Pelco IXE10C-OSP, IXE10DN12 Specsheet

PRODUCT SPECIFICATION

camera solutions

IXE10 Series Sarix™ EP Network Camera

1.3 MEGAPIXEL EXTENDED PLATFORM HIGH DEFINITION DIGITAL CAMERAS

Product Features

• Open IP Standards

• Up to 1.3 Megapixel Resolution (1280 x 1024)

• Up to 30 Images per Second (ips) at 1280 x 720

• Auto Back Focus

• H.264 and MJPEG Compression Capability

• Color and Day/Night Models

• Video Setup Jack

• Sensitivity Down to 0.03 Lux

• Power over Ethernet (IEEE 802.3af) or 24 VAC

• Up to 2 Simultaneous Video Streams

• Built-In Analytics

• Local Storage (Mini SD) for Alarm Capture

• Motion Detection

• Audio Accessory Available

(LENS NOT SUPPLIED WITH CAMERA)

The

IXE10 Series extended platform (EP) camera with Sarix

technology

industry-leading image quality and high performance processing
power. Designed to install quickly, the camera includes automatic
back focus control, built-in analytics, and other advanced features
needed for demanding security applications.

Sarix

imaging performance, delivering high definition (HD) resolution,
advanced low-light capabilities, consistent color science, and fast
processing power. The H.264 compression video files are up to
20 times smaller making high definition video more affordable.

is a 1.3 megapixel (MPx) network camera designed with

technology defines the next generation of video security

Camera

The

IXE10 Series

day/night. Both models feature advanced low-light technology
capabilities. The day/night model has a mechanical IR cut filter for
increased sensitivity in low-light installations.

The

IXE10 Series

two streams can be compressed in MJPEG and H.264 formats across
several resolution configurations. The extended platform gives real
time video (30 ips) with HD resolution using H.264 compression for
optimized bandwidth and storage efficiency. The streams can be
configured to a variety of frame rates, bit rates, and GOP (group of
pictures) structures for additional bandwidth administration.

has two 1.3 megapixel models: color and

can support two simultaneous video streams. The

™

Built-In Analytics

Pelco’s Camera Sabotage behavior is a standard feature of the
IXE10C and the IXE10DN. Camera Sabotage detects contrast
changes in the field of view. An alarm is triggered if the lens is
obstructed with spray paint, a cloth, or covered with a lens cap. Any
unauthorized repositioning of the camera also triggers an alarm.

Web Interface

The

IXE10 Series

remote setup and administration. Up to 16 cameras can be viewed
on the same network.

uses a standard Web browser for powerful

Window Blanking

Window blanking is used to conceal user-defined privacy areas that
cannot be viewed by an operator. The
four blanked windows. A blanked area will appear on the screen as
a solid gray window.

IXE10 Series

supports up to

Video Systemization

The

IXE10 Series

such as Endura
(or later). The camera also features open architecture connectivity to
third-party software. Pelco offers an application programming
interface (API) for interfacing with Pelco’s network cameras.

easily connects to Pelco IP and hybrid systems

®

version 2.0 (or later) and Digital Sentry® version 4.2

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C2954 / NEW 1-15-10

TECHNICAL SPECIFICATIONS

GENERAL

Imaging Device 1/3-inch (effective)
Imager Type CMOS
Imager Readout Progressive scan
Maximum Resolution 1280 x 1024
Signal-to-Noise Ratio 50 dB
Auto Iris Lens Type DC drive
Electronic Shutter Range 1~1/100,000 sec
Wide Dynamic Range 60 dB
White Balance Range 2,000° to 10,000°K
Sensitivity f/1.2; 2,850°K; SNR >24 dB

Color (33 ms) 0.50 lux
Color SENS (500 ms) 0.12 lux
Mono (33 ms) 0.25 lux

Mono SENS (500 ms) 0.03 lux
Weight (without lens) 1.14 lb (0.51 kg)
Shipping Weight 2.00 lb (0.90 kg)

ELECTRICAL

Port RJ-45 connector for 100Base-TX

Auto MDI/MDI-X
Cabling Type Cat5 or better for 100Base-TX
Power Input 24 VAC ±10% or PoE (IEEE 802.3af class 3)
Power Consumption <7 W
Current Consumption

PoE <200 mA maximum

24 VAC <295 mA nominal; <390 mA maximum
Local Storage Mini SD
Alarm Input 10 VDC maximum, 5 mA maximum
Alarm Output 0 to 15 VDC maximum,

75 mA maximum

Service Port External 3-connector, 2.5 mm provides

NTSC/PAL video output.

MECHANICAL

Lens Mount CS mount, adjustable
Camera Mount 0.25-inch (0.64 cm) UNC-20 screw, top and

bottom of camera housing

ENVIRONMENTAL

Operational Temperature 14° to 122°F (–10° to 50°C)
Storage Temperature 14° to 158°F (–10° to 70°C)
Storage Humidity 20% to 90%, noncondensing

SERVICE

PORT

FRONT VIEW, CAMERA ONLY

(OPENED TO EXPOSE SERVICE PORT)

LED

5.40

(13.67)

1.95

(4.90)

3.00

(7.59)

3.12

(7.92)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

3.37*
(8.53)

*FRONT COVER OPEN

REAR VIEW