This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this
equipment under Federal Communications Commission’s rules.
In order to maintain compliance with FCC regulations shielded cables must be used with this equipment. Operation with non-approved
equipment or unshielded cables is likely to result in interference to radio and television reception.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Video Quality Caution
FRAME RATE NOTICE REGARDING USER-SELECTED OPTIONS
Pelco systems are capable of providing high quality video for both live viewing and playback. However, the systems can be used in lower quality
modes, which can degrade picture quality, to allow for a slower rate of data transfer and to reduce the amount of video data stored. The picture
quality can be degraded by either lowering the resolution, reducing the picture rate, or both. A picture degraded by having a reduced resolution
may result in an image that is less clear or even indiscernible. A picture degraded by reducing the picture rate has fewer frames per second,
which can result in images that appear to jump or move more quickly than normal during playback. Lower frame rates may result in a key event
not being recorded by the system.
Judgment as to the suitability of the products for users’ purposes is solely the users’ responsibility. Users shall determine the suitability of the
products for their own intended application, picture rate and picture quality. In the event users intend to use the video for evidentiary purposes in
a judicial proceeding or otherwise, users should consult with their attorney regarding any particular requirements for such use.
C1621M-E (9/08)5
Description
The NVR5100 Series network video recorder (NVR) represents a new generation of flexibility and integration for network-based video system
recording. It is one of the recording components of Endura®, Pelco’s most advanced integrated video security system. The NVR represents the
state of the art in scalability, performance, expandability, and reliability. It is ideally suited for mission-critical, enterprise surveillance
applications.
The NVR5100 Series recorder is capable of continuous, scheduled, alarm/event, and motion recording. Pre- and post-alarm recording is also
available. All recording is fully programmable on a per-channel basis.
The unit includes EnduraStor
retention. While time-lapse recording records everything at a low frame rate, EnduraStor records in real-time for a user-defined delay period.
During the delay period, all real-time, high frame rate video is available for search, playback, and export. After the delay period, EnduraStor
reduces video from a high frame rate to a lower frame rate. EnduraStor does not reduce alarm and event video.
Designed with reliability in mind, the NVR5100 Series provides performance enhancement and fault tolerance by employing RAID 5 disk
management across as many as 12 hard drives. The NVR incorporates two RAID 5 controllers, each managing six hard drives.
NOTE: The NVR5100 Series recorder supports hot-swappable hard drives in case of failure; it does not support hot hard drive expansion.
Dual redundant, hot-swappable power supplies add another layer of reliability to the unit. Support for matrix-enabled failover rounds out the
reliability aspects of the NVR5100. Diagnostics are systemized with other Endura products so that problems are reported to various network
infrastructure-monitoring systems.
The NVR5100 Series recorder is the network-based video recording system of the future. It integrates seamlessly with Pelco’s integrated security
products to create a robust, secure, and expandable security platform. When combined with Pelco’s Endura workstation and stand-alone user
interfaces, the NVR5100 Series becomes a powerful search, retrieval, and archival audio/video system. EnduraStor makes real-time video
available when users need it most while keeping storage costs under control.
™
to maximize storage efficiency. EnduraStor improves upon traditional time-lapse recording to achieve longer video
FEATURES
•Supports up to 48 cameras at 30 frames per second (fps), 4CIF resolution (NVR5148)
•Supplies up to 32 simultaneous playback streams and up to 10 simultaneous queries
•Output viewable on up to 32 individual workstations
•Records video, audio, and data streams for every channel
•EnduraStor storage management system
•Hot-swappable hard drives and power supplies
•Fault tolerance and performance enhanced through use of RAID 5
•Redundant power supplies
•Storage locking
•Fully compatible with Pelco’s integrated system architecture
•System diagnostics and error logging
•Full over-the-network remote control and administration
6C1621M-E (9/08)
MODELS
ModelsStreams*Drives
NVR5124-1500246
NVR5124-3000246
NVR5124-600024126.0 TB4.65 TB
NVR5124-900024129.0 TB6.98 TB
NVR5148-1500486
NVR5148-3000486
NVR5148-600048126.0 TB4.65 TB
NVR5148-900048129.0 TB6.98 TB
*Simultaneous full frame rate/full resolution input streams.
†
All six-drive models include six empty hard drive carriers.
OPTIONAL ACCESSORIES
SEB5100 SeriesEach SEB5100 Series storage expansion box adds 1.5 TB to 9.0 TB of external storage, including 1.16 TB to 6.98 TB of
video storage, to any NVR5100 network video recorder. Up to eight units can be connected to an NVR5100 for a maximum
of 62.8 TB of available video storage.
ModelsStreams*Drives
SEB5100-1500Up to 486
SEB5100-3000Up to 486
SEB5100-6000Up to 48126.0 TB4.65 TB
Internal
Storage
†
†
†
†
1.5 TB1.16 TB
3.0 TB2.32 TB
1.5 TB1.16 TB
3.0 TB2.32 TB
Internal
Storage
†
1.5 TB1.16 TB
†
3.0 TB2.32 TB
Video
Storage
Video
Storage
SEB5100-9000Up to 48129.0 TB6.98 TB
*Simultaneous full frame rate/full resolution input streams; actual number
of streams matches NVR5100 model.
†
All six-drive models include six empty hard drive carriers.
When connected to an NVR5100, all SEB5100 models fully support
diagnostics and monitoring.
NVR5000PSReplacement power supply for NVR5100, SEB5100, and DVR5300 Series units
HD5000-250Replacement 250 GB hard drive and carrier for NVR5100, SEB5100, and DVR5300 Series units
HD5000-500Replacement 500 GB hard drive and carrier for NVR5100, SEB5100, and DVR5300 Series units
HD5000-750Replacement 750 GB hard drive and carrier for NVR5100, SEB5100, and DVR5300 Series units
HDD1500UPVideo storage upgrade kit; includes six 250 GB hard drives and carriers; adds 1.5 TB to NVR5100, SEB5100, and DVR5300 Series
units
HDD3000UPVideo storage upgrade kit; includes six 500 GB hard drives and carriers; adds 3.0 TB to NVR5100, SEB5100, and DVR5300 Series
units
C1621M-E (9/08)7
Before You Begin
Endura is a network system that requires a continuous amount of bandwidth to transmit true, live video. Therefore, always include your network
administrator when planning and installing Endura components.
You will also need the following items:
•Pelco-approved Endura certification
•Access to an Endura network
–that is an active, Gigabit Ethernet network that supports the full Internet Protocol suite,
–that is configured with at least one Endura system manager, and
–that is configured with at least one Endura workstation.
NOTES:
•Endura components are designed to deliver high-quality, high-frame rate video across a network. For best results, make sure your
installation meets the power, environmental, and networking guidelines described in the Endura Installation Guidelines and Best Practices
document (C2670M).
•When using one or more network switches on the Endura network, enable autonegotiation on all switches.
•These network requirements represent the minimum standard for a small Endura-capable security network. Please consult the Endura
Network Design Guide (C1640M) to make sure your network is properly configured. Your system may be different and may require
additional hardware, software, and network resources.
PARTS LIST
QtyDescription
1NVR5100 Series network video recorder
1Hard drive pack:
Six-drive (1.5 TB/3.0 TB) models:
6 Filled hard drive carriers, numbered Drive 1 through Drive 6
6 Empty hard drive carriers, numbered Drive 7 through Drive 12
Twelve-drive (6.0 TB/9.0 TB) models:
12 Filled hard drive carriers, numbered Drive 1 through Drive 12
1Accessory pack:
5Rubber feet with 8-32 x 0.375-inch, Phillips pan head screws (for desktop mounting, installed)
6Power cords (2 USA standard, 2 European standard, and 2 UK standard)
2Front bezel keys
1Disposable wrist strap for electrostatic discharge (ESD) protection
1Rack mount kit (included with accessory pack):
2Chassis mounting brackets with handles and thumbscrews (installed)
12Screws, 10-32 x 0.25-inch, Phillips pan head (six for each bracket, installed)
2Adjustable support rail sets (each set includes one front-mounting rail and one rear-mounting rail)
8Screws, 8-32 x 0.375-inch, Phillips truss head (four for each support rail)
8Screws, 10-32 x 0.5-inch, Phillips flat head (two for each front rail, two for each rack rail spacer)
4Screws, 10-32 x 0.75-inch, Phillips pan head (two for each rear rail)
2Rack rail spacers
14Cage nuts, 10-32
3Product serial number labels (attached to unit)
1NVR5100 Series Installation manual
1Safety instructions
3Hard drive inserts
8C1621M-E (9/08)
USER-SUPPLIED PARTS
In addition to the standard tools and cables required for a video security installation, you will need to provide the following items:
QtyDescription
1Cat5e (or better) cable and connectors for connecting the NVR5100 to the Endura network
1Power source (110/220 VAC)
1Small flat-tip screwdriver, if mounting the unit into a rack
1Small Phillips screwdriver, if mounting the unit into a rack
You also need to provide all network equipment, such as switches, for the Endura network.
C1621M-E (9/08)9
PACKAGE CONTENTS
The following diagrams show the contents of the three boxes. When installing the NVR5100, refer to these diagrams.
SHIPPING BOX
NVR5100
ACCESSORY PACKHARD DRIVE PACK
Figure 1. Major Package Components
HARD DRIVE PACK
- OR -
DRIVE 1 - DRIVE 12
(12-DRIVE MODELS)
SAFETY INSTRUCTIONS
INSTALLATION MANUAL
HARD DRIVE INSERT
HARD DRIVE INSERTS
DRIVE 1 - DRIVE 6
DRIVE CARRIER 7 - DRIVE CARRIER 12
(6-DRIVE MODELS)
Figure 2. Hard Drive Pack
10C1621M-E (9/08)
ACCESSORY PACK
SHOWN ACTUAL SIZE
PHILLIPS PAN
HEAD SCREW,
8-32 X 0.375-INCH
5 EA.
(INSTALLED)
RUBBER FEET
5 EA.
(INSTALLED)
USA STANDARD
POWER CORD
(110 VAC)
2 EA.
FRONT BEZEL KEY
2 EA.
DISPOSABLE
WRIST STRAP
Figure 3. Accessory Pack
REAR MOUNT RAIL
2 EA.
STANDARD POWER
1 EA.
EUROPEAN
CORD (220 VAC)
2 EA.
UK
STANDARD POWER
CORD (250 VAC)
2 EA.
RACK MOUNT KIT
FRONT MOUNT RAIL
RACK MOUNT KIT
2 EA.
CHASSIS MOUNTING
BRACKETS
SHOWN ACTUAL SIZE
PHILLIPS PAN
HEAD SCREW,
10-32 X 0.25- INCH
12 EA.
(INSTALLED)
PHILLIPS TRUSS
HEAD SCREW,
8-32 X 0.375-INCH
8 EA.
PHILLIPS FLAT
HEAD SCREW,
10-32 X 0.5-INCH
8 EA.
PHILLIPS PAN
HEAD SCREW,
10-32 X 0.75-INCH
4 EA.
CAGE NUT,
10-32
14 EA.
Figure 4. Rack Mount Kit
C1621M-E (9/08)11
RACK RAIL
SPACER
2 EA.
INTEGRATION AND APPLICATION SCENARIO
This section illustrates a potential application scenario featuring the NVR5100 Series NVR.
Figure 5 shows a subnetted, enterprise-wide security system that integrates devices at different geographical locations.
GIGABIT SWITCH
SM5000WS5050VCD5000
KBD5000
1
8
VLAN1
UP TO 48
NVR5100
SEB5100
GIGABIT SWITCH
ENCODERS
GIGABIT SWITCH
VLAN2
UP TO 48
NVR5100
SEB5100
GIGABIT SWITCH
ENCODERS
VLAN3
GIGABIT SWITCH
UP TO 48
ENCODERS
NVR5100
SEB5100
SEB5100
Figure 5. Enterprise-Wide Security Network
IMPORTANT NOTE. PLEASE READ. The network implementations in this document are shown as general representations only and are not
intended to show detailed network topologies. Your actual network will differ, requiring changes or perhaps additional network equipment to
accommodate the systems as illustrated. Please contact your local Pelco Representative to discuss your specific requirements.
12C1621M-E (9/08)
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.