Pelco PMC901-X User Manual

®

PELCO

ON

O

FF

PO

W

ER

PMC901-X

9-Inch Color

Video Monitor

Installation/

Operation Manual

C1911M (4/98)

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com

In North America and Canada: Tel [phone] or FAX [phone]

International Customers: Tel [phone] or FAX [phone]

CONTENTS

Section Page

1.0 GENERAL ..................................................................................................3

1.1 IMPORTANT SAFEGUARDS AND WARNINGS ...............................3

1.2 REGULA TORY NOTICES..................................................................5

1.3 UNP ACKING INSTRUCTIONS ..........................................................5

2.0 DESCRIPTION ..........................................................................................6

2.1 MODEL .............................................................................................. 6

2.2 CERTIFICA TIONS .............................................................................6

3.0 INSTALLATION ..........................................................................................7

3.1 MOUNTING .......................................................................................7

3.2 CONNECTIONS ................................................................................7

4.0 OPERA TION ..............................................................................................9

5.0 MAINTENANCE ........................................................................................10

6.0 SPECIFICATIONS ....................................................................................11

7.0 WARRANTY AND RETURN INFORMATION ...........................................12

LIST OF ILLUSTRATIONS

Figure Page

1 Monitor Connections..........................................................................8

2 Front Panel Controls ..........................................................................9

LIST OF TABLES

Table Page

A Video Coaxial Cable Wiring Distances ..............................................7

REVISION HISTORY

Manual # Date Comments

C1911M 4/98 Original version

2 Pelco Manual C1911M (4/98)

1.0 GENERAL

1.1 IMPORTANT SAFEGUARDS AND WARNINGS

Please thoroughly familiarize yourself with the information in this manual prior to
installation and operation.

Read Instructions

Safety and operating instructions should be read before the monitor is operated.

Retain Instructions

Safety and operating instructions should be retained for future reference.

Heed Warnings

All warnings on the monitor and in the operating instructions should be followed.

Follow Instructions

All operating and use instructions should be followed.

Cleaning

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Attachments

Use only attachments recommended by Pelco.

Water and Moisture

Do not use this monitor near water - for example, near a kitchen sink, in a wet
basement or near a swimming pool - unless the monitor is specifically marked “For
Use in Wet Locations.”

Accessories

Do not place this monitor on an unstable cart, stand, table, or mount. The monitor
may fall, causing serious injury to a child or adult and serious damage to the moni­tor. Use only with a mount recommended by Pelco. When mounting the monitor,
follow Pelco’s installation instructions, and use only mounting accessories recom­mended by Pelco.

Cart & Stand

A monitor and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the monitor and cart combination to over­turn.

Ventilation

Slots and openings in the cabinet are provided for ventilation to ensure reliable
operation of the monitor and to protect it from overheating. These openings must
not be blocked or covered. The openings should never be blocked by placing the
monitor on furniture, carpet, or similar surfaces. The monitor should never be placed
near or over radiators or heat registers. This monitor should not be placed in a built­in installation, such as a bookcase or rack, unless proper ventilation is provided.

Power Sources

This monitor should only be operated from the type of power source indicated on
the back panel label. If you are not sure of the type of power to your installation
location, consult your local electrical building official or power company.

Grounding

This monitor is equipped with a grounding plug. This plug will only fit into a ground­ing outlet. This is a safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the grounding
plug since it is provided to ensure your safety.

Pelco Manual C1911M (4/98) 3

Power-Cord Protection

Power cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them. When routing power cords, pay attention to
cords at plugs, convenience receptacles, and the point where they exit from the
monitor.

Overloading

Do not connect more power plugs to one outlet than it can safely handle. This may
overload wall outlets and extension cords and can result in a risk of fire or electric
shock.

Object and Liquid Entry

Never push objects of any kind through openings in this monitor as they may touch
dangerous voltage points or “short-out” electrical parts and could result in a fire or
electric shock. Never spill liquid of any kind on the monitor.

Servicing

Do not attempt to service this monitor yourself. Opening or removing covers may
expose you to dangerous voltages or other hazards. Refer all servicing to qualified
service personnel.

Damage Requiring Servicing

Unplug this monitor from the wall outlet and refer servicing to qualified service
personnel under the following conditions:

a. When the power cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the monitor.
c. If the monitor is not marked “Suitable for Wet Locations” and it has been ex-

posed to rain or water.

WARNING:

This prod­uct has been evaluated
for INDOOR USE ONLY
unless it bears the mark­ing “For Use in Wet Lo­cations.”

WARNING:

To reduce
the risk of electric shock
hazard, do not remove
the monitor cover. This
monitor cannot be ser­viced by the user and
must be sent to a quali­fied service person for
repair.

d. If the monitor does not operate normally by following the operating instruc-

tions, adjust only those controls that are covered by the operating instructions.
Improper adjustment of other controls may result in damage and may require
extensive work by a qualified technician to restore the monitor to its normal

operation.
e. If the monitor has been dropped or the cabinet has been damaged.
f. When the monitor exhibits a distinct change in performance - this indicates a

need for service.

Replacement Parts

When replacement parts are required, be sure the service technician has used
replacement parts specified by Pelco or have the same characteristics as the origi­nal part. Improper substitutions may result in fire, electric shock, or other hazards.

Safety Checks

Upon completion of any service or repairs to this monitor, ask your service techni­cian to perform safety checks to determine that the monitor is in proper operating
condition.

4 Pelco Manual C1911M (4/98)