PRODUCT SPECIFICATION
Heavy-Duty Spectra® IV SE Series
BACK BOX AND LOWER DOME
camera solutions
Product Features
• Tough, Heavy-Duty Construction
• Improved Bubble Design
– 0.090-Inch Injection Molded Polycarbonate
– Increased Optical Clarity
– 3.5X Stronger Than Previous Heavy-Duty Bubbles
– Available in Clear and Smoked Bubble
• Trim Rings Are Constructed of Thick Aluminum
• Protective Cage for Lower Dome (Optional)
• Built-in Back Box Memory
• 2 Auxiliary Outputs
• 7 Alarm Inputs
• Integrated Passive UTP Circuit
• Compatible with 29X and 36X Spectra
• In-Ceiling and Pendant Models Available
• Indoor/Outdoor Applications
• Pendant Models Meet NEMA Type 4X and IP66 Standards
• Ability to Add IP Network Capability by Purchasing Optional TXB-IP
Module
®
IV SE Dome Drives
Pelco’s Heavy-Duty Spectra® IV SE Series is ideal for installations
where structural integrity and resistance to vandalism are a priority.
Dual wall construction, added thickness, and a geometric design
enhance the overall durability of the enclosure.
Three Heavy-Duty Spectra IV SE Series back box models are
available. The in-ceiling model (BB4HD-F) has a reinforced mounting
system for added security. The indoor pendant (BB4HD-PG) and
environmental pendant (BB4HD-PG-E) models are strengthened by a
thick shroud and dual wall construction, and meet NEMA Type 4X and
IP66 standards. The environmental pendant includes a heater and
fan.
IN-CEILING MODEL
BB4HD-F AND LD53HDF-1
ENVIRONMENTAL PENDANT
BB4HD-PG-E AND LD53HDCPB-1
(SHOWN WITH IWM-GY WALL MOUNT)
For installations that face the highest threat of vandalism, models are
available with a protective cage (optional). The cage is designed to
increase the protection of the unit’s bubble with minimal obstruction
of the viewed scene. The camera automatically focuses through the
cage’s bars at medium to high zoom settings, eliminating interference
(as shown below). The cage is removable for cleaning purposes. Cage
hardware is only accessible when the lower dome is removed.
The Heavy-Duty Spectra IV SE Series has all the features of the
Spectra IV SE dome system (built-in back box memory, two auxiliary
outputs, seven alarm inputs, integrated passive UTP circuit) and is
also compatible with all Spectra IV SE dome drives.
The lower dome of the
Heavy-Duty
Spectra IV
SE Series
meets Pelco’s
stringent standards for optical clarity and strength. The lower dome
features a clear or smoked 0.090-inch polycarbonate bubble that is
3.5 times stronger than previous heavy-duty bubbles. The trim ring is all
aluminum construction with two barrel-type key locks to increase the
tamper resistance of the unit.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C3419 / REVISED 12-21-12
TECHNICAL SPECIFICATIONS
SYSTEM MODEL NUMBERS
Back Box Type
In-Ceiling
Indoor
Pendant
Environmental
Pendant
Lower
Dome
Clear
Cage 29X Day/Night
No SD429-HF1 SD436-HF1
Yes SD429-HCF1 SD436-HCF1
No SD429-HP1 SD436-HP1
Yes SD429-HCP1 SD436-HCP1
No SD429-HPE1 SD436-HPE1
Yes SD429-HCPE1 SD436-HCPE1
COMPONENT MODEL NUMBERS
Back Box Lower Dome* Dome Drive
BB4HD-F In-ceiling, gray
BB4HD-PG Pendant, gray
BB4HD-PG-E Environmental pendant, gray
*Also available with smoked bubble. To order, replace the number 1 with a 0 (zero) in the model number (for example: SD436-HF0 or LD53HDF-0).
†
For PAL and CCIR models add “-X” suffix to part number (for example: SD429-HF1-X or SD436-HCF1-X).
‡
DD5-FM accepts camera and lens combinations including a BNC connector up to 12.70 x 6.99 x 6.99 cm (5.00" D x 2.75" W x 2.75" H).
†
36X Day/Night
LD53HDF-1 Clear, in-ceiling
LD53HDCF-1 Clear, in-ceiling with cage
LD53HDPB-1 Clear, pendant
LD53HDCPB-1 Clear, pendant with cage
†
DD429 Day/night (NTSC) camera (29X)
DD436 Day/night (NTSC) camera (36X)
DD5-FM‡ Removable, fixed mount bracket only
(camera and lens not included)
†
GENERAL
Construction
Back Box Aluminum
Lower Dome Clear or smoked polycarbonate, 0.09-inch
Cage Thickness 0.12 x 0.30 cast stainless steel
Cage Color Black, for maximum discreetness
Cable Entry (Back Box)
In-ceiling 0.75-inch conduit fitting
Pendant Through 1.5-inch NPT pendant mount
Weight (approximate)
Back Box Unit Shipping
In-ceiling 2.17 lb (0.98 kg) 6 lb (2.72 kg)
Pendant 4.45 lb (2.02 kg) 6 lb (2.72 kg)
Environmental Pendant 4.75 lb (2.15 kg) 5 lb (2.27 kg)
Lower Dome
In-ceiling 1.6 lb (0.73 kg) 3 lb (1.36 kg)
In-ceiling w/cage 3.6 lb (1.63 kg) 5 lb (2.27 kg)
Pendant 1.83 lb (0.83 kg) 3 lb (1.36 kg)
Pendant w/cage 3.83 lb (1.74 kg) 4 lb (1.81 kg)
Environment
In-ceiling Indoor only
Pendant Indoor/outdoor
Environmental Pendant Indoor/outdoor
Dimensions
Pendant
In-ceiling
Operating Temperature
In-ceiling 32° to 122°F (0° to 50°C)
Pendant 32° to 140°F (0° to 60°C) absolute maximum
Environmental Pendant (Assumes no wind chill factor; for detailed
Maximum 140°F (60°C) absolute maximum;
Minimum –60°F (–51°C) absolute minimum; minimal
Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
thick
9.7" W x 10.1" H (24.64 cm x 25.65 cm)
9.75" W x 8.5" H (24.77 cm x 21.59 cm)
operating temperature; 32° to 122°F (0° to
50°C) sustained maximum operating
temperature
test conditions, contact Pelco)
122°F (50°C) sustained maximum
icing at sustained minimum of –50°F (–45°C);
prevents icing at sustained minimum of
–40°F (–40°C); de-ices 0.1 inch (2.5 mm)
within 3 hours after power-up
ELECTRICAL
Input Voltage 18 to 32 VAC; 24 VAC nominal
Input Power
24 VAC 23 VA nominal (indoor, without heater)
24 VDC 0.7 A nominal (indoor, without heater)
Fuse 1.25 A
Auxiliary Outputs 2
Alarm Inputs 7
22 to 27 VDC; 24 VDC nominal
73 VA nominal (outdoor, with heater)
3 A nominal (outdoor, with heater)
CERTIFICATIONS/RATINGS/PATENTS
• CE, Class B
• FCC, Class B
• UL /cUL Listed
•C-Tick
• S Mark for Argentina
• Meets NEMA Type 4X, IP66 standards (Pendant models)
• Meets NEMA Type 1, IP40 standards (In-ceiling models)
• U.S. Patents D457,904 and D460,978
OPTIONAL ACCESSORIES
HD-KEYS 1 set of keys for heavy duty lower dome
IPS-CABLE Remote monitor cable and software kit
IPS-RDPE-2
TXB Series
TXB-N Series
FS85011A
§
If TXB or FS85011A boards are installed, remote code upload of system will
not be possible.
§
§
§
Remote data port
Translator boards for AD Manchester, Hernis,
®
(Philips, Burle), TASS, and NTCIP
Bosch
protocols
Network-based communication module that
allows you to control and monitor Spectra IV
dome systems over an IP network (in-ceiling
and pendant models only). When TXB-N is
installed in the camera's back box, the camera
system supports Web and Endura connectivity
to Pelco products and open architecture
connectivity to third-party software. TXB-N
provides simultaneous access to the camera
§
Pelco, the Pelco logo, and other trademarks associa ted with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliate s. ONVIF and the
Product specifications and availability are subject to change without notice.
from both an analog and IP-based control point.
Fiber transmitter modules
ONVIF logo are trademarks of ONVIF Inc. All ot her product names and
services are the property of their respective companies.
©Copyright 2012, Pelco, Inc. All rights reserved.