Pelco PA402-SW Specsheet
PRODUCT SPECIFICATION
PA402 Mount
POLE MOUNT, SPECTRA® AND LEGACY® ADAPTER
camera solutions
Product Features
• Low Cost
• Rugged Construction
• Supports up to 75 Pounds (34 kg)
• Pole Mount Adapter for Spectra® and Legacy® Wall Mounts
(IWM Series, IDM4018, and LWM41)
• Design Includes Mounting Studs for Quick, Simple Installation of
Wall Mount
The
PA402
is a pole mount adapter designed for use with Spectra
and Legacy® wall mounts. For Spectra, DF5, or DF8 Series pendant
domes, use the IWM Series and IDM4018 wall mount. For Legacy
positioning systems, use the LWM41 wall mount.
The LWM41, IWM Series, or IDM4018 wall mount is secured to the
PA402
by four 5/16-inch mounting studs; nuts and split lock
washers are supplied.
Constructed from aluminum, the
PA402
is capable of supporting up
to 75 pounds (34 kg) and features a cable feedthrough hole for easy
routing of video and power cables. A block-off plate is included for
non-feedthrough outdoor applications.
PA402 SHOWN WITH
REMOVABLE BLOCK-OFF PLATE
®
Ø3.00 (7.62)
THRU, 2X
12.77
(32.44)
4.50
(11.43)
6.50
(16.5)
The
PA402
is for use on poles having a 3-inch (7.62 cm) to 8-inch
(20.32 cm) diameter.
C274 / REVISED 1-06
2.46
(6.24)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
2.75
(6.98)
7.00
(17.78)
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODEL
PA402 Pole mount adapter for IWM Series,
RELATED PRODUCTS
IWM Series Wall mount with cable feedthrough for use
IDM4018 Wall mount with removable front end cap and
LWM41 Legacy® wall mount. For use with Legacy
EA4348 EWM adapter plate. Allows an EWM wall
MECHANICAL
Adapter Mounting Four 5/16-inch mounting studs (nuts and split
Mounting Method Slots for mounting straps; three stainless
IDM4018 and LWM41 wall mounts
®
with Spectra
, DF5, or DF8 Series pendant
style domes.
cable feedthrough for use with Spectra, DF5,
or DF8 Series pendant style domes.
integrated positioning systems.
mount to be installed on a PA402 for use with
an Esprit® Series integrated positioning
system.
lock washers supplied) for attaching LWM41,
IDM4018, EA4348, or IWM Series mount
steel straps supplied. Straps fit 3-inch
(7.62 cm) to 8-inch (20.32 cm) diameter pole.
GENERAL
Construction 5052H32 aluminum, 0.190-inch (4.8 mm) thick
Finish Gray polyester powder coat
Maximum Load 75 lb (34 kg)
Unit Weight 3.48 lb (1.58 kg)
Shipping Weight 5 lb (2.27 kg)
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Pelco, the Pelco logo, Esprit, Legacy, and Spectra are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2006, Pelco, Inc. All rights reserved.
Loading...