Pelco IXE23, IXE33, IXE53, IXE83, IME238-1ERS specification sheets

PRODUCT SPECIFICATION

Sarix® IXE Series Box IP Cameras

UP TO 4K, WDR AND LOW-LIGHT PERFORMANCE, H.264, H.265

Product Features

• SureVision Technology (Advanced Low-Light & WDR Performance

Simultaneously, Anti-Bloom Technology, 3D Noise Filtering, and
Enhanced Tone Mapping)

• Up to 8 Megapixel (MP) Resolution (4K)

• Up to 120 Frames per Second (fps) at 1080p on select models

• Up to 130 dB Wide Dynamic Range (2 MP and 3 MP Mod

Up to 120 dB Wide Dynamic Range (5 MP and 4K Models)

• Robust Electronic Image Stabilization

• Built-in Pelco Enhanced Analytics Suite & Capable of Advanced Deep

Learning Analytics Available Separately

• H.265, H.264, and MJPEG Encoding with Pelco Smart Compression

• Supports i-CS Megapixel Lenses (Sold Separately As Accessories)

• Power over Ethernet (PoE), 24 VAC, 12 VDC

• Power Redundancy Between PoE

and 12 VDC / 24 VAC

els),

• Support for Local Storage with Micro SD Slot for SDHC/SDXC Card

• Compatible with Pelco and Third-Party Video Systems

• ONVIF Profile S, Profile G, Profile M, and Profile T Conformant

• Full 3-Year Warranty and Support

camera solutions

Sarix Enhanced Range with SureVision

Sarix® Enhanced ( E) range cameras feature SureVision technology,

delivering up to 8 MP high definition (HD) resolution (2 MP, 3 MP, 5 MP, and 8
MP options are available) consistent color science, fast processing power,
and simultaneous advanced low-light performance with wide dynamic range
(WDR) and anti-bloom technologies. New advancements include 3D noise
filtering, smooth re sponse to illumination changes, and improved tone
mapping to retain color accuracy and overall image contrast.

With Electronic Image Stabilization enabled by b
Enh anced cameras always provi de shar p, stable images even d uring
vibration/wind environment.

Power redundancy between PoE and 12 VDC/24 VAC ensures 24-hour, 365­day continuous operation even under unstable power supply situations.

uilt-in Gyro technology, Sarix

The IXE Series Box Camera

Within the Sarix Enhanced Range, the IXE Seri es Box Ca mer as ar e
compatible with a choice of standard iCS (Intelligent CS-mount) Megapixel
Lenses for wide angle or long range surveillance needs. Equipped with
motors, iCS lenses enable auto and remote control zoom, focus, and iris for
IXE Series Box Cameras. This not only allows for quick and easy installation,
but also optimization of the image quality. A System Watchdog feature
automatically restarts the camera if a malfunction is detected.

Video

The IXE Series supports three independently-configurable video streams. The
three streams can be compressed with efficient H.265, H.264 High or Main
profiles, or MJPEG formats. The streams can be configured to a variety of
frame rates, variable bit rates, and group of pictures (GOP) structures to
optimize image quality with bandwidth and storage efficiency. In addition,
streams can be encoded as constrained variable bit rate
bit rate (CBR). Pelco Smart Compression is available on both H.264 and H.265,
optimizing between bandwidth and image quality and can reduce storage by
up to 70% depending on the scene.

(CVBR) or constant

Open and Integrated

Sarix Enhanced range c amera s seamlessly co nnect to Pelco video

management systems such as VideoXpert
(or la ter), and Digital Sentry® version 7.3 (or later). Sarix Enhanced range
cameras integrate with major third-party video management systems through
the Pelco API, and other third-party software and systems through the ONVIF
Profile S, G, M, and T standards.

™

, VxToolbox, Endura® version 2.0

C5000S / Revised 7-12-22

TECHNICAL SPECIFICATIONS

POWER REDUNDANCY

Sarix Enhanced range cameras are designed with Power over

Ethernet (PoE), 24 VAC and 12 VDC to reduce costs and simplify
planning, wiring, and installation. PoE functionality works with PoE­enabled network switches or power injectors, eliminating the need
for separate power supplies and cabling, and increasing camera fail
safety through an uninterruptable power

supply (UPS).

The cameras also support power supply failover between PoE and 12
VDC/24 VAC. If the camera is running with both PoE power and 12
VDC/24 VAC power supplied, and then PoE power is lost, the camera
will switch to 12 VDC/24 VAC without any interruption or video loss.
Once PoE power is restored, the camera will reboot and then run
using PoE power.

PELCO ENHANCED ANALYTICS SUITE

Sarix Enhanced range cameras includes two Basic and seven

Enhanced user-configurable behaviors to enhance the flexibility and
performance of the camera. The camera is capable of running up to
two Enhanced behaviors in addition to the two Basic behaviors at the
same time.

For each behavior, you can set up different scenarios for the behavior,
which will automatically detect and trigger alarms when specific
activity is de

Analytics are configured and enabled using a standard Web browser,
and behavior alarms are compatible with VideoXpert or a third-party

system that supports Pelco’s API.

Available behaviors include:

• Camera Sabotage: Detects contrast changes in the field of view. An

alarm is triggered if the lens is obstructed by spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.

• Region-B

camera determines if sufficient motion is detected within a configurable
region.

tected.

ased Simple Motion Detection: Based on sensitivity, the

Available Enhanced analytic behaviors include:

• Abandoned Object: Detects objects placed within a defined zone and

triggers an alarm if the object remains in the zone unattended. An airport
terminal is a typical installation for this behavior. This behavior can als
detect objects left behind at an ATM, signaling possible card skimming.

• Intrusion Detection: Detects and tracks objects that enter a scene and

then triggers an alarm when the objects enter a user-defined zone. This
behavior is primarily used in outdoor environments with light traffic to
reduce the number of false alarms caused by environmental changes.

• Camera Sabotage: Detects contrast changes i

alarm is triggered if the lens is obstructed by spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.

• Wrong Direction: Generates an alarm in a high traffic area when a

person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect

moving in the opposite direction of the normal flow of traffic or an

objects
individual entering through an exit door.

• Loitering Detection: Identifies when people or vehicles remain in a

defined zone too long. This behavior is effective in real-time notification
of suspicious behavior around ATMs, stairwells, and school grounds.

• Object Counting: Counts the number of objects that cross a defined

• Object Removal: Triggers an alarm if an object is removed from a

• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer

behavior can be used to count the number of people at a store

line. This
entrance/exit or inside a store where the traffic is light. This behavior is
based on tracking and does not count people in a crowded setting.

user-defined zone. This behavior is ideal for customers who want to
detect the removal of high value objects, such as a painting
a statue from a pedestal.

than the user-defined time allows. This behavior is ideal for airport
curbside drop-offs, parking enforcement, suspicious parking, traffic lane
breakdowns, and vehicles waiting at gates.

n the field of view. An

from a wall or

PELCO’S SMART COMPRESSION TECHNOLOGY

Pelco’s Smart Compression Technology lowers bandwidth and storage

requirements by up to 70%. Our technology allows the user to make
intelligent decisions regarding storage savings and image quality.

Pelco’s Smart Compression Technology dynamically analyzes motion

occurring within live video in real-time, to intelligently compress the

information you don’t need, while retaining details with clear quality in the

areas that are important in the scene. By enabling Dynamic GOP, an added
feature of Smart Compression, the number of I-frames are automatically
reduced in scenes with low motion. Based on the complexity of scenes and
motion occurring, such as a store room tha
70% bandwidth savings can be achieved.

t has limited entry and exit, up to

o

TECHNICAL SPECIFICATIONS

COMPONENT FEATURES

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

Environmental/Vandal­Resistant

• Black, RAL 9011

• Aluminum Construction

• Recommended Lenses (MI2.8-

8.5P, MI3.9-10P, MI9-50P)

• Recommended Mounts (C11­UM, CM1751, TB1751)

• Recommended Enclosures
(EH20 Series*, EHS8000
Series*)

• Built-in Microphone

*Not all lens/camera

combinations supported.

CAMERA

Imaging Device 1/2.8 (2 MP or 3 MP sensors) or 1/1.8 (5 MP

Imager Type CMOS
Imager Readout Progressive scan
Highest Resolution

8 MP (4K) 3840 x 2160
5 MP 2592 x 1944
3 MP 2048 x 1536

2 MP 1920 x 1080
Signal-to-Noise Ratio >50 dB
Electronic Shutter Range

Minimum Illumination

or 8 MP/4K sensors)

1/10,000 sec (or faster) to 1sec

Resolution Lens Sensitivity

2 MP 2.8-8.5 f/1.2 0.0125 lux 0.0011 lux 0.005 lux 0.00045 lux

2 MP 3.9-10 f/1.5 0.025 lux 0.0023 lux 0.013 lux 0.00118 lux

2 MP 9-50 f/1.5 0.025 lux 0.0023 lux 0.013 lux 0.00118 lux

3 MP 2.8-8.5 f/1.2 0.05 lux 0.0045 lux 0.01 lux 0.00091 lux

3 MP 3.9-10 f/1.5 0.085 lux 0.0077 lux 0.043 lux 0.00391 lux

3 MP 9-50 f/1.5 0.085 lux 0.007 lux 0.043 lux 0.00391 lux

P & 8 MP (4K) 3.9-10 f/1.5 0.095 lux 0.0086 lux 0.06 lux 0.00545 lux

5 M

5 MP & 8 MP (4K) 9-50 f/1.5 0.095 lux 0.0086 lux 0.06 0.00545 lux

Wide Dynamic Range Up to 130 dB (2 MP and 3 MP Models),

20 dB (5 MP and 8 MP/4K Models),

Up to 1
Per IEC 62676

White Balance Range: 2,500° to 10,000°K; Selectable Auto/

Day/Night Capabilities Mechanical IR cut filter (ON/OFF/AUTO), with

3D Noise Reduction Yes (ON / OFF selectable)

Color Mono

33 ms 500 ms 33 ms 500 ms

Manual

different set points on lux

TECHNICAL SPECIFICATIONS

LENSING

Lens Mount CS thread, 1-32UN-2A
Auto Iris Type Supports P-Iris
Field of View in Degrees*
*Note: Field of view may vary with changes in resolution settings.

Lens

2.8 - 8 mm

3.9 - 10 mm

9 - 50 mm

*This lens is not supported with these MP cameras.

Angle of

View

Horizontal 121° ~ 40° 109° ~ 36° * *

Vertical 62° ~ 22° 79° ~ 27° * *

Horizontal 84° ~ 33° 76° ~ 31° 119° ~ 45° 119° ~ 45°

Vertical 45° ~ 19° 55° ~ 23° 62° ~ 26° 62° ~ 26°

Horizontal 34° ~ 6.6° 31° ~ 6.1° 46° ~ 9.0° 46° ~ 9.0°

Vertical 19.1° ~ 3.8° 23° ~ 4.6° 26° ~ 5.2° 26° ~ 5.2°

2 MP 3 MP 5 MP

AUDIO

Streaming Bidirectional: full or half duplex
Built-in Microphone 60 SPL @ 25 ft >40 dB SNR
Input Line level, 3K ohm differential with/1Vp-p

Output Line leve
Encoding G.711-Alaw/G711-Ulaw

maximum signal

l, 600 ohm differential with/1Vp-p

GENERAL

Construction Aluminum
Finish Black, RAL 9011
Weight 0.48 kg (1.06 lb) (Unit),

0.63 kg (1.34 lb) (Shipping)

8 MP

ENVIRONMENTAL

Operating Temperature –10° to 55°C (14° to 131°F)
Start-up Temperature –10°C (14°F)
Storage Temperature –40° to 60°C (–40° to 140°F)
Operating Humidity 10 to 90%, RH noncondensing
Storage Humidity 20 to 80%, RH noncondensing
Shock and Vibration
Resistance Tested in accordance to IEC/EN 60068:

and 2-27

2-6

TECHNICAL SPECIFICATIONS

ELECTRICAL

Network Port RJ-45 connector for 100Base-TX*/

1000Base-T, Automatic MDI/MDI-X

*Some combinations of high resolution, frame rate, and high numbers of
unicast streams, may lead to less desirable results at 100Base-TX.

Input Power PoE (

Power Consumption 7.6 W typical, 12.95 W maximum
Local Storage Micro SD, SDHC, SDXC com

Alarm Detects open or closed alarm state

Input Quantity 1, Normally Open, Normally Closed,

Output Quantity 1, ±32 VDC maximum, 150 mA

IEEE 802.3af, Class 3), 24 VAC (18 ~ 32

VAC), 12 VDC ±10%

patible;

Up to 2 TB addressable (256 GB testable)

Supervised,

3.5 VDC maximum, 35 mA maximum

maximum

NETWORK

Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),

Users

Unicast Two guaranteed (up to 20 depending on the

Multicast Unlimited
Security Access Password protected, HTTP, IEEE 802.1X,

Software Interface Web browser view and setup

UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6,
SNMP v2c/v3, QoS, HTTP, HTTPS, SSL, SMTP,
FTP, 802.1x (EAP), and NTCIP 1205, IGMP,
TLS/TTLS, ARP

resolution settings)

digest authentication, IP filtering

, ICMP

MINIMUM SYSTEM REQUIREMENTS

Processor Intel® Core™ i3 processor, 2.4 GHz
Operating System Microsoft

Memory 4 GB RAM
Network Interface 1 gigabit (or greater)
Monitor Minimum of 1024 x 768 resolution,

Web Browser Internet Explorer

®

DirectX®11, Windows XP Service Pack 3 with
DirectX 9.0c; or Mac

16- or 32-bit pixel color resolution

Chrome™ (51 or later) or Mozilla® Firefox® 3.5
(or later); Internet Explorer 8.0 (or later) is
recommended for configuring analytics

Windows® 7 (32- and 64-bit), or

®

OS X 10.4 (or later)

®

10 (or later), Google

INTEGRATION

Pelco System Integration VideoXpert;

Endura 2.0 (or later);
Digital Sentry 7.3 (or later)

Open API Pelco API or ONVIF Profile S, Profile G, Profile

Mobile Application Pelco Mobile Application
Camera Discovery VxToolbox
Firmware Upgrade Web UI or VxToolbox
Multilingual User Interface English, French, Italian, German, Spanish,

M, and Profile T

Korean, Portuguese, Russian, Simplified
Chinese, Turkish

VIDEO

Video Streams Up to three simultaneous streams, the second

Available Resolutions 8 MP/4K 3840 x 2160 to 512 x 384;

Maximum Frame Rate Up to 120 fps at 1080p on the 3MP models,

ncoding H.265, H.264 Main/High, MJPEG

Video E
Bit Rate Control Constrained variable bit rate (CVBR) and

Orientation Modes Electronic image rotation 90, 180, and 270

Video Snapshot JPEG capture at the same resolution as the

Window Blanking 16 configurable Windows
Electronic Image
Stabilization Yes (ON / OFF selectable)
Video Overlay Camera name, t

Flicker Correction Selectable Auto On/Off, 50 Hz or 60 Hz modes

stream and third stream are variable based on
the setup of the primary stream

5 MP 2592 x 1944 to 512 x 384;
3 MP 2048 x 1536 to 640 x 360;
2 MP 1920 x 1080 to 512 x 384

Up to 60 fps at 1080p on all models,
Up to 30 fps at full resolution with WDR on all

models

constant bit rate (CBR)

degrees (Corridor Mode)

highest stream configured

ime, date, and customizable
text with multiple supported languages.
Embedding of custom images and logos
supported.

TECHNICAL SPECIFICATIONS

MODELS

Resolution Model Number Description

2 MP IXE23 Sarix Enhanced Box IP Camera

3 MP IXE33 Sarix Enhanced Box IP Camera

5 MP IXE53 Sarix Enhanced Box IP Camera

8 MP (4K) IXE83 Sarix Enhanced Box IP Camera

RECOMMENDED MOUNTS

C11-UM Gang box mount
CM1750 Pedestal mount
TB1751 T-rail mount

RECOMMENDED LENSES

MI2.8-8.5P* MP iCS lens 2.8-8.5 mm
MI3.9-10P MP iCS lens 3.9-10 mm
MI9-50P MP iCS lens
*Compatible with IXE23 and IXE33 only.

9-50 mm

RECOMMENDED ENCLOSURES

EH20 Series Compact, indoor/environmental, IP-enabled

EHS8000 Series Rugged, outdoor, stainless steel enclosures

enclosures

POWER SUPPLIES

WCS Series Outdoor, 24 VAC power supply
POE130-XT Single-port PoE Gigabit extender powered by

POE130-AT (US or EU) Single-port PoE+ midspan with power cord
POE430-AT (US or EU) 4-port, 30

POE1236-AT (US or EU) 12-port, 36W PoE midspan
POE2436-AT (US or EU) 24-port, 36W PoE midspan

POE190-BT injector

W per port PoE midspan with power

cord

CERTIFICATIONS/RATINGS

• CE (Class A)

• FCC (Class A)

• ICES-003 (Class A)

• UL/cUL Listed

• UL/IEC/EN 60950-1, 62368-1

• KC*

• NOM

• RCM

• EAC*

• BIS

• ONVIF Profile S, Profile G, Profile M, and Profile T Conformant

*At the time of this publication, certifications are pending. Consult the

ory or www.pelco.com for the current status of certifications.

fact

Pelco, Inc.

625 W. Alluvial, Fresno, California 93711 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All other product names and

Product specifications and availability are subject to change without notice.

services are the property of their respective companies.

©Copyright 2022, Pelco, Inc. All rights reserv

ed.