• 3 Autofocus, High Resolution Integrated Camera/Optics Packages
• Autotracking
• Horizontal Zone and Window Blanking
• Sensitivity Down to 0.0015 Lux PAL (36X Models)
• On-Screen Compass and Tilt Display
• Up to 2 Simultaneous Video Streams
• Web Viewing
• Open IP Standards
• ONVIF v1.02 Conformant
• Bidirectional Full-Duplex Audio
Spectra®IV IP dome systems incorporate all of the features and
functions of Spectra IV (including analog), while allowing you to
control and monitor video over an IP network from virtually anywhere
in the world. Spectra IV IP is a high-speed dome with a built-in
100Base-TX network interface for live streaming to any network
application.
Spectra IV IP supports two simultaneous video streams. The two
streams can be compressed in MJPEG, MPEG-4, and H.264 formats
across several resolution configurations. The streams can be
configured in a variety of frame rates, bit rates, and group of pictures
(GOP) structures for additional bandwidth administration. The H.264
compression video files are up to 20 times smaller than MJPEG,
making network video storage more affordable.
Spectra IV IP allows you to view and control analog video while
viewing, recording, and controlling network IP video. There is no need
to abandon your current analog infrastructure if you are making the
move to network video as a recording solution. Continue to monitor
and control video in the analog domain while recording video in the
network domain, and let Spectra IV IP’s professional compression
method do the work for you without the need for external encoders.
Spectra IV IP dome system consists of a back box, a dome drive, and
a lower dome. These three system components are interchangeable
with other Spectra IV IP dome systems, making retrofitting and
application adjustments simple.
Spectra IV IP features several back box options. All back boxes feature
built-in memory, which can be used to store camera and locationspecific dome settings, including labels, presets, patterns, and zones.
All cameras in Spectra IV IP dome drives feature an EXview HAD
imager for increased sensitivity and LowLight™technology allowing
the cameras to compensate for scenes where minimal light is present.
Both the 29X and the 36X cameras feature built-in motion detection
and advanced 128X wide dynamic range (WDR) that enables the
system to compensate for scenes where dramatic contrasts in lighting
are present. The 36X day/night camera’selectronicimagestabilization
digitally reduces blurring of the camera image due to vibration caused
by external sources, such as wind and traffic.
Web Interface
Spectra IV IP uses a standard Web browser for powerful remote
setup and administration.
Network protocols such as Secure Sockets Layer (SSL) configuration
for security certificates, Secure Shell (SSH) for remote logon, and
Quality of Service (QoS) for priority or guarantee data flow can be
managed using a Web browser.
Video Systemization
Spectra IV IP easily connects to Pelco IP and hybrid systems such as
®
version 1.5 (or later), MPEG-4; Endura version 2.0 (or later),
Endura
H.264; Digital Sentry
later); DX4700/DX4800 Series 1.1 (or later); DX4700HD/DX4800HD
Series v2.0 (or later); and DVR5100 version 1.5.4 (or later). The camera
also features open architecture connectivity to third-party software.
Pelco offers an application programming interface (API) and software
developer’s kit (SDK) for interfacing with Pelco’s IP cameras.
MulticastUnlimited users H.264 or MPEG-4
Security AccessPassword protected
Software InterfaceWeb browser view and setup
Pelco System IntegrationEndura 1.5 or later (MPEG-4) or Endura 2.0 or
Open APIPelco API or ONVIF v1.02
Minimum System Requirements
ProcessorIntel
Operating SystemMicrosoft®Windows®XP, Windows Vista®,
Memory512 MB RAM
Network Interface Card100 megabits (or greater)
MonitorMinimum of 1024 x 768 resolution, 16- or
Web BrowserInternet Explorer®7.0 (or later) or Mozilla
Media Player
†
stream is variable based on the setup of the
primary stream
4, 3, 2, 1 (dependent upon coding, resolution,
and stream configuration)
later (H.264); Digital Sentry 7.3 IP bundle 3 or
later; DX8100 Series 2.0 or later; DX4700/
DX4800 Series 1.1 or later; DX4700HD/
DX4800HD Series v2.0 or later; and DVR5100
version 1.5.4 or later
®
Pentium®4 microprocessor, 1.6 GHz
Windows 7, or Mac®OS X 10.4 (or later)
32-bit pixel color resolution
®
Firefox®3.0 (or later)
Pelco Media Player or QuickTime®7.6.5 for
Windows XP, Windows Vista, or QuickTime
7.6.4 for Mac OS X 10.4
Bit Rate
*Supports mixed IPv4 and IPv6 installations, but not IPv6-only deployments.
†
This product is not compatible with QuickTime version 7.6.4 for Windows XP
or Windows Vista. If you have this version installed on your PC, you will
need to upgrade to QuickTime version 7.6.5.
• 400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed
• Rotating Discreet Liner with Sealed Fixed Bubble
• Window Blanking: Up to 8, Four-Sided, User-Defined Shapes
• 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters
Each or Set to Output Blank Video
• 7 Alarm Inputs
• 1 Auxiliary (Form C) Relay Output and 1 Open Collector Auxiliary Output
(can be alternately configured to operate upon alarm)
• Configurable Locations of Labels and On-Screen Displays
• Action on Alarm: Alarms Can Be Individually Configured for 3 Priority
Levels, to Initiate a Stored Pattern, or to Go to an Associated Preset
When Received
• Resume After Alarm: Allows the Dome to Return to a Previously
Configured State After Alarm Acknowledgement or to its Previous
Position Before Alarm
• Multiple Park and Power-Up Action
• Patterns: Up to 8, On-Screen, User-Defined Configurable Patterns;
Includes Pan, Tilt, Zoom, and Preset Functions
• Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion
to Depth of Zoom
• Variable Scan Speed: Scan Speed Can Be Configurable Between
1 to 40°/sec
• Pan Motion Allows 0.1° to 150°/sec Pan Speed
• Configurable Limit Stops for Auto/Random/Frame Scan Modes
• Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D,
Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional
Translator Card
• Digital Position and Zoom Control and Feedback Through Pelco D Protocol
• Built-in Menu System for Setup of Configurable Functions
• “Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel
Smokedf/0.5 light loss
ClearZero light loss
Chromef/2.0 light loss
Goldf/2.0 light loss
Cable Entry (back box)
In-Ceiling0.75-inch conduit fitting
PendantThrough 1.5-inch NPT pendant mount
Weight (approximate)UnitShipping
In-Ceiling2.4 kg (5.2 lb)3.6 kg (7.9 lb)
Environmental In-Ceiling2.8 kg (6.2 lb)4.5 kg (9.9 lb)
Standard Pendant3.0 kg (6.5 lb)5.0 kg (11.0 lb)
Environmental Pendant3.5 kg (7.6 lb)5.4 kg (11.9 lb)
Heavy-Duty In-Ceiling*3.3 kg (7.3 lb)5.4 kg (11.9 lb)
Heavy-Duty Pendant*4.5 kg (9.8 lb)7.3 kg (16.1 lb)
Heavy-Duty Environmental
Pendant*4.5 kg (9.8 lb)7.3 kg (16.1 lb)
Stainless Steel4.6 kg (10.1 lb)7.3 kg (16.1 lb)
Environment
In-CeilingIndoor
Environmental In-CeilingOutdoor
Pendant, Standard and
EnvironmentalIndoor/outdoor
Heavy-Duty In-CeilingIndoor
Heavy-Duty Pendant,
Standard & Environmental Indoor/outdoor
Stainless SteelIndoor/outdoor
Operating Temperature
In-Ceiling0° to 50°C (32° to 122°F)
Standard Pendant(Assumes no wind chill factor)
Maximum45°C (113°F) absolute maximum; 35°C (95°F)
sustained maximum
Minimum–4°C (25°F) sustained minimum
Environmental In-Ceiling
and Environmental Pendant(Assumes no wind chill
factor)
Maximum60°C (140°F) absolute maximum;
50°C (122°F) sustained maximum
Minimum–51°C (–60°F) absolute minimum; prevents
icing at sustained minimum of –45°C (–50°F);
de-ices 2.5 mm (0.1 inch) within 3 hours after
power-up
Heavy-Duty In-Ceiling0° to 50°C (32° to 122°F)
Heavy-Duty Pendant0° to 50°C (32° to 122°F) absolute maximum;
0° to 50°C (32° to 122°F) sustained maximum
Heavy-Duty
Environmental Pendant(Assumes no wind chill factor)
Maximum60°C (140°F) absolute maximum;
50°C (122°F) sustained maximum
Minimum–51°C (–60°F) absolute minimum; minimal
icing at sustained minimum of –45°C (–50°F);
prevents icing at sustained minimum of
–40°C (–40°F); de-ices 2.5 mm (0.1 inch)
within 3 hours after power-up
Stainless Steel(Assumes no wind chill factor)
Maximum60°C (140°F) absolute maximum;
50°C (122°F) sustained maximum
Minimum–51°C (–60°F) absolute minimum; minimal
icing at sustained minimum of –45°C (–50°F);
prevents icing at sustained minimum of
–40°C (–40°F); de-ices 2.5 mm (0.1 inch)
within 3 hours after power-up
Effective Projected Area (EPA) 132.257 sq cm (20.5 sq in.) without mount;
303.225 sq cm (47 sq in.) with IWM Series
mount
MECHANICAL
(Dome Drive Only)
Pan Movement360° continuous pan rotation
Vertical TiltUnobstructed +2° to –92°
Manual Pan/Tilt Speeds
Pan0.1° to 80°/sec manual operation, 150°/
sec Turbo
Tilt0.1° to 40°/sec manual operation
Preset Speeds
Pan400°/sec
Tilt200°/sec
For variable-speed operation, an appropriate
controller isrequired;(with nonvariable speed
control, Spectra IV IP pan/tilt speed is
20°/sec)
AUDIO
StreamingBidirectional: full or half duplex
Input/OutputTerminal block, analog for microphone and
speaker; 600-ohm differential; 1 Vp-p
maximum signal level
CompressionG.711 PCM 8 bit, 8 kHz mono at 64 kbit/sec
ELECTRICAL
PortsRJ-45 connector for 100Base-TX
Auto MDI/MDI-X
Autonegotiate/Manual setting
Cabling TypeCat5 or better for 100Base-TX
Input Voltage18 to 32 VAC; 24 VAC nominal
22 to 27 VDC; 24 VDC nominal
Input Power
24 VAC23 VA nominal (without heater);
73 VA nominal (with heater)
24 VDC0.7 A nominal (without heater);
3 A nominal (with heater)
Fuse1.25 A
Auxiliary Outputs2
Alarm Inputs7
*Add 0.90 kg (2 lb) to the total weight if the system includes a lower dome cage.
• Meets NEMA Type 4X, IP66 when installed properly (BB4E-F-E, BB4E-PB,
BB4E-PG, BB4E-PG-E, BB4EHD-PG, BB4EHD-PG-E, and BB4E-PSG-E)
• Meets NEMA Type 1, IP40 (BB4E-F and BB4EHD-F)
OPTIONAL ACCESSORIES
HD-KEYS1 set of keys for heavy-duty lower dome
IPS-CABLERemote monitor cable and software kit
consisting of the Spectra IV remote monitor
interface cable and necessary software for
use with a PC; refer to www.pelco.com for a
list of compatible devices
IPS-RDPE-2Remote data port; 24 VAC, wall/pole mount
video/data breakout box; allows ground-level
control/configuration when used with the
IPS-CABLE
LD5F-2*Flush in-ceiling lower dome with chrome
bubble (f/2.0 light loss).
LD5F-3*Flush in-ceiling lower dome with gold bubble
(f/2.0 light loss).
LD53PB-2*Pendant lower dome with black trim and
chrome bubble (f/2.0 light loss).
LD53PB-3*Pendant lower dome with black trim and gold
bubble (f/2.0 light loss).
SECURE-SLA LicenseEnables Information Assurance compliant
mode of operation
* Not recommended for outdoor use due to possible light reflections.
RECOMMENDED MOUNTS
In-Ceiling Domes
SD5-P2' x 2' drop ceiling panel, aluminum
construction; replaces 2' x 2' ceiling tile
SCA1Support rails for BB4N-F; for use in ceiling tile
applications
Pendant Domes
BB5-PCA-BKPendant conduit adapter, black
BB5-PCA-GYPendant conduit adapter, gray
IWM SeriesWall mount, with or without integral 24 VAC,
100 VA transformer; black or gray finish; can
be adapted for corner, parapet or pole
application
MRCACeiling mount, black
PP4348Parapet roof mount
PP350/PP351Parapet wall/roof mount
SWM SeriesCompact wall mount, black or gray finish; can
be adapted for corner or pole applications
IDM4012SSStainless steel wall mount with feedthrough
capabilities
RECOMMENDED POWER SUPPLIES
MCS SeriesIndoor, 24 VAC power supply
WCS SeriesOutdoor, 24 VAC power supply
Refer to individual power supply specifications for more information.