Pelco IM-WMWT, IM-WMBL User Manual

INSTALLATION

IM-WMWT/IM-WMBL Wall Mount Adapter

C2244M-A (2/10)

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Only use attachments/accessories specified by the manufacturer.

6. Installation should be done only by qualified personnel and conform to all local codes.

7. Use only installation methods and materials capable of supporting four times the maximum
specified load.

8. Only use replacement parts recommended by Pelco.

2 C2244M-A (2/10)

Description

The IM-WMWT and IM-WMBL are indoor wall mount adapters designed for use with the IM Series indoor
network dome camera. The wall mount adapters offer full feedthrough connections for a clean installation
with no exposed wires.

MODELS

IM-WMWT Indoor white wall mount adapter

IM-WMBL Indoor black wall mount adapter

PARTS LIST

Qty Description

1 IM-WMWT or IM-WMBL wall mount adapter
1 Mounting Bracket
3 Screws, M4 x 16 mm, Phillips pan head
1 Installation manual

Installation tools, mounting hardware, and the following parts are required but not supplied:

Qty Description

1 IM Series network dome camera
1 IX-SC service cable

C2244M-A (2/10) 3

Installation

1. Attach the mounting bracket to the mounting surface with two fasteners of appropriate length
(fasteners not supplied).

2. Pull all wiring through the mounting bracket and wall mount adapter and terminate all wires (if not
already terminated).

3. Attach the IM-WMWT or IM-WMBL wall mount adapter to the mounting bracket (refer to Figure 1).

a. Align the top bracket cleats with the wall mount adapter cleats.

b. Align the bottom of the wall mount adapter with the bracket lip.

Figure 1. Installing the Wall Mount Adapter onto the Mounting Bracket

ì

Wall Mount Adapter Cleats

î

Bracket Cleats

ï

Bracket Lip

4 C2244M-A (2/10)