Italian, French,
German, Russian, Polish, Turkish, and Czech)
• RJ-45 Data Port for Software Update and Setup
• On-Screen Compass, Tilt, and Zoom Display
• 400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed
• Rotating Discreet Liner with Sealed Fixed Bubble
• Window Blanking: Up to 8, Four-Sided, User-Defined Shapes
• 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters
Each or Set to Output Blank Video
• 7 Alarm Inputs
• 1 Auxiliary (Form C) Relay Output and 1 Open Collector Auxiliary Output
(can be alternately configured to operate upon alarm)
• Configurable Locations of Labels and On-Screen Displays
• Action on Alarm: Alarms Can Be Individually Configured for 3 Priority
Levels, to Initiate a Stored Pattern, or to Go to an Associated Preset
When Received
• Resume After Alarm: Allows the Dome to Return to a Previously
Configured State After Alarm Acknowledgement or to its Previous
Position Before Alarm
• Multiple Park and Power-Up Action
• Patterns: Up to 8, On-Screen, User-Defined Configurable Patterns;
Includes Pan, Tilt, Zoom, and Preset Functions
• Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion
to Depth of Zoom
• Variable Scan Speed: Scan Speed Can Be Configurable Between
1–40°/sec
• Pan Motion Allows 0.1–150°/sec Pan Speed
• Configurable Limit Stops for Auto/Random/Frame Scan Modes
• Auto-sensing Protocol (Coaxitron
®
, RS-422 Pelco P and Pelco D); Accepts
Competitive Control Protocol with Optional Translator Card
• Digital Position, Zoom Control, and Feedback Through Pelco D Protocol
• Built-in Menu System for Setup of Configurable Functions
• “Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel
• Configurable Zoom Speeds
BACK BOX FEATURES
4.4
(11.0)
6.4
(16.2)
13.0
(33.1)
9.9 (25.2)
6.0 (15.24)
8.6 (21.8)
Environmental In-Ceiling
• Built-in Memory Stores Camera/Dome Settings
• Single Back Box for Hard Ceiling Applications
• Requires 4.4-Inch Space Above Ceiling and 6.4 Inches Below
• Includes Heater and Fan
• Minimum Ceiling Thickness 0.5-Inch; Maximum 1.75 Inches
• Quick Disconnect to Dome Drive
• Aluminum Construction
• Integrated Passive UTP
Standard and Environmental Pendant
• Standard and Environmental Models
• Built-in Memory Stores Camera/Dome Settings
• Quick Disconnect to Dome Drive
• Aluminum Construction
• Environmental Model Includes Sun Shield, Fan, and Heater
• Integrated Passive UTP
(STANDARD PENDANT MODEL)
6.0 (15.24)
8.6 (21.8)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
Signal Format NTSC (DD4H36)
Scanning System 2:1 Interlace/1:1 progressive scan (user
Image Sensor 1/4-inch EXview HAD
Effective Pixels
NTSC 768 (H) X 494 (V)
PAL 752 (H) X 582 (V)
Horizontal Resolution
NTSC >540 TV Lines
PAL >540 TV Lines
Lens f/1.4 (focal length, 3.3 ~ 119 mm)
Zoom 36X optical, 12X digital
Zoom Speed (optical range) 3.2/4.6/6.6 seconds
Horizontal
Angle of View 57.2° at 3. mm wide zoom; 1.7° at 119 mm
Focus Automatic with manual override
Maximum Sensitivity
at 35 IRE
NTSC/EIA 0.55 lux at 1/60 sec (color)
PAL/CCIR 0.45 lux at 1/50 sec (color)
Sync System Internal/AC line lock, phase adjustable using
White Balance Automatic with manual override
Shutter Speed Automatic (electronic iris)/Manual
NTSC 1/2 ~ 1/30,000
PAL 1/1.5 ~ 1/30,000
Iris Control Automatic Iris Control with manual override
Gain Control Automatic/OFF
Video Output 1 Vp-p, 75 ohms
Video Signal to Noise >50 dB
Wide Dynamic Range 128X
Electronic Image Stabilization Integrated
Image Enhancement Integrated
PAL (DD4H36-X)
selectable)
™
telephoto zoom
0.018 lux at 1/2 sec (color)
0.00018 lux at 1/2 sec (B-W)
0.015 lux at 1/1.5 sec (color)
0.00015 lux at 1/1.5 sec (B-W)
remote control, V-Sync
MECHANICAL (Dome Drive Only)
Pan Movement 360° continuous pan rotation
Vertical Tilt Unobstructed +18° to –92°
Manual Pan/Tilt Speeds
Pan 0.1° to 80°/sec manual operation,
Tilt 0.1° to 40°/sec manual operation
Preset Speeds
Pan 400°/sec
Tilt 200°/sec
150°/sec Turbo
For variable-speed operation an appropriate
controller is required. (With nonvariable
speed control, Spectra IV SE Horizon pan/tilt
speed is 20°/sec)
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• FCC, Class B
• UL /cUL Listed
•C-Tick
• U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2
Meets the following standards:
• NEMA Type 4X, IP66 when installed properly
GENERAL
Construction
Back Box
In-Ceiling Aluminum
Pendant Aluminum
Dome Drive Aluminum, thermo plastic
Bubble Acrylic
Light Attenuation
Smoked f/0.5 light loss
Clear Zero light loss
Cable Entry (back box)
In-Ceiling 0.75-inch conduit fitting
Pendant Through 1.5-inch NPT pendant mount
Weight (approximate) Unit Shipping
Back Box
Environmental
In-Ceiling 2.1 lb (0.95 kg) 3 lb (1.36 kg)
Standard Pendant 2.4 lb (1.09 kg) 4 lb (1.81 kg)
Environmental Pendant 3.5 lb (1.59 kg) 5 lb (2.27 kg)
Dome Drive 3.0 lb (1.36 kg) 4 lb (1.81 kg)
Lower Dome 0.8 lb (0.40 kg) 2 lb (0.90 kg)
Environment
Environmental In-Ceiling Outdoor
Pendant, Standard
and Environmental Indoor/outdoor
Operating Temperature
Standard Pendant (Assumes no wind chill factor)
Maximum 113°F (45°C) absolute maximum;
95°F (35°C) sustained maximum
Minimum 25°F (–4°C) sustained minimum
Environmental
In-Ceiling and
Environmental Pendant (Assumes no wind chill factor)
Maximum 140°F (60°C) absolute maximum;
122°F (50°C) sustained maximum
Minimum –60°F (–51°C) absolute minimum; prevents
icing at sustained minimum of –50°F (–45°C);
de-ices 0.1 inch (2.5 mm) within 3 hours after
power-up
Effective Projected
Area (EPA) 24 square inches (without mount)
50.6 square inches (with IWM Series mount)
ELECTRICAL
Input Voltage 18 to 32 VAC; 24 VAC nominal
Input Power
24 VAC 23 VA nominal (without heater);
24 VDC 0.7 A nominal (without heater);
Fuse 1.25 A
Auxiliary Outputs 2
Alarm Inputs 7
22 to 27 VDC; 24 VDC nominal
73 VA nominal (with heater)
3 A nominal (with heater)
TECHNICAL SPECIFICATIONS
SYSTEM MODEL NUMBERS
Type Back Box Color Lower Dome NTSC PAL
In-Ceiling, Environmental* Black Smoked SD4H36-F-E0 SD4H36-F-E0-X
Clear SD4H36-F-E1 SD4H36-F-E1-X
Pendant, Standard Lt. Gray Smoked SD4H36-PG-0 SD4H36-PG-0-X
Clear SD4H36-PG-1 SD4H36-PG-1-X
Pendant, Environmental* Lt. Gray Smoked SD4H36-PG-E0 SD4H36-PG-E0-X
Clear SD4H36-PG-E1 SD4H36-PG-E1-X
*Environmental dome systems include a heater, fan, and the environmental pendant also includes a sun shield.
COMPONENT MODEL NUMBERS
Back Box Dome Drive Lower Dome
BB4-F-E In-ceiling, black, environmental
BB4-PG Pendant mount, gray, standard
BB4-PG-E Pendant mount, gray, environmental
DD4H36 Day/Night (NTSC) camera (36X) LD4H-0 Smoked
LD4H-1 Clear
OPTIONAL ACCESSORIES
IPS-CABLE Remote monitor cable and software kit
IPS-RDPE-2
TXB Series
†
†
TXB-N Series Network-based communication module that
†
FS85011A
†
If TXB or FS85011A boards are installed, remote upload of system software
will not be possible.
consisting of the Spectra IV remote monitor
interface cable and necessary software for
use with a PC. Refer to www.pelco.com for a
list of compatible devices.
Remote data port. 24 VAC, wall/pole mount
video/data breakout box. Allows ground-level
control/configuration and software upgrades
when used with the IPS-CABLE.
Translator boards for AD™ Manchester,
Hernis, Bosch
Vicon
®
(Philips, Burle), Sensormatic®,
™
, TASS, and NTCIP protocols.
allows you to control and monitor Spectra IV
dome systems over an IP network (in-ceiling
and pendant models only). When TXB-N is
installed in the camera's back box, the
camera system supports Web and Endura
connectivity to Pelco products and open
architecture connectivity to third-party
software. TXB-N provides simultaneous
access to the camera from both an analog and
IP-based control point.
Fiber transmitter sends one unidirectional
composite video channel and 1 bidirectional
data channel over 1 multimode or singlemode fiber optical cable.
RECOMMENDED MOUNTS
In-Ceiling Domes
SD5-P 2' x 2' drop ceiling panel, aluminum
construction. Replaces 2' x 2' ceiling tile.
SCA1 Support rails for BB4-F; for use in ceiling tile
applications.
Pendant Domes
BB5-PCA-BK Pendant conduit adapter, black
IWM Series Wall mount, with or without integral 24 VAC,
100 VA transformer. Can be adapted for
corner, parapet, or pole applications.
MRCA Ceiling mount, black
PP4348 Parapet roof mount
PP350/PP351 Parapet wall/roof mount
SWM Series Compact wall mount. Can be adapted for
corner or pole applications.
RECOMMENDED POWER SUPPLIES
MCS Series Indoor, 24 VAC power supply
WCS Series Outdoor, 24 VAC power supply
Refer to individual power supply specifications for more information.
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
Pelco, the Pelco logo, and other trademarks associa ted with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliate s. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All ot her product names and
Product specifications and availability are subject to change without notice.
services are the property of their respective companies.
©Copyright 2012, Pelco, Inc. All rights reserved.
Loading...