Pelco IXE20 User Manual

PRODUCT SPECIFICATION

camera solutions

IXE20 Series Sarix® IP Camera

2.1 MEGAPIXEL EXTENDED PLATFORM HIGH DEFINITION DIGITAL CAMERAS

Product Features

• Open IP Standards

• Up to 2.1 Megapixel Resolution (1920 x 1080)

• Up to 30 Images per Second (ips) at 1920 x 1080

• Auto Back Focus

• H.264 and MJPEG Compression Capability

• Color and Day/Night Models

• Video Setup Jack

• Sensitivity Down to 0.03 Lux

• Power over Ethernet (IEEE 802.3af) or 24 VAC

• Up to 2 Simultaneous Video Streams

• Built-in Analytics

• Local Storage (Mini SD) for Alarm Capture

®

The

2.1 megapixel (MPx) network camera designed with industry-leading
image quality and high performance processing power. Designed to
install quickly, the camera includes automatic back focus control,
built-in analytics, and other advanced features needed for
demanding security applications.

Sarix

imaging performance, delivering high definition (HD) resolution,
advanced low-light capabilities, consistent color science, and fast
processing power. The H.264 compression video files are
considerably smaller, making HD video more affordable.

IXE20 Series extended platform (EP)

Sarix

technology defines the next generation of video security

is a

Camera

The

IXE20 Series

day/night. Both models feature advanced low-light technology
capabilities. The day/night model has a mechanical IR cut filter for
increased sensitivity in low-light installations.

The

IXE20 Series

two streams can be compressed in MJPEG and H.264 formats across
several resolution configurations. The extended platform gives
real-time video (30 ips) with HD resolution using H.264 compression
for optimized bandwidth and storage efficiency. The streams can be
configured to a variety of frame rates, bit rates, and GOP (group of
pictures) structures for additional bandwidth administration.

has two 2.1 megapixel models: color and

can support two simultaneous video streams. The

(LENS NOT SUPPLIED WITH CAMERA)

• Motion Detection

• Audio Accessory Available

Built-in Analytics

Pelco Analytics

IXE20 Series camera. Eight Pelco behaviors are preloaded and
included as standard features of the IXE20C and IXE20DN models.
Pelco behaviors can be configured and enabled using a standard Web
browser, and they are compatible with Endura
system that supports Pelco’s Analytics API system. Camera models
are also available with preloaded

enhance the flexibility and performance of the

®

or a third-party

OV Analytic Suites.

Web Interface

The

IXE20 Series

setup and administration.

uses a standard Web browser for powerful remote

Window Blanking

Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. The
four blanked windows. A blanked area will appear on the screen as
a solid gray window.

IXE20 Series

supports up to

Video Systemization

The

IXE20 Series

such as Endura version 2.0 (or later) and Digital Sentry
(or later). The camera is also compatible with Digital Sentry NVs
(DS NVs), a full-featured video management software, which is
available as a free download at www.pelco.com. DS NVs includes
four free Pelco IP licenses and allows for the management of video
from up to 64 cameras.

easily connects to Pelco IP and hybrid systems

®

version 4.3

The

IXE20 Series

third-party software. Pelco offers an application programming
interface (API) for interfacing with Pelco’s network cameras.

features open architecture connectivity to

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C2955 / REVISED 7-1-11

TECHNICAL SPECIFICATIONS

PELCO ANALYTICS

The IXE20 series includes eight user-configurable behaviors. The
camera is capable of running up to three behaviors at the same time;
although, the number of behaviors is limited to the available
processing power of the camera and the type of analytic being used.

Note:

Available processing power is determined by the settings for
compression standards, resolution, image rate, bit rate, and analytic
configuration.

For each behavior, you can create several custom profiles that
contain different camera settings. With these profiles, you can set up
different scenarios for the behavior, which will automatically detect
and trigger alarms when specific activity is detected.

Pelco Analytics are configured and enabled using a standard Web
browser, and Pelco behaviors are compatible with Endura or a
third-party system that supports Pelco’s Analytics API system.
Multiple Pelco behaviors can be scheduled to work during a certain
time or condition. For example, during the day, a camera can be
configured with Object Counting to count the number of people that
enter a lobby door. At night, the operator can change the profile to
Camera Sabotage to trigger an alarm if a camera is moved or
obstructed. Available Pelco behaviors include:

•

Abandoned Object:

triggers an alarm if the object remains in the zone longer than the
user-defined time allows. An airport terminal is a typical installation for
this behavior. This behavior can also detect objects left behind at an ATM,
signaling possible card skimming.

•

Adaptive Motion:

then triggers an alarm when the objects enter a user-defined zone. This
behavior is primarily used in outdoor environments with light traffic to
reduce the number of false alarms caused by environmental changes.

•

Camera Sabotage:

alarm is triggered if the lens is obstructed with spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.

•

Directional Motion:

person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.

•

Loitering Detection:

defined zone longer than the user-defined time allows. This behavior is
effective in real-time notification of suspicious behavior around ATMs,
stairwells, and school grounds.

•

Object Counting:

or cross a tripwire. This behavior might be used to count the number of
people at a store entrance/exit or inside a store where the traffic is light.
This behavior is based on tracking and does not count people in a
crowded setting.

•

Object Removal:

defined zone. This behavior is ideal for customers who want to detect the
removal of high value objects, such as a painting from a wall or a statue
from a pedestal.

•

Stopped Vehicle:

than the user-defined time allows. This behavior is ideal for airport
curbside drop-offs, parking enforcement, suspicious parking, traffic lane
breakdowns, and vehicles waiting at gates.

Detects objects placed in a defined zone and

Detects and tracks objects that enter a scene and

Detects contrast changes in the field of view. An

Generates an alarm in a high traffic area when a

Identifies when people or vehicles remain in a

Counts the number of objects that enter a defined zone

Triggers an alarm if an object is removed from a

Detects vehicles stopped near a sensitive area longer

OBJECTVIDEO (OV) ANALYTIC SUITES

ObjectVideo Analytics Suites are preloaded on selected IXE20 Series
cameras and require an OV Ready system to configure the behaviors
for alarm notification.

OV Security Suite

The OV Security Suite is easy to use and includes Tripwire Detection,
Inside Area Detection, and Camera Tamper Detection behaviors.

• Tripwire Detection identifies objects that cross a user-defined line drawn
within the camera’s field of view.

• Inside Area Detection identifies objects entering, appearing, or moving
within a user-defined area.

• Camera Tamper Detection identifies significant contrast changes in the
camera’s field of view; for example, if the lens is obstructed by spray
paint, a cloth, or a lens cap.

OV Security Suite Plus

The OV Security Suite Plus includes the behaviors of the OV Security
Suite plus Multi-Line Tripwire Detection, Loitering Detection, and
Leave Behind Detection behaviors.

• Multi-Line Tripwire Detection identifies objects that cross two defined
lines and generates an event based on defined parameters, including
directionality. Defined parameters for this behavior include direction,
sequential order, and time between crossing each tripwire.

• Loitering Detection identifies when people or vehicles remain within a
user-defined area beyond a specified period of time. This behavior is
effective for real-time notification of suspicious behavior around ATMs,
stairwells, and school grounds.

• Leave Behind Detection detects objects placed in a defined zone and
triggers an alarm if the object remains in the zone longer than the
user-defined time allows.

OV Event Counting Suite

The OV Event Counting Suite uses advanced object calibration and
additional features for schedules, parameters, and multiple rules. The
suite includes behaviors for Tripwire Counting, Enters/Exits Counting,
Loiter Counting, Occupancy Sensing, and Dwell-Time Monitoring.

• Tripwire Counting counts people or objects that cross a user-defined line.

• Enters/Exits Counting calculates the number of people that enter and exit
an area without using a tripwire.

• Loiter Counting is useful in analyzing how frequently people stop in front
of a product, display, or other area of interest. This feature is also useful
in assessing promotion effectiveness and product interest.

• Occupancy Sensing counts people and generates a new value every time
the occupancy level changes. Since each occupancy output is
time-stamped, the data can be used to determine average occupancy
levels or to correlate data to point-of-sale or other business scenarios.

• Dwell-Time Monitoring rules can be set up to record the length of time it
takes an object to enter and exit an area. Along with queue size
information, wait times can also be assessed. This behavior can be used
to evaluate consumer interaction for a point-of-sale display or digital
advertisement.