Pelco IXE20C Specsheet

PRODUCT SPECIFICATION

camera solutions

IXE20 Series Sarix™ EP Network Camera

2.1 MEGAPIXEL EXTENDED PLATFORM HIGH DEFINITION DIGITAL CAMERAS

Product Features

• Open IP Standards

• Up to 2.1 Megapixel Resolution (1920 x 1080)

• Up to 30 Images per Second (ips) at 1920 x 1080

• Auto Back Focus

• H.264 and MJPEG Compression Capability

• Color and Day/Night Models

• Video Setup Jack

• Sensitivity Down to 0.03 Lux

• Power over Ethernet (IEEE 802.3af) or 24 VAC

• Up to 2 Simultaneous Video Streams

• Built-in Analytics

• Local Storage (Mini SD) for Alarm Capture

The

IXE20 Series extended platform (EP) camera with Sarix

technology

is a 2.1 megapixel (MPx) network camera designed with
industry-leading image quality and high performance processing
power. Designed to install quickly, the camera includes automatic
back focus control, built-in analytics, and other advanced features
needed for demanding security applications.

Sarix

technology defines the next generation of video security
imaging performance, delivering high definition (HD) resolution,
advanced low-light capabilities, consistent color science, and fast
processing power. The H.264 compression video files are up to
20 times smaller making high definition video more affordable.

(LENS NOT SUPPLIED WITH CAMERA)

• Motion Detection

• Audio Accessory Available

™

Built-in Analytics

®

Analytic Suites

Pelco

and

ObjectVideo® (OV) Analytic Suites

enhance the flexibility and performance of the IXE20 Series camera.
Pelco’s Camera Sabotage behavior is a standard feature of six
models, including the IXE20C, IXE20DN, and all models that are
preloaded with
also available preloaded with

Pelco Analytic Suites

when used with Endura
Analytics application programming interface (API).

Suites

easy to enable when using

Pelco Analytic Suites.

IXE20 Series models are

OV Analytic Suites.

are easy to configure for alarm notification

®

or a third-party system that supports Pelco’s

OV Analytic

offers rule configurations and alarm notifications that are

OV Ready

™

systems.

Camera

The

IXE20 Series

night. Both models feature advanced low-light technology
capabilities. The day/night model has a mechanical IR cut filter for
increased sensitivity in low-light installations.

The

IXE20 Series

two streams can be compressed in MJPEG and H.264 formats across
several resolution configurations. The extended platform gives real
time video (30 ips) with HD resolution using H.264 compression for
optimized bandwidth and storage efficiency. The streams can be
configured to a variety of frame rates, bit rates, and GOP (group of
pictures) structures for additional bandwidth administration.

has two 2.1 megapixel models: color and day/

can support two simultaneous video streams. The

Web Interface

The

IXE20 Series

uses a standard Web browser for powerful remote
setup and administration. Up to 16 cameras can be viewed on the
same network.

Window Blanking

Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. The

IXE20 Series

supports up to
four blanked windows. A blanked area will appear on the screen as
a solid gray window.

Video Systemization

The

IXE20 Series

such as Endura version 2.0 (or later) and Digital Sentry
(or later). The camera also features open architecture connectivity to
third-party software. Pelco offers an API for interfacing with Pelco’s
network cameras.

easily connects to Pelco IP and hybrid systems

International Standards

Organization Registered Firm;

ISO 9001 Quality System

®

version 4.2

C2955 / REVISED 1-15-10

TECHNICAL SPECIFICATIONS

PELCO ANALYTIC SUITES

Pelco Analytic Suites are offered in two distinct packages: the

Standard Suite

The Standard Suite allows you to run the Camera Sabotage behavior
plus one other behavior. The Enhanced Suite is capable of running up
to three behaviors at the same time. The number of behaviors is
limited to the available processing power of the camera.

Note:

Available processing power is determined by the settings for
compression standards, resolution, image rate, bit rate, and analytic
configuration. For each behavior, you can create several custom
profiles that contain different camera settings. With these profiles,
you can set up different scenarios for the behavior, which will
automatically detect and trigger alarms when specific activity is
detected.

Pelco Analytic Suites are configured with an Endura or API system,
which enables the behaviors to automatically detect and trigger
alarms when specific activity is detected. Multiple Pelco analytics
can be scheduled to work during a certain time or condition. For
example, during the day, a camera can be programmed with Object
Counting to count the number of people that enter a lobby door. At
night, the operator can change the profile to Camera Sabotage to
trigger an alarm if a camera is moved or obstructed. Each suite
includes the following behaviors:

•

Abandoned Object:

triggers an alarm if the object remains in the zone longer than the user­defined time allows. An airport terminal is a typical installation for this
behavior. This behavior can also detect objects left behind at an ATM,
signaling possible card skimming.

•

Adaptive Motion:

then triggers an alarm when the objects enter a user-defined zone. This
behavior is primarily used in outdoor environments with light traffic to
reduce the number of false alarms caused by environmental changes.

•

Camera Sabotage:

alarm is triggered if the lens is obstructed with spray paint, a cloth, or
covered with a lens cap. Any unauthorized repositioning of the camera
also triggers an alarm.

•

Directional Motion:

person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.

•

Loitering Detection:

defined zone longer than the user-defined time allows. This behavior is
effective in real-time notification of suspicious behavior around ATMs,
stairwells, and school grounds.

•

Object Counting:

or cross a tripwire. This behavior might be used to count the number of
people at a store entrance/exit or inside a store where the traffic is light.
This behavior is based on tracking and does not count people in a
crowded setting.

•

Object Removal:

defined zone. This behavior is ideal for customers who want to detect the
removal of high value objects, such as a painting from a wall or a statue
from a pedestal.

•

Stopped Vehicle:

than the user-defined time allows. This behavior is ideal for airport
curbside drop-offs, parking enforcement, suspicious parking, traffice lane
breakdowns, and vehicles waiting at gates.

and the

Enhanced Suite

Detects objects placed in a defined zone and

Detects and tracks objects that enter a scene and

Detects contrast changes in the field of view. An

Generates an alarm in a high traffic area when a

Identifies when people or vehicles remain in a

Counts the number of objects that enter a defined zone

Triggers an alarm if an object is removed from a

Detects vehicles stopped near a sensitive area longer

.

OBJECTVIDEO (OV) ANALYTIC SUITES

ObjectVideo Analytics Suites are preloaded on selected IXE20 Series
cameras and require an OV Ready system to configure the behaviors
for alarm notification.

OV Security Suite

The OV Security Suite is easy to use and includes Tripwire Detection,
Inside Area Detection, and Camera Tamper Detection behaviors.

• Tripwire Detection identifies objects that cross a user-defined line drawn
within the camera’s field of view.

• Inside Area Detection identifies objects entering, appearing, or moving
within a user-defined area.

• Camera Tamper Detection identifies significant contrast changes in the
camera’s field of view; for example, if the lens is obstructed by spray
paint, a cloth, or a lens cap.

OV Security Suite Plus

The OV Security Suite Plus includes the behaviors of the OV Security
Suite, plus Multi-Line Tripwire Detection, Loitering Detection, and
Leave Behind Detection behaviors.

• Multi-Line Tripwire Detection identifies objects that cross two defined
lines and generates an event based on defined parameters, including
directionality. Defined parameters for this behavior include direction,
sequential order, and time between crossing each tripwire.

• Loitering Detection identifies when people or vehicles remain within a
defined area beyond a specified period of time. This behavior is effective
for real-time notification of suspicious behavior around ATMs, stairwells,
and school grounds.

• Leave Behind Detection detects objects placed in a defined zone and
triggers an alarm if the object remains in the zone longer than the user­defined time allows.

OV Event Counting Suite

The OV Event Counting Suite uses advanced object calibration and
additional features for schedules, parameters, and multiple rules. The
suite includes behaviors for Tripwire Counting, Enters/Exits Counting,
Loiter Counting, Occupancy Sensing, and Dwell-Time Monitoring.

• Tripwire Counting counts people or objects that cross a user-defined line.

• Enters/Exits Counting calculates the number of people that enter and exit
an area without using a tripwire.

• Loiter Counting is useful in analyzing how frequently people stop in front
of a product, display, or other area of interest. This feature is also useful
in assessing promotion effectiveness and product interest.

• Occupancy Sensing counts people and generates a new value every time
the occupancy level changes. Since each occupancy output is time­stamped, the data can be used to determine average occupancy levels or
to correlate data to point-of-sale or other business scenarios.

• Dwell-Time Monitoring rules can be set up to record the length of time
between when an object enters and then exits an area. Along with queue
size information, wait times can also be assessed. This behavior can be
used to evaluate consumer interaction for a point-of-sale display or digital
advertisement.