Pelco LWM41 Specsheet
PRODUCT SPECIFICATION
LWM41 Mount
WALL MOUNT, LEGACY® SERIES, PAN/TILT
camera solutions
Product Features
• Easy to Install
• Lightweight, Cast-Aluminum Construction
• Supports up to 150 Pounds (68 kg)
• For Use with Legacy® Integrated Positioning Systems
• Can Be Used with Optional Legacy LRD41 Series Receiver
• Optional Access Panel Lock Kit
• Optional Corner, Parapet, and Pole Adapters Available
The
LWM41
is a wall mount designed for use with all Legacy
integrated positioning systems.
Constructed from cast aluminum, the
LWM41
is capable of supporting
up to 150 pounds (68 kg). This timesaving and easy-to-install mount
houses the entire Legacy system (pan/tilt, enclosure, and receiver) in
one location. Video and power cables can be routed through the rear
or bottom of the mount. A optional block-off plate is supplied for
NEMA Type 4 and conduit applications. The bottom access panel is
easily accessible for installation and maintenance of the optional
receiver, and an access panel lock kit (LK4500) is available for
additional security.
LWM41 MOUNT SHOWN WITH
INTEGRAL LEGACY RECEIVER
(ACCESS DOOR OPEN)
LWM41 MOUNT
®
18.75 (47.6)
21.87 (55.5)
7.42
(18.8)
6.50
(16.5)
4.50
(11.4)
Optional Coaxitron
®
receiver (LRD41A11 or LRD41C21/LRD41C22
Series) is available in fixed or variable speed models, with or without
presets. Also available is an optional LRD41TLC test/local control
module for testing system and lens functions. This plug-in module
operates on +5 VDC supplied by the receiver.
The
LWM41
can be adapted for use in corner, pole, and parapet
applications when used with the appropriate mount adapter.
C283 / REVISED 10-00
NOTE: SHOWN WITH ACCESS PANEL
OPEN WITH RX BOX ATTACHED.
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
2.10
(5.3)
14.30
(36.3)
1.49 (3.8)
2.40
6.83
(6.1)
(17.3)
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODEL
®
LWM41 Wall mount for Legacy
positioning system and optional receiver
integrated
RELATED PRODUCTS
®
Integrated
Legacy
Positioning Systems Medium-duty system (EH4700L and EH5700L
LRD41A11 Series Legacy fixed speed receiver, Coaxitron®
LRD41C21 Series Legacy fixed speed receiver, Coaxitron/
LRD41C22 Series Legacy variable speed receiver, Coaxitron/
LRD41TLC Test/local control module for use with
Series enclosure and PT780 Series pan/tilt).
Medium-duty system (EH8106L pressurized
enclosure and PT780 Series pan/tilt).
compatible.
RS-422 compatible with up to 64 presets.
RS-422 compatible with up to 64 presets.
optional receiver.
MECHANICAL
Pan/Tilt Mounting Four 1/4-20 x 5/8-inch cap screws and
Mounting Method Secure with four fasteners suitable for
washers (supplied) for attaching pan/tilt
mounting surface (minimum 5/16-inch
recommended, not supplied)
GENERAL
Construction Aluminum casting
Finish Gray polyester powder coat
Maximum Load 150 lb (68 kg)
Unit Weight 9.51 lb (4.32 kg)
14 lb (6.35 kg) approximate with receiver
installed
Shipping Weight 12 lb (5.44 kg)
CERTIFICATIONS/RATINGS
• Meets NEMA Type 4 standards (with all factory-supplied gaskets and
block-off plates installed)
OPTIONAL ACCESSORIES
LK4500 Lock kit (with keys) for LWM41 wall mount
access panel
OPTIONAL MOUNT ADAPTERS
CM400 Corner mount adapter.
PA402 Pole mount adapter. Minimum pole diameter
3 inches.
PP300L Parapet corner mount adapter. Mounts on top
of rooftop or parapet.
PP301L Parapet corner mount adapter. Mounts to
inside of parapet.
PP400 Parapet mount adapter. Mounts to inside/
outside of parapet wall.
PP4348 Parapet mount. Mounts to rooftop or
horizontal flat surface.
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada
International
www.pelco.com
Tel: (800) 289-9100 • FAX: (800) 289-9150
Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
Pelco, the Pelco logo, Coaxitron, and Legacy are registered trademarks of Pelco, Inc.
Specifications subject to change without notice.
©Copyright 2000, Pelco, Inc. All rights reserved.
Loading...