Pelco SD4E23-F0-X, SD4E23-PG-0, SD4E23-PG-E0-X, SD4E23-PG-E1-X, SD4E29-F0 Specsheet
...
PRODUCT SPECIFICATION
camera solutions
Spectra®IV IP Series Network Dome System
H.264, DIGITAL PAN/TILT/ZOOM HIGH-SPEED DOME
Product Features
• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks
• Simultaneous IP and Analog Video and Control
• H.264, MPEG-4, and MJPEG Compression
• Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP,
DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP, QoS, HTTP, HTTPS, LDAP
(client), SSH, SSL, SMTP, FTP, and 802.1x (EAP)
• Multilevel Password Protection
• 3 Autofocus, High Resolution Integrated Camera/Optics Packages
• Autotracking
• Horizontal Zone and Window Blanking
• Sensitivity Down to 0.0015 Lux PAL (36X Models)
• On-Screen Compass and Tilt Display
• Up to 2 Simultaneous Video Streams
• Web Viewing
• Open IP Standards
• ONVIF v1.02 Conformant
• Bidirectional Full-Duplex Audio
Spectra®IV IP dome systems incorporate all of the features and
functions of Spectra IV (including analog), while allowing you to
control and monitor video over an IP network from virtually anywhere
in the world. Spectra IV IP is a high-speed dome with a built-in
100Base-TX network interface for live streaming to any network
application.
Spectra IV IP supports two simultaneous video streams. The two
streams can be compressed in MJPEG, MPEG-4, and H.264 formats
across several resolution configurations. The streams can be
configured in a variety of frame rates, bit rates, and group of pictures
(GOP) structures for additional bandwidth administration. The H.264
compression video files are up to 20 times smaller than MJPEG,
making network video storage more affordable.
Spectra IV IP allows you to view and control analog video while
viewing, recording, and controlling network IP video. There is no need
to abandon your current analog infrastructure if you are making the
move to network video as a recording solution. Continue to monitor
and control video in the analog domain while recording video in the
network domain, and let Spectra IV IP’s professional compression
method do the work for you without the need for external encoders.
Spectra IV IP dome system consists of a back box, a dome drive, and
a lower dome. These three system components are interchangeable
with other Spectra IV IP dome systems, making retrofitting and
application adjustments simple.
Spectra IV IP features several back box options. All back boxes feature
built-in memory, which can be used to store camera and locationspecific dome settings, including labels, presets, patterns, and zones.
All cameras in Spectra IV IP dome drives feature an EXview HAD
imager for increased sensitivity and LowLight™technology allowing
the cameras to compensate for scenes where minimal light is present.
Both the 29X and the 36X cameras feature built-in motion detection
and advanced 128X wide dynamic range (WDR) that enables the
system to compensate for scenes where dramatic contrasts in lighting
are present. The 36X day/night camera’selectronicimagestabilization
digitally reduces blurring of the camera image due to vibration caused
by external sources, such as wind and traffic.
Web Interface
Spectra IV IP uses a standard Web browser for powerful remote
setup and administration.
Network protocols such as Secure Sockets Layer (SSL) configuration
for security certificates, Secure Shell (SSH) for remote logon, and
Quality of Service (QoS) for priority or guarantee data flow can be
managed using a Web browser.
Video Systemization
Spectra IV IP easily connects to Pelco IP and hybrid systems such as
®
version 1.5 (or later), MPEG-4; Endura version 2.0 (or later),
Endura
H.264; Digital Sentry
later); DX4700/DX4800 Series 1.1 (or later); DX4700HD/DX4800HD
Series v2.0 (or later); and DVR5100 version 1.5.4 (or later). The camera
also features open architecture connectivity to third-party software.
Pelco offers an application programming interface (API) and software
developer’s kit (SDK) for interfacing with Pelco’s IP cameras.
®
version 7.3 (or later); DX8100 version 2.0 (or
™
International Standards
Organization Registered Firm;
ISO 9001 QualitySystem
C3468 / REVISED 10-29-14
TECHNICAL SPECIFICATIONS
CAMERA/OPTICS
Day/Night (36X) Day/Night (29X) Day/Night (23X)
Signal Format NTSC (DD436)
Scanning System Interlace/Progressive selectable Interlace/Progressive selectable 2:1 Interlace
Image Sensor
Effective Pixels
NTSC
PAL
Horizontal Resolution
NTSC
PAL
Lens f/1.4 (focal length, 3.3 ~ 119 mm) f/1.4 (focal length, 3.3 ~ 95.7 mm) f/1.6 (focal length, 3.6 ~ 82.8 mm)
Zoom 36X optical, 12X digital 29X optical, 12X digital 23X optical, 12X digital
Zoom Speed (optical range) 3.2/4.6/6.6 seconds 3.2/4.6/6.6 seconds 2.9/4.2/5.8 seconds
Horizontal
Angle of view
Focus
Maximum Sensitivity
NTSC/EIA
PAL/CCIR
Sync System Internal/AC line lock, phase adjustable
White Balance Automatic with manual override Automatic with manual override Automatic with manual override
Shutter Speed
NTSC
PAL
Iris Control Automatic iris control with manual
Gain Control Automatic/OFF Automatic/OFF Automatic/OFF
Video Output 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms
Video Signal-to-Noise >50 dB > 50 dB >50 dB
Wide Dynamic Range 128X 128X —
Electronic Image Stabilization Integrated/Selectable — —
Auto Sharpness Integrated/Selectable Integrated/Selectable —
Video Motion Detection Integrated Integrated —
PAL (DD436-X)
1/4-inch EXview HAD
768 (H) X 494 (V)
752 (H) X 582 (V)
>540 TV Lines
>540 TV Lines
57.2° at 3.3 mm wide zoom;
1.7° at 119 mm telephoto zoom
Automatic with manual override
90% scene reflectance; f/1.4; 27 dB gain;
35 IRE (245 mV equivalent)
0.55 lux at 1/60 sec (color)
0.018 lux at 1/2 sec (color)
0.055 lux at 1/60 sec (B-W)
0.0018 lux at 1/2 sec (B-W)
0.45 lux at 1/50 sec (color)
0.015 lux at 1/1.5 sec (color)
0.045 lux at 1/50 sec (B-W)
0.0015 lux at 1/1.5 sec (B-W)
using remote control, V-Sync
Automatic (electronic iris)/Manual
1/2 ~ 1/30,000
1/1.5 ~ 1/30,000
override
™
NTSC (DD429)
PAL (DD429-X)
1/4-inch EXview HAD
768 (H) X 494 (V)
752 (H) X 582 (V)
> 540 TV Lines
> 540 TV Lines
57.2° at 3.4 mm wide zoom;
2.2° at 95.7 mm telephoto zoom
Automatic with manual override
90% scene reflectance; f/1.4; 27 dB gain;
35 IRE (245 mV equivalent)
0.55 lux at 1/60 sec (color)
0.018 lux at 1/2 sec (color)
0.055 lux at 1/60 sec (B-W)
0.0018 lux at 1/2 sec (B-W)
0.45 lux at 1/50 sec (color)
0.015 lux at 1/1.5 sec (color)
0.045 lux at 1/50 sec (B-W)
0.0015 lux at 1/1.5 sec (B-W)
Internal/AC line lock, phase adjustable
using remote control, V-Sync
Automatic (electronic iris)/Manual
1/2 ~ 1/30,000
1/1.5 ~ 1/30,000
Automatic iris control with manual
override
NTSC (DD423)
PAL (DD423-X)
1/4-inch EXview HAD
768 (H) X 494 (V)
752 (H) X 582 (V)
540 TV Lines
540 TV Lines
54° at 3.6 mm wide zoom;
2.5° at 82.8 mm telephoto zoom
Automatic with manual override
35 IRE
0.65 lux at 1/60 sec (color)
0.15 lux at 1/60 sec (B-W)
0.55 lux at 1/50 sec (color)
0.12 lux at 1/50 sec (B-W)
Internal/AC line lock, phase adjustable
using remote control, V-Sync
Automatic (electronic iris)/Manual
1/2 ~ 1/30,000
1/1.5 ~ 1/30,000
Automatic iris control with manual
override
TECHNICAL SPECIFICATIONS
VIDEO
Video Encoding H.264 base profile, MPEG-4, and MJPEG
Video Streams Up to 2 simultaneous streams; the second
Frame Rate Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5,
Available Resolutions Resolution MJPEG H.264 Base Profile MPEG-4
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),
Users
Unicast Up to 20 simultaneous users depending on
Multicast Unlimited users H.264 or MPEG-4
Security Access Password protected
Software Interface Web browser view and setup
Pelco System Integration Endura 1.5 or later (MPEG-4) or Endura 2.0 or
Open API Pelco API or ONVIF v1.02
Minimum System Requirements
Processor Intel
Operating System Microsoft®Windows®XP, Windows Vista®,
Memory 512 MB RAM
Network Interface Card 100 megabits (or greater)
Monitor Minimum of 1024 x 768 resolution, 16- or
Web Browser Internet Explorer®7.0 (or later) or Mozilla
Media Player
†
stream is variable based on the setup of the
primary stream
4, 3, 2, 1 (dependent upon coding, resolution,
and stream configuration)
Width Height Format
Maximum
IPS
Recommended
Bit Rate
Maximum
IPS
Recommended
Bit Rate
Maximum
IPS
Recommended
704 480 NTSC 30 ips 5.4 Mbps 30 ips 1.9 Mbps 30 ips 2.0 Mbps
352 240 NTSC 30 ips 1.3 Mbps 30 ips 0.5 Mbps 30 ips 0.6 Mbps
704 576 PAL 25 ips 5.4 Mbps 25 ips 1.9 Mbps 25 ips 2.0 Mbps
UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6*,
SNMP, QoS, HTTP, HTTPS, LDAP (client), SSH,
SSL, SMTP, FTP, and 802.1x (EAP)
resolution settings (2 guaranteed streams)
later (H.264); Digital Sentry 7.3 IP bundle 3 or
later; DX8100 Series 2.0 or later; DX4700/
DX4800 Series 1.1 or later; DX4700HD/
DX4800HD Series v2.0 or later; and DVR5100
version 1.5.4 or later
®
Pentium®4 microprocessor, 1.6 GHz
Windows 7, or Mac®OS X 10.4 (or later)
32-bit pixel color resolution
®
Firefox®3.0 (or later)
Pelco Media Player or QuickTime®7.6.5 for
Windows XP, Windows Vista, or QuickTime
7.6.4 for Mac OS X 10.4
Bit Rate
*Supports mixed IPv4 and IPv6 installations, but not IPv6-only deployments.
†
This product is not compatible with QuickTime version 7.6.4 for Windows XP
or Windows Vista. If you have this version installed on your PC, you will
need to upgrade to QuickTime version 7.6.5.
Loading...