Pelco PM14 Specsheet
PRODUCT SPECIFICATION
PM14 Mount
WALL MOUNT, LIGHT DUTY, PAN/ TILT
camera solutions
Product Features
• Low Cost Wall Mount
• Decorator Styling
• Supports up to 20 Pounds (9.07 kg)
• Accommodates Light Duty Pan/Tilts
• Can Be Adapted for Pole Applications With Use of PA101 Adapter
The
PM14
is a light duty pan/tilt mount designed for wall mount
applications.
The
PM14
is manufactured from aluminum and die-cast for low cost
efficiency. The
PM14
will support up to 20 pounds (9.07 kg).
The mount can be used with our PT270/PT280 Series pan/tilts.
The
PM14
can also be adapted for pole mount applications when
used with the PA101 mount adapter.
1.50
(3.81)
2.75
(6.99)
1.25
(3.18)
Ø 0.281 (0.713),
3X
2.86
(7.26)
Ø 0.343
(0.87)
3.48
(8.84)
Ø2.81 (7.14), 3X EQ SP
ON 1.00 (2.54) BC
1/4-20 D&T THRU
9.72
(24.69)
10.71
(27.20)
0.95 (2.41)
Ø1.63 (4.14)
C215 / REVISED 1-06
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODEL
PM14 Light duty wall mount for PT270P, PT270-24P,
RELATED PRODUCTS
PA101 Pole mount adapter for PM14 mount.
and PT280-24P pan/tilts or light-weight
enclosures
Stainless steel straps supplied. Straps fit
3-inch (7.62 cm) to 8-inch (20.32 cm) diameter
pole.
MECHANICAL
Pan/Tilt Mounting
PT270/PT280 Three 1/4-20 x 1.25 cap screws (supplied)
Mounting Method Secure to solid surface with three 1/4-inch
diameter fasteners or use two fasteners (one
1/4-inch diameter and one 5/16-inch
diameter) for center mounting holes in
applications where wall studs are
encountered. (Fasteners not supplied)
GENERAL
Construction Die-cast aluminum
Finish Gray polyester powder coat
Suggested
Maximum Load 20 lb (9.07 kg)
Unit Weight
PM14 1 lb (0.45 kg)
PA101 0.88 lb (0.40 kg)
Shipping Weight
PM14 2 lb (0.90 kg)
PA101 2 lb (0.90 kg)
CERTIFICATIONS
• UL Listed
PA101 POLE ADAPTER MOUNT
2.86
(7.26)
1.00
(2.54)
Ø0.25 X 0.75 SLOT
5.00
(12.70)
4.00
(10.16)
(0.64 X 1.91), 4X
1/4-20 X 3/4 STUD, 3X
0.75
(1.91)
2X
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
1.30
(3.30)
0.875
(2.22)
2X
2.725
(6.92)
REF.
0.425
(1.08)
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2006, Pelco, Inc. All rights reserved.
Loading...