Pelco IXE20DN-OSP, IXE20DN-OS, IXE20DN-OCP Specsheet

PRODUCT SPECIFICATION

(LENS NOT SUPPLIED WITH CAMERA)

camera solutions

IXE20 Series Sarix® IP Camera

2.1 MEGAPIXEL EXTENDED PLATFORM HIGH DEFINITION DIGITAL CAMERAS

Product Features

• Open IP Standards

• Up to 2.1 Megapixel Resolution (1920 x 1080)

• Up to 30 Images per Second (ips) at 1920 x 1080

• Auto Back Focus

• H.264 and MJPEG Compression Capability

• Day/Night Models

• Video Setup Jack

• Sensitivity Down to 0.03 Lux

• Power over Ethernet (IEEE 802.3af) or 24 VAC

• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks

• Built-in Analytics

• Local Storage (Micro SD) for Alarm Capture

The Sarix® IXE20 Series extended platform (EP) is a

2.1 megapixel (Mpx) high performance day/night camera with
advanced low-light technology and a mechanical IR cut filter for
increased sensitivity in low-light installations.

Designed to install quickly, the camera includes automatic back
focus control, built-in analytics, and other advanced features needed
for demanding security applications.

Sarix technology defines the next generation of video security
imaging performance, delivering high definition (HD) resolution,
advanced low-light capabilities, consistent color science, and fast
processing power. The H.264 compression video files are
considerably smaller, making HD video more affordable.

Camera

The IXE20 Series has two 2.1 MPx models: color and day/night.
Both models feature advanced low-light technology capabilities. The
day/night model has a mechanical IR cut filter for increased
sensitivity in low-light installations.

The IXE20 Series can support two simultaneous video streams. The
two streams can be compressed in MJPEG and H.264 formats across
several resolution configurations. The extended platform gives
real-time video (30 ips) with HD resolution using H.264 compression
for optimized bandwidth and storage efficiency. The streams can be
configured to a variety of frame rates, bit rates, and GOP (group of
pictures) structures for additional bandwidth administration.

• Adaptive Motion Detection

• ONVIF v1.02 Conformant

• Audio Accessory Available

Built-in Analytics

Pelco Analytics enhance the flexibility and performance of the

IXE20 Series camera. Eight Pelco behaviors are preloaded and
included as a standard feature of the IXE20DN. Pelco behaviors can
be configured and enabled using a standard Web browser, and they
are compatible with Endura
alarms using Pelco’s API. Camera models are also available with
preloaded OV Analytic Suites.

®

or a third-party system that supports

Web Interface

The IXE20 Series uses a standard Web browser for powerful
remote setup and administration.

Window Blanking

Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. The IXE20 Series supports up to
four blanked windows. A blanked area will appear on the screen as
a solid gray window.

Video Systemization

The IXE20 Series easily connects to Pelco IP and hybrid systems
such as Endura version 2.0 (or later) and Digital Sentry
(or later). The camera is also compatible with Digital Sentry NVs
(DS NVs), a full-featured video management software, which is
available as a free download at www.pelco.com. DS NVs includes
four free Pelco IP licenses and allows for the management of video
from up to 64 cameras.

The IXE20 Series features open architecture connectivity to
third-party software. Pelco offers an application programming
interface (API) and software developer’s kit (SDK) for interfacing with
Pelco’s IP cameras.

®

version 7.3

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C2955 / REVISED 8-28-13

TECHNICAL SPECIFICATIONS

PELCO ANALYTICS

The IXE20 series includes eight user-configurable behaviors. The
camera is capable of running up to three behaviors at the same time;
although, the number of behaviors is limited to the available
processing power of the camera and the type of analytic being used.

Note: Available processing power is determined by the settings for
compression standards, resolution, image rate, bit rate, and analytic
configuration.

For each behavior, you can create several custom profiles that
contain different camera settings. With these profiles, you can set up
different scenarios for the behavior, which will automatically detect
and trigger alarms when specific activity is detected.

Pelco Analytics are configured and enabled using a standard Web
browser, and Pelco behavior alarms are compatible with Endura or a
third-party system that supports Pelco’s API system. Multiple Pelco
behaviors can be scheduled to work during a certain time or
condition. For example, during the day, a camera can be configured
with Object Counting to count the number of people that enter a lobby
door. At night, the operator can change the profile to Camera
Sabotage to trigger an alarm if a camera is moved or obstructed.
Available Pelco behaviors include:

• Abandoned Object: Detects objects placed in a defined zone and

triggers an alarm if the object remains in the zone longer than the
user-defined time allows. An airport terminal is a typical installation for
this behavior. This behavior can also detect objects left behind at an
ATM, signaling possible card skimming.

• Adaptive Motion Detection: Detects and tracks objects that enter a

scene and then triggers an alarm when the objects enter a user-defined
zone. This behavior is primarily used in outdoor environments with light
traffic to reduce the number of false alarms caused by environmental
changes.

• Camera Sabotage: Detects contrast changes in the field of view. An

alarm is triggered if the lens is obstructed with spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.

• Directional Motion: Generates an alarm in a high traffic area when a

person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.

• Loitering Detection: Identifies when people or vehicles remain in a

defined zone longer than the user-defined time allows. This behavior is
effective in real-time notification of suspicious behavior around ATMs,
stairwells, and school grounds.

• Object Counting: Counts the number of objects that enter a defined

zone or cross a tripwire. This behavior might be used to count the number
of people at a store entrance/exit or inside a store where the traffic is
light. This behavior is based on tracking and does not count people in a
crowded setting.

• Object Removal: Triggers an alarm if an object is removed from a

defined zone. This behavior is ideal for customers who want to detect the
removal of high value objects, such as a painting from a wall or a statue
from a pedestal.

• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer

than the user-defined time allows. This behavior is ideal for airport
curbside drop-offs, parking enforcement, suspicious parking, traffic lane
breakdowns, and vehicles waiting at gates.

OBJECTVIDEO (OV) ANALYTIC SUITES

ObjectVideo Analytics Suites are preloaded on selected IXE20 Series
cameras and require an OV Ready system to configure the behaviors
for alarm notification.

OV Security Suite

The OV Security Suite is easy to use and includes Tripwire Detection,
Inside Area Detection, and Camera Tamper Detection behaviors.

• Tripwire Detection identifies objects that cross a user-defined line drawn
within the camera’s field of view.

• Inside Area Detection identifies objects entering, appearing, or moving
within a user-defined area.

• Camera Tamper Detection identifies significant contrast changes in the
camera’s field of view; for example, if the lens is obstructed by spray
paint, a cloth, or a lens cap.

OV Security Suite Plus

The OV Security Suite Plus includes the behaviors of the OV Security
Suite plus Multi-Line Tripwire Detection, Loitering Detection, and
Leave Behind Detection behaviors.

• Multi-Line Tripwire Detection identifies objects that cross two defined
lines and generates an event based on defined parameters, including
directionality. Defined parameters for this behavior include direction,
sequential order, and time between crossing each tripwire.

• Loitering Detection identifies when people or vehicles remain within a
user-defined area beyond a specified period of time. This behavior is
effective for real-time notification of suspicious behavior around ATMs,
stairwells, and school grounds.

• Leave Behind Detection detects objects placed in a defined zone and
triggers an alarm if the object remains in the zone longer than the
user-defined time allows.

OV Event Counting Suite

The OV Event Counting Suite uses advanced object calibration and
additional features for schedu les, parameters, and multiple rules. The
suite includes behaviors for Tripwire Counting, Enters/Exits Counting,
Loiter Counting, Occupancy Sensing, and Dwell-Time Monitoring.

• Tripwire Counting counts people or objects that cross a user-defined line.

• Enters/Exits Counting calculates the number of people that enter and exit
an area without using a tripwire.

• Loiter Counting is useful in analyzing how frequently people stop in front
of a product, display, or other area of interest. This feature is also useful
in assessing promotion effectiveness and product interest.

• Occupancy Sensing counts people and generates a new value every time
the occupancy level changes. Since each occupancy output is
time-stamped, the data can be used to determine average occupancy
levels or to correlate data to point-of-sale or other business scenarios.

• Dwell-Time Monitoring rules can be set up to record the length of time it
takes an object to enter and exit an area. Along with queue size
information, wait times can also be assessed. This behavior can be used
to evaluate consumer interaction for a point-of-sale display or digital
advertisement.