Pelco IMM12036-EBASUS, IMM12036-E-BASE, IMM12036-BASEUS, IMM12036-BASE, IMM12036-B1SUS Specsheet

PRODUCT SPECIFICATION

OPTERA IMM SERIES 180-DEGREE CAMERA

Optera™ IMM Series with SureVision™ 2.0

180°, 270°, 360° PANORAMIC, 12 MPX IP CAMERAS

Product Features

• Constant, seamless situational awareness

• Zoom in for detail live or retrospectively with client-side dewarping

• Multiple immersive PTZ views at video management system (VMS)

• Up to 12 Megapixel (4 x 3 MPx) resolution for better detail at

a distance

• Up to 30 frames per second (fps)

• Outstanding WDR and low-light performance at the same time

• Pelco H.264 Smart Compression Technology

• Eight Pelco video analytic behaviors

• Local storage (Micro SD)

• Pelco Camera Link

• ONVIF Profile S, Profile G, and Profile Q conformant

• Compatible with Pelco VideoXpert™, VideoXpert™ Professional,

Digital Sentry
partners

®

, Endura™ (In Tiled Mode), and third-party VMS

• Power over Ethernet Plus (PoE+)

• 3-year warranty

camera solutions

Optera™ IMM Series Multi-Imager Solution

The Optera™ IMM Series camera with SureVision™ 2.0 provides a
panomersive experience with seamless situational awareness which
provides stitched and blended panoramic views. The IMM Series
also enables you to zoom in for detail within multiple intuitive
immersive views from a video management system (VMS). Other
multi-imager solutions can be disjointed with separate streams out
of order. The IMM Series transparently integrates video across all
sensors in the camera, presenting a seamless user experience from
setup to viewing.

Camera

IMM Series camera options include 180-, 270-, or 360-degree
models. All models include a camera in a compact in-ceiling mount,
surface mount, or pendant enclosure that is ready to install. All
models feature a robust metal tamper-resistant design and carry an
IK10 impact rating for vandal resistance. The Environmental Vandal
model features worry-free use in a wide range of challenging
operating conditions. In-ceiling models have a back box that is
plenum rated per 2008 NEC article 300.22(C)(2).

Video with SureVision 2.0

The IMM Series offers the panomersive experience with outstanding
and industry leading image quality with SureVision 2.0 technology.
SureVision 2.0 delivers excellent low-light performance and true
wide dynamic range (WDR), consistently and simultaneously. With
superior WDR, anti-bloom technologies, 3D noise filtering and
advanced tone mapping, SureVision 2.0 makes the IMM Series
capable of delivering outstanding image quality in very challenging
lighting conditions.

Window Blanking

Window blanking is used to conceal user-defined privacy areas. The
IMM Series camera supports up to 32 blanked windows. A blanked
area appears on the screen as a solid gray window.

Video

The IMM Series provides near real-time capture with a frame rate of
up to 12.5 frames per second (fps) at full resolution or 30 fps at a
reduced resolution. This video is presented from the camera in
multiple streams that can be encoded in H.264 level 5.1 high profile
and constrained variable bit recording (CVBR) for efficient encoding
to conserve video storage and bandwidth.

Open and Integrated

Optera IMM Series cameras seamlessly connect to Pelco
VideoXpert, VideoXpert Professional, Endura (in Tiled Mode), and
Digital Sentry VMSs. The IMM Series integrates with major partner
video management systems through the Pelco API, Panomersive SDK
and through the ONVIF standard.

Built-In Analytics

The IMM Series features a full suite of eight Pelco video analytics
applied across a wide field of view. Pelco behaviors include
Abandoned Object, Adaptive Motion Detection, Camera Sabotage,
Directional Motion, Loitering Detection, Object Counting, Object
Removal, and Stopped Vehicle. These behaviors enable operators to
focus quickly on events and areas of interest.

Convenient Power

The IMM Series is designed with Power over Ethernet Plus (PoE+) to
simplify planning, wiring, and installation. PoE+ works with PoE+
enabled network switches or power injectors. PoE+ eliminates
separate power supplies, cabling, and increases camera availability
through an uninterruptable power supply (UPS).

International Standards

Organization Registered Firm;

ISO 9001 Quality System

C4015 / Revised 6-12-18

TECHNICAL SPECIFICATIONS

PELCO ANALYTICS BEHAVIORS

Optera IMM Series includes eight user-configurable behaviors.* The
camera is capable of running up to three behaviors simultaneously;
although, the number of behaviors is limited to the available
processing power of the camera and the type of analytic being used.

• Abandoned Object: Detects objects placed within a defined zone and

triggers an alarm if the object remains in the zone longer than the
user-defined time allows. An airport terminal is a typical installation for
this behavior. This behavior can also detect objects left behind at an
ATM, signaling possible card skimming.

• Adaptive Motion Detection: Detects and tracks objects that enter a

scene and then triggers an alarm when the objects enter a user-defined
zone. This behavior is primarily used in outdoor environments with light
traffic to reduce the number of false alarms caused by environmental
changes.

• Camera Sabotage: Detects contrast changes in the field of view. An

alarm is triggered if the lens is obstructed by spray paint, a cloth, or a
lens cap. Any unauthorized repositioning of the camera also triggers an
alarm.

• Directional Motion: Generates an alarm in a high traffic area when a

person or object moves in a specified direction. Typical installations for
this behavior include an airport gate or tunnel where cameras can detect
objects moving in the opposite direction of the normal flow of traffic or an
individual entering through an exit door.

• Loitering Detection: Identifies when people or vehicles remain in a

defined zone longer than the user-defined time allows. This behavior is
effective in real-time notification of suspicious behavior around ATMs,
stairwells, and school grounds.

• Object Counting: Counts the number of objects that enter a defined

zone. This behavior can be used to count the number of people at a store
entrance/exit or inside a store where the traffic is light. This behavior is
based on tracking and does not count people in a crowded setting.

• Object Removal: Triggers an alarm if an object is removed from a

user-defined zone. This behavior is ideal for customers who want to
detect the removal of high value objects, such as painting from a wall or a
statue from a pedestal.

• Stopped Vehicle: Detects vehicles stopped near a sensitive area longer

than the user-defined time allows. This behavior is idea for airport
curbside drop-offs, parking enforcement, suspicious parking, traffic lane
breakdowns, and vehicles waiting at gates.

* Simple Motion Detection is also available, and must be
configured from a VMS. When configured, the Web UI will display
“internal_motion_detection” in the list of existing analytic profiles.

PELCO’S H.264 SMART COMPRESSION TECHNOLOGY

Pelco’s H.264 Smart Compression Technology lowers bandwidth and
storage requirements, typically between 30% and 70%, depending
on the amount of motion in the scene.

Pelco’s Smart Compression Technology dynamically analyzes motion
occurring within live video in real-time, to intelligently compress the
information you don’t need, while retaining details with clear quality
in the areas that are important in the scene. By enabling Dynamic
GOP, an added feature of Smart Compression, the number of I-frames
are automatically reduced in scenes with low motion. Based on the
complexity of scenes and motion occurring, such as a store room that
has limited entry and exit, up to 70% bandwidth savings can be
achieved.

In addition, the camera has long term bit rate control. This can be
used to track over time bit rate demand in operational use and
recommend optimal settings that conserve storage while preserving
image quality.

PELCO CAMERA LINK

Pelco Camera Link technology brings together the best of two
flagship Pelco products: You get the seamless and continual
situational awareness of Optera across a wide space along with the
ability to automatically zoom in for great detail with nearby Spectra
Enhanced and follow people and vehicles closely.

We have an analytic behavior associated with this feature that
detects and tracks objects that enter a scene and passes this
information through Pelco Camera Link to a Pelco PTZ camera.

TECHNICAL SPECIFICATIONS

5.90

(2.32)

16.15 (6.36)

9.85

(3.88)

15.93 (6.27)

14.65
(5.76)

17.80
(7.00)

5.90

(2.32)

16.15 (6.36)

9.85

(3.88)

15.93 (6.27)

14.65
(5.76)

17.80
(7.00)

COMPONENT FEATURES

VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.

Indoor Vandal, In-Ceiling

• Single Back Box for Suspended or Hard Ceiling Applications

• Requires 8.26 cm (3.25 in.) Space Above Ceiling

• Minimum Ceiling Thickness 0.64 cm (0.25 in.); Maximum Ceiling Thickness

4.45 cm (1.75 in.)

• 3/4 in. NPT or 25 mm Conduit Attachments on Side and Top of Back Box

• Plenum Rated Back Box

• Alodine Aluminum Construction Meets IK10

• White or Black Finish

Indoor Vandal, Surface Mount

• Attaches to:
– Standard 4 in. Square Outlet Box and 2-Gang Electrical Box
– 3/4 in. NPT or 25 mm Conduit Attachments on Side Back Box
– Wire Entry through Grommet on Top of Back Box

• Alodine Aluminum Construction Meets IK10

• White or Black Finish

15.75 (6.20)

Indoor Vandal, Pendant

• 1-1/2 in. NPT Conduit/Pipe Attachment

• Alodine Aluminum Construction Meets IK10

• White or Black Finish

Environmental Vandal, In-Ceiling

• Single Back Box for Suspended or Hard Ceiling Applications

• Requires 8.26 cm (3.25 in.) Space Above Ceiling

• Minimum Ceiling Thickness 0.97 cm (0.38 in.); Maximum Ceiling Thickness

4.45 cm (1.75 in.)

• 3/4 in. NPT or 25 mm Conduit Attachments on Side and Top of Back Box

• Meets IP66 and NEMA Type 4X

• Plenum Rated Back Box

• Alodine Aluminum Construction Meets IK10

• Light Gray Finish

Environmental Vandal, Surface Mount

• Attaches to:
– Standard 4 in. Square Outlet Box and Standard 2-Gang Electrical Box
– 3/4 in. NPT or 25 mm Conduit Attachments on Side of Back Box.
– Wire Entry through Grommet on Top of Back Box

• Meets IP66 and NEMA Type 4X

• Alodine Aluminum Construction Meets IK10

• Light Gray Finish

Environmental Vandal, Pendant

• 1-1/2 in. NPT Thread for Use with Pelco Wall Mounts

• Meets IP66 and NEMA Type 4X

• Alodine Aluminum Construction Meets IK10

• Light Gray Finish

15.75 (6.20)

TECHNICAL SPECIFICATIONS

CAMERA

Imaging Device 1/3.2-in.
Imager Type CMOS
Imager Readout Progressive scan
Maximum Resolution

12 MP (4x) 2048 x 1536 x 4
Signal-to-Noise Ratio >50 dB
Sensitivity

Camera F-Stop Color (33 ms) Mono (33 ms)

180° f/2.0 0.2 lux 0.14 lux
270

° f/2.5 0.3 lux 0.2 lux

360

° f/2.5 0.3 lux 0.2 lux

Day/Night Capabilities Yes
Mechanical IR Cut Filter Yes, (ON/OFF/AUTO selectable) with

Wide Dynamic Range: >120 dB

different set points

LENS

Length

Camera F-Stop Length

180° f/2.0 4.8 mm
270

° f/2.5 2.7 mm

360

° f/2.5 2.7 mm

Field of View

Camera Horizontal FoV Vertical FoV

180° 180° 41°
270° 270° 73°
360° 360° 73°

AUDIO

Streaming Bidirectional: full or half duplex
Input/Output 600 ohm differential, 1Vp-p max. signal level
Compression G.711 PCM 8 bit, 8 kHz mono at 64 kbit/s

MECHANICAL

Dome Attenuation

Clear f/0.0 light loss

Smoked f/1.0 light loss
Pan Adjustable (All Models) 370°
Tilt Adjustable (180 Model) 0° - 180°

PHYSICAL

Weight Unit Shipping

In-Ceiling 1.5 kg (3.3 lb) 2.0 kg (4.3 lb)

Surface Mount 1.7 kg (3.9 lb) 2.0 kg (4.3 lb)

Pendant Mount 1.7 kg (3.9 lb) 2.0 kg (4.3 lb)

ELECTRICAL

Network Port RJ-45 connector for 1000Base-T

1 Gigabit/sec Auto MDI/MDI-X PoE+; Class 4
Cable Type Category 5 or better
Input Power PoE+ (IEEE 802.3at, Class 4)
Power Consumption

Without Heater 17 Watts
With Heater 23 Watts

Notice: Total camera power consumption

attached to a multi-port PoE+ switch must not

exceed the total PoE+ power provided by the

switch.
Local Storage Micro SD, SDHC
Alarm

Unsupervised Detects open or closed alarm state
Supervised Detects open and short alarm state with

Input 3.5 VDC maximum, 3.5 mA maximum

Relay Output ±32 VDC maximum, 150 mA maximum

external 1-kohm resistor to detect alarm

tampering

NETWORK

Users

Unicast Up to 20 simultaneous users depending on

Multicast Unlimited users H.264
Security Access Password protected
Software Interface Web browser view and setup
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),

Note: IPv6 supports mixed IPv4 and IPv6 installations, but not IPv6-only
deployments.

the resolution settings, and frame rate

UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6,
SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL,
SMTP, FTP, ARP, ICMP, and 802.1x (EAP)

VIDEO

Video Streams Set of streams to deliver full resolution views;

secondary stream that comprises a lower

resolution mosaic of above streams
Frame Rate(s) User selectable up to 30 fps
Video Encoding H.264 High, Main, or Base profiles; MJPEG

Bit Rate Default maximum for Constrained Variable

180° Model
270° Model
360° Model

(mosaic stream only)

Bit Rate (CVBR) at maximum resolution and

frame rate

Maximum Bit

Rate

28 Mbps 16 Mbps

25 Mbps 16 Mbps

25 Mbps 15 Mbps

Typical Bit Rate at

Recommended Settings

ENVIRONMENTAL

Operating Temperature

Indoor Vandal –10° to 50°C (14° to 122°F)
Environmental Vandal –40° to 50°C (–40° to 122°F)

†

Thermostatically controlled active heating and cooling.

Operating Humidity

Indoor Vandal 15 to 85%, RH noncondensing

Environmental Vandal 10 to 95%, RH condensing
Impact Resistance IK10 (20J)
Shock and Vibration EN50155 Category 1, Class B;

IEC 60068:2-6 and 2-27;

ISTA-2A, Sequence 5, MIL810G
Storage Temperature –40
Storage Humidity 15% to 85%, noncondensing

° C to 60° C (–40° F to 140° F)

RANGE GUIDANCE*

†

†

Detection

Classification

Recognition

Identification

*Range performance varies based on camera setup, lighting

conditions and display characteristics.

Requirement 180

20 Pix/m
(7 Pix/ft)

40 Pix/m

(13 Pix/ft)

60 Pix/m

(20 Pix/ft)
150 Pix/m

(49 Pix/ft)

° 270° / 360°

112 m

(319 ft)

56 m

(172 ft)

37 m

(112 ft)

15 m

(46 ft)

60 m

(172 ft)

30 m

(93 ft)

20 m

(60 ft)

8 m

(25 ft)

TECHNICAL SPECIFICATIONS

WEB CLIENT MINIMUM SYSTEM REQUIREMENTS

Processor Intel® Core™ i3 processor, 2.4 GHz
Operating System Microsoft Windows

Memory 4 GB RAM
Network Interface 100 Mbps (or greater)
Monitor Minimum of 1024 x 768 resolution,

Web Browser Internet Explorer

and 64-bit), or Window Vista

10.9 (or later)

16- or 32-bit pixel color resolution

®

Firefox

35 (or later), Google® Chrome 40

(or later)
WebGL 2.0 (or later)

®

10, Windows® 7 (32-

®

; or Mac® OS X

®

8.0 (or later) or Mozilla®

VMS MINIMUM SYSTEM REQUIREMENTS

Operating System Windows® 7 64-bit (or later)

Video Memory 2 GB
System Memory 8 GB
Processor Intel

®

Core™ i7 2.0 GHz (or better)

ANALYTICS

Open API The Pelco API can transmit behavior alarm

data to third-party applications.
Go to pdn.pelco.com

INTEGRATION

Pelco System Integration Pelco VideoXpert, VideoXpert Professional,

Digital Sentry, Endura (in Tiled Mode)

Open API Pelco API, Panomersive SDK,

ONVIF Profile S, G, and Q

SOFTWARE FEATURES

• Multilingual user interface: English, French, Italian, German, Spanish,
Portuguese, Russian, Chinese, Turkish

• 32 window blanks, configurable in size

• Password protection

• Snapshot with JPEG capture

• Text overlay metadata for camera name, time, date

CERTIFICATIONS/RATINGS

• CE, Class A

• FCC Part 15, Class A

• ICES-003, Class A

• UL/cUL Listed

•C-Tick

•KC

• CB Scheme ITE

• NEMA Type 4X, and IP66 rating (Environmental Vandal)

• RoHS, Lead Free, REACH

• NTCIP 1205

• IEC 62676 image quality measurement

TECHNICAL SPECIFICATIONS

Pelco, the Pelco logo, and other trademarks associated with Pelco products referred

to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the

ONVIF logo are trademarks of ONVIF Inc. All other product names and

services are the property of their respective companies.

Product specifications and availability are subject to change with out notice.

©Copyright 2018, Pelco, Inc. All rights reserved.

SYSTEM MODEL NUMBERS

Type Trim Color Field of View (FoV) Model

In-ceiling, indoor vandal

In-ceiling, environmental vandal gray IMM12018-1EI

Surface, indoor vandal

Surface, environmental vandal gray IMM12018-1ES

Pendant, indoor vandal

Pendant, environmental vandal gray IMM12018-1EP

In-ceiling, indoor vandal

In-ceiling, environmental vandal gray IMM12027-1EI

Surface, indoor vandal

Surface, environmental vandal gray IMM12027-1ES

Pendant, indoor vandal

Pendant, environmental vandal gray IMM12027-1EP

In-ceiling, indoor vandal

In-ceiling, environmental vandal gray IMM12036-1EI

Surface, indoor vandal

Surface, environmental vandal gray IMM12036-1ES

Pendant, indoor vandal

Pendant, environmental vandal gray IMM12036-1EP

white
black IMM12018-B1I

white IMM12018-1S
black IMM12018-B1S

180°

white IMM12018-1P
black IMM12018-B1P

white
black IMM12027-B1I

white IMM12027-1S
black IMM12027-B1S

270°

white IMM12027-1P
black IMM12027-B1P

white
black IMM12036-B1I

white IMM12036-1S
black IMM12036-B1S

360°

white IMM12036-1P
black IMM12036-B1P

IMM12018-1I

IMM12027-1I

IMM12036-1I

COMPONENT MODEL NUMBERS

Back Box Camera Base Module Lower Dome

IMMBB0-S Surface, indoor vandal, white IMM12018-BASE Indoor vandal, 180° IMMLD0-1 Indoor vandal, white trim, clear bubble
IMMBB0-BS Surface, indoor vandal, black IMM12018-E-BASE Environmental vandal, 180° IMMLD0-B1 Indoor vandal, black trim, clear bubble

IMMBB0-ES Surface, environmental vandal, gray IMM12027-BASE Indoor vandal, 270° IMMLD0-1E

IMMBB0-P Pendant, indoor vandal, white IMM12027-E-BASE Environmental vandal, 270° IMMLD0-0 Indoor vandal, white trim, smoked bubble
IMMBB0-BP Pendant, indoor vandal, black IMM12036-BASE Indoor vandal, 360° IMMLD0-B0 Indoor vandal, black trim, smoked bubble

IMMBB0-EP Pendant, environmental vandal, gray IMM12036-E-BASE Environmental vandal, 360° IMMLD0-0E

IMMBB0-I In-ceiling, indoor vandal, white
IMMBB0-BI In-ceiling, indoor vandal, black
IMMBB0-EI In-ceiling, environmental vandal, gray

RECOMMENDED MOUNTS

IMM-PNL 2' x 2' drop ceiling panel; replaces 2' x 2'

ceiling tile, white

IMM-CM Corner mount (outer) for use with WMVE-SR

OPTIONAL ACCESSORIES

POE1AT, POE4ATN, 1, 4, 8, and 16
POE8ATN, POE16ATN Channel PoE midspan
EC-3000C/U Series Ethernet over copper (EoC) extenders with

wall mount

IMM-DF5 DF5 kit for existing indoor DF5 enclosures

EC-4BY1SWC/U Series 4-port, self managed, PoE+ switch with

WMVE-SR Environmental vandal, pendant wall mount,

gray

WMVE-WT/BK Indoor vandal, pendant wall mount, white/

black

PA101 Pole adapter for use with WMVE-SR wall

mount

Environmental vandal, gray trim,
clear bubble

Environmental vandal, gray trim,
smoked bubble

true PoE+ to 30 W

extended uplink

Pelco by Schneider Electric

625 W. Alluvial, Fresno, California 93711 United States

USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com www.pelco.com/community